Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹26.7 L+₹1.8 L (7.11%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹27.8 L+₹2.9 L (11.6%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jaisalmer
GE (AF) Jaisalmer
Comprehensive maint works in Technical area at Air Force Station Jaisalmer
2022_MES_538566_2
8841/GE/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Jaisalmer
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Jaisalmer
₹50,000
Yes
24 Sept 2022
16 Aug 2022
9 Sept 2022
16 Aug 2022
7 Sept 2022
24 Aug 2022
Amount
Coloured glazed ceramic tiles 300mm x 200mm x 6-7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement and sand mortar (1:4) and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.
Coloured Non Skid ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling and cement mortar bedding complete all as specified and directed
Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed
Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed
Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified
20mm thick black granite slab/ tiles in floors/treads etc, set & jointed with neat cement slurry over and including 15mm thick screed bed in cement mortar (1:6) and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed.
20mm thick black granite (of any type) work as in skirting/risers over and including 10mm thick screed bed (backing coat) in cement and sand mortar 1:4, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including cutting and polishing (mirror polish i.e. full granite polish as per local trade practice) including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified & directed.
Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.
75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as floor and plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.
Machine pressed factory made rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope complete all as specified and directed.
Factory made chequered cement concrete tiles, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in cement and sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.
Squared rubble walling, Jodhpur type regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.
All as per serial item No. 12.00 here-in-before but except stone complete all as specified and directed.
Extra over stone walling for hammer dressing with maximum dipression on face from sraight edge held against the dresses surface n exc 20mm and dressing of face beds and joints as specified to square rubble walling, jodhpur type, brought upto courses complete all as specified and directed.
Keyed pointing in cement and mortar (1:4) to square rubble masonry coursed or brought upto courses etc complete all as specified and directed.
Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.
Rendering 15mm thick in cement and sand mortar (1:4) on stone masonry or concrete block masonry surfaces other than fair faces of concrete/brick and finished even and smooth (without using extra cement) including taking down cement plaster complete all as specified and directed.
Rendering 10mm thick in cement and sand mortar (1:6) on stone masonry or concrete block masonry surfaces and finished even and smooth (without using extra cement) including taking down cement plaster complete all as specified and directed.
5mm thick cement plaster in cement and sand mortar (1:3) on concrete surfaces of ceiling, soffits of chajjas/drop & roof projection facia finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.
Dubbing out in cement and sand mortar (1:6) average 10mm thick on irregular face of walls/ceiling complete all as specified and directed.
Applying wall care putty to smooth finish on wall/ceiling surfaces complete all as specified and directed.
Preparation of newly plastered or unplastered of wall surfaces and applying two coats of cement base paint over a coat of cement primer of any colour complete all as specified and directed.
Preparation of newly plastered or unplastered surfaces of ceiling, soffits of chajjas/drop & roof projection facia and applying three coats of white wash complete all as specified and directed.
Preparation newly plastered surfaces or unplastered surfase of walls and applying two coats of distemper oil emulsion over a coat of cement primer complete all as specified and directed.
Preparation of old decorated surfaces of wall by washing, rubbing down and stopping of painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed.
Preparation of old treated/decorated external wall/roof surfaces of any storeys/height upto 10m of any description and applying one coat of exterior emulsion paint (weather coat) over a coat of primer 1st quality in different tints/shades in sigma/camouflaging pattern as approved complete all as specified and directed.
Anodized aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 60mm long with including 12mm thick gypsum board in ceiling fixed with screws as per manufacturers instructions including taking down/dismentling of false ceiling boards complete all as specified and directed.
Anodized aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mmx 600mm in size, fixed with nail to timber frame work or with staples on snap grid in ceiling, flat or sloping and including dismantling and taking down old unserviceable ceiling board complete all as specified and directed.
Solid PVC wall panelling/ Lining consisting of 5mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc., complete all as per specifications and including taking down of wall panelling with frame and E/M fitting/Fixtures complete all as specified and directed. Note:- Rates shall be inclusive of refixing of dismantle of E/M fittings and fixtures.
5mm thick PVC sheet fillet of width 35mm with 'U' shape groove of 2mm depth at centre for wall panelling inclusive of fixing on to wall to make to make PVC frame as per specification complete all as specified and directed.
Galvanized, corrugated mild steel sheet 0.63mm thick with two corrugation side lap, fixed with L-type or J-Type or cranked hook bolt and washers as in wall claddings etc. with grade of Zinc coating 275, including dismantling of old unserviceable sheet complete all as specified & as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50sqm but not exceeding 4.00sqm each complete all as specified and directed.
Taking down shutters any description area not exceeding 1.00 sqm each complete all as specified and directed.
Taