REPAIRS TO ROOFING, CEILING, FLOORING, TILING, PLUMBING, JOINERIES, BRICK WORK AND CERTAIN ALLIED WORKS AT MD/OTM ACCN OF ARO, MCO, ECHS, 7017 EME BN AND MES AREA UNDER AGE B/R-I RANCHI.

Amount

Disconnecting 500 ltrs existing tanks, setting aside (or lowering if required) for repairs, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scales and dirt, algae, fungus etc., from RCC/PVC water tanks and from mouth of pipes with bleaching powder etc., after dewatering/ draining water and removing vegetation around the tanks including writing with paint the date of cleaning on the tanks, complete all as specified and directed.

All as per item No 01 herein before but capacity exc 500 Ltrs & n. exc 1000 Ltrs

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site

Taking down shutters of any description (window /doors/ ventilators)area not exc 1 sqm complete all as specified and as directed.

All as per Item No 5 here in before but area exc 1 sqm but n exc 2 sqm each

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering.

S&F, 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts.

S&F, 6 mm thick asbestos cement two piece adjustable plain wing ridge fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

Fixing only 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Plain, galvanised, mild steel sheeting 0.63 mm thick class VIII, in ridges,hips, valley gutters,chajjas, drip and straight flashings with grade of zink coating 275

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed work including separating serviceable timber and set aside for reuse

M&L 2nd class hard wood in scantling clean sawn

All as per item No 15 but except wrought timber

Dismantling of wall and ceiling board any thickness/description including cover fillet complete.

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners complete all as specified and directed.

M&L 4mm thick non asbestos fibre desiner cement building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping.

S&F asbestos cement plain building board 4mm th fixed to timber framework with screws in ceiling including preparation of new A.C surface & applying three coat of white washing on ceiling

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought swan, secured with nails or beads of sectional area exc.6 sqcm & not exc. 13 sqcm, complete all as specified and as directed.

All as per item No 21 herein before but sectional area exc 13 sqcm & not exc 25 sqcm and fixed in repair.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path finished the concrete surfaces even and fair without using extra cement.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 75 mm thick as in Subase of floor, complete all as specified and directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement

S&F Glass dividing strips, 3 mm thick and 38 mm wide inserted in position

M&L Cement concrete type B1, 1:2:4(20mm graded aggregate) as in surface channels and drains including necessary formwork.

M&L extra for forming fair finishing to drain or channel, 30 cm inner girth in cement concrete, with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of brick wk masonry built in cement mortar including all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6

All as per item No 32 here in before but except bricks

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4

All as per item No 34 here in before but except bricks

Demolition of cement concrete (reinforcement) any description and position not other wise specifically.

M&L for providing precast RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in landings, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc .

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or sloping) rough finished complete.

M&L Mild steel bars 10mm dia TMT Bars and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to.

M&L Mild steel bars 8mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

M&L Pressed steel door frames of size 165 x 60 mm with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete all as specified

All as per item No 41 but size of rame 105x 60mm.

S & F for 2nd class hard wood plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats complete.

S&F 40 mm thick 1st class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S&F 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sash bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats

All as per item No 46 here in before ,but divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b).

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work complete.

M&L 18/19 mm thick Prelaminated particle board fixed in repair, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F, Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2010

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2010).

S&F in repair door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body.

S&F door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F floor door stopper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140 mm complete all as specified and directed.

S&F powder coated anodised/aluminium frame of size 65mm x 38mm x 1.00 mm thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes (window of frame 3 track wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel

All as per item No 60 herein before but 75 mm

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete.

All as per item No 62 here in before but 100 mm

S&F of 150 mm size aluminium handles cast type anodised.

All as per item No 64 here in before but 125mm

S&F Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed.

Cutting holes in brick walls built in cm or dismantling existing PCC bed block exc half brick but n.excone brick thick for inserting hold fast and making good dismantled portion in cm (1:3) complete all as directed at site.

M&L for hold fast made out of 25x3 mm MS flat iron.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete.

S&F in repairs 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed ,complete all as directed at site.

All as per item No 70 here in before but 75 mm

S&F in repairs 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

All as per item No 72 here in before but 100 mm

S&F in repairs extruded aluminium handles, fabricated type polished , 150 mm long.

