PROVISION OF SOAK WELL SEPTIC TANK WATER TANK WATER SUMP AND PUMPS NEAR SITE NO1 MAP PH II AT BABINA CANTT

Amount

Excavation over areas not exceeding 1.5M depth and getting out in Hard/ dense soil all as specified.

M&L plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L plain cement concrete 1:2:4 type B1 75mm thick (using 20mm graded stone aggregate) as in floor, Sub bases, paving etc complete all as specified and as directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

S & F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.

Use & waste of form work to sides of concrete foundations rafts etc, fair finished, flat all as specified.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc 200mm thick, fair finished , flat.

Use & waste of form work for flat fair finished to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter.

M&L reinforcement 10mm and over using TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

M&L reinforcement 6mm to 8mm TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

M&L reinforced cement concrete M-30 ( using 20mm graded stone aggregate) with WPC as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete.

M&L reinforced cement concrete M-30 (using 20mm graded stone aggregate) with WPC as in walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilaster and buttressesunder reamed piles and mass concrete.

M&L reinforced cement concrete M-30 (using 20mm graded stone aggregate) with WPC as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Removal of excavated material exc 250mtrs but n.exc 500mtrs and depositing where directed at a level of n.exc 1.5mtrs above the starting point in soil.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25cm in hard dense soil

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 with WPC, surfaces finished even & smooth using extra cement.

Supply only water proofing compound approved make.

M&L for preperation of newely plastered surfaces and applying two coats of cement based paint on new plaster surfaces over a priming coat all as specified.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete all as specified and as directed.

Supply,install testing and commissioning of centrifugal pumping set of capacity 10 HP, 3 phase 415 Volt electric driven of 30 mtr head & 850 LPM inclusive of PCC foundation and necessary fittings to suction and delivary and nutbolts as required and frame work as required at site all as specified and directed by engineer in charge.

Supply and laying in trenches and leckage testing for galvanised steel tubes medium grade including all fittings of 80 mm bore complete all as specified and directed.

Description all as per item no.23 here in before but of size 50 mm dia complete.

Description all as per item no.23 here in before but of size 40 mm dia complete.

Description all as per item no.23 here in before but of size 25 mm dia complete.

Description all as per item no.23 here in before but of size 20 mm dia complete.

Description all as per item no.23 here in before but of size 15 mm dia complete.

Supply and laying, testing of galvanised steel tubes medium grade 65 mm dia flanged type at both ends including all fittings and connecting to centrifugal pump for suction at one end and other end at foot valve complete all as specified and directed.

Supply & Fix valve sluice flanged type on both ends of class 1.6 PN and fixed to pipe of 80mm dia complete all as specified & directed by Engr- in- charge.

Supply & fix gun metal (ISI Marked)class-II globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe of 50mm bore complete all as specified & directed by Engr- in- charge.

Description all as per item no.31 here in before but of size 25 mm dia complete all as specified & directed by Engr- in- charge.

Description all as per item no.31 here in before but of size 20 mm dia complete all as specified & directed by Engr- in- charge.

Description all as per item no.31 here in before but of size 15 mm dia complete all as specified & directed by Engr- in- charge.

S&F cast Iron non return valves swing check single door pattern confirming to IS-5312 heavy duty ISI marked with CI drilled flanged ends (internally cast) including jointing materials complete such as rubber fiber board, insertion packing ring with requisite Nos of nuts, botlts and washers of reqd size etc for 80 mm nominal bore all as specified and directed.

Supply and fix cast iron foot Valve flanged end conforming to IS 4038 G.M body ring & Rubber flap lift type with CI stainer or MS stainerof size 65 mm (2.5”) dia all as specified & directed.

Supply and fix Cast Iron Air Valves PN-1.0 with double air Outlets, conforming to IS 14845 DS-I of size 80 mm dia bore and fixing up in galvanised Iron Water supply mains of size 80 mm dia.

Supply and fix Cast Iron Air Valves Pn-1.0 with double air Outlets, conforming to IS 14845 DS-I of size 50 mm dia bore and fixing up in galvanised Iron Water supply mains of size 50 mm dia.

M&L for Valve Pit of size 45x45x60cm (internal dimensions), stone masonry construction, including all necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus soil to a distance n.exc 50m and depositing where directed, PCC in (1:4:8), type C2 (Using 40mm graded crushed stone aggregate) in foundation, stone masonry in cement mortar 1:4, rendering,15mm thick in cement mortar (1:4), internally finished even and fair and pointing flush externally as the work proceeding in the same mortar Mild steel angle iron 75x75x6mm frame of MS sheet cover 5mm thick with handle and locking arrangement, painting all the exposed surface MS work with two coats of synthetic enamel paint of the tint as approved all the MS embedded in PCC with two coat of black bituminous paint suitable for 50mm dia complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

Supplying and fixing copper conductor 3 core pvc insulated & pvc sheathed flat cable of size 10 sqmm 1100 volts for connecting 3 phase motor complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core all as specified & directed.

Supply installation, commissioning and testing of LT panel, outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3mm thick mild steel sheet mounted, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 500 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs/gland complete al as specified and directed by Engr-in-Charge and also comprissing of following:- INCOMING: (i) MCCB 4P, 415 V, 40 Amps, 25 KA breaking capacity with thermal adjustable setting - 01 Nos (ii) Phase indication lights & control uses -01 set (iii) Aluminium bus bar 3 phase 4 strip suitable for 100 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves. OUTGOING (i) 20 amps 4 pole,MCCB ,10 KA breaking capacity with thermal adjustable setting - 02 Nos (ii) 15 amps 4 pole,MCCB ,10 KA breaking capacity with thermal adjustable setting - 01 Nos (iii)Phase Indication with led lamp (RYB) & control fuses set of three-01 Nos. (iv) Bus bar chamber with and including Aluminium strips ( 4 Nos) suitable for 100 Amps duly insulated ,wired & duly mounted on porcelain insulators (v) Multifunction digital meter CT operated suitable for showing voltage,current,Hz,KW,KWH etc. (vi)Cosmic star fully automatic star-delta starter(ASD) suitable for 10 HP motor including overload relay and single phase preventer/corrector -02 Nos

M & L for road cutting depth upto 1.5 mtr below the normal ground level to laying pipe lines cables etc across the road in horizontal position and making good the disturbed portion to match with the exising surfaces complete all as specified and directed.

M&L for boring for 200 mm dia recharge shaft from ground level to first water table level (15 to 20 mtr from ground level ) in any kind of soil strata strata including hard rock all as specified and directed ( 2x 200 mm bore of 20 mtr)

Supply and lowering Pipe PVC class “A” for water discharge into recharge well having fine cut slots of suitable size and number of 4 mm thick conforming to IS 13592 including special, OD 160 mm dia all as specified and directed.

M&L for filling corase sand in the water harvesting pit complete all as specified and directed.

M&L for filling pea gravel of size 5.0 mm to 10mm in the water harvesting pit complete all as specified and directed.

M&L for filling stone gritt of size 40 mm in the water harvesting pit complete all as specified and directed.

Excavation in trenches n exc 1.5 M wide and n exc 1.5 M in depth ;for foundation etc or for shafts ,wells, cesspits , manholes,pierholes etc in exc 10 sqm on plan and n exc 1.5 M in depth and getting out of hard/densile soil.

m/s gupta trading

m/s bobby enterprises