All as per item No 74 here in before but 100 mm

S&F in repair Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed.

S&F Continuous (piano) hinges 30mm, mild steel, bright finish or electrogalvanised

Re-securing or easing and adjusting without taking down wooden shutter of any description not exec 1sqm each complete all as specified and directed.

Re-securing or easing and adjusting without taking down wooden shutter of any description exec 1sqm but not exec 2 sqm each complete all as specified and directed.

S&F 100 mm Hasp & staples mm safety type aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F as in repairs Steel ventilator with top hung shutter including hinges steel peg stay, complete.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples all as spd and directed by Engr-In-Charge .

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

All as per item No 87 herein before but as in repaire

S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as spd and directed by Engr-In-Charge .

All as per item No 89 here in before but 4 mm thick figured glass pin headed type n.exc 0.50 sqm each complete.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square exc. 0.5 sq. m in each pane

S&F in repair 20mm MS tube powder coated as in curtain rod incl decorative type bracket fixed to wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even, complete all as specified and as directed.

M&L, 10mm thick rendering on fair faces of brick work/concrete surfaces of wall in CM (1:4) for laying wall tiles, surface finished even & fair complete all as specified and as directed.

M&L vitrified tiles of light colour shade 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed.

All as per item No 96 here in before but in vertical surface as dado/ skirting

M&L non-skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and as directed.

M&L non-skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed.

M&L Chequered cement concrete tiles 25cm x 25cm x 22 to 25 mm thick,with grey cement and no pigment set, jointed and pointed in neat cement over 20mm thick screed in CM (1:6), complete all as specified and as directed

M&L, glazed ceramic coloured tiles of size 300 X 200 X 7mm mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and as directed.

M&L, glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons

M&L 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and as directed.

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete all as directed complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and as directed.

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete all as directed complete all as specified and as directed.

Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe

S&F in repair PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, fixed to walls

S&F in reapir 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints fixed to wall and floor including taking out old broken/unserviceable pipe of any description including fittings complete.

S&F PVC bends any radius 110 mm dia

S&F in reapir 75 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints fixed to wall and floor including taking out old broken/unserviceable pipe of any description including fittings complete.

S&F PVC (SWR) 75 mm bore bends of any radius

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete all as specified and as directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to anti syphonage pipe etc complete including making good to floor.

S&F in repair vitreous china pedestal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor complete, all as specified and as directed.

S&F, in repair 10 Ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket, complete all as specified and as directed.

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends, complete all as specified and as directed.

S&F CP soap tray fixed with rawl plugs complete.

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F inrepair bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-105gms)

S&F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union all as specified & directed

S&F Chromium plated toilet paper holder with flap of standard size as approved by Engineer-in-charge.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed by Engr-in-charge.

S&F in repair viterous china bowl urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed

S&F 32 mm dia waste pipe fixed in repairs

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178)

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC..(make- Essco, cat no SQT-516KN)

S & F in repair PVC cabinet mirror box type of size 355 x 455 mm all as directed by EIC (Make-prayag)

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste pipe.

S&F in repair stainless steel plate rack 1mm thick of size 750X600x250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces, complete all as specified and directed.

S&F Chromium plated 600mm long towel rod with brakets as approved by EIC.

S&F in repair white EWC seat cover all as specified.

S&F CP Health faucet with 1 Meter PVC Tube and hook

S&F grating doom 100mm dia PTMT min weight 25gm fixed in repair

S&F in repair 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over two coats of wall care putty complete all as directed.

M&L preparation of old surface of wall and applying one coat of oil bound distemper complete all as specified and as directed.

M&L preparation of old surface of ceiling and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment and applying a coats of wall care puttly as directed and complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over pre prepare wall surface complete

M&L preparation of new surface of wall and applying three coats of white wash, complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and as directed.

M&L, applying one coats of synthetic enamel paint on old wooden surfaces of any description exc 10cm width or girth not otherwise described complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L, applying one coats of synthetic enamel paint on old steel surface of any description over 10cm width or girth not otherwise described incl preparation of surface complete all as specified and as directed.

M&L One coat White wash on old plastered or concrete surface including prepration of surface

S&F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

BUILDCON ENTERPRISES

M/S mahabirsahu

Rajeev Ranjan

india trading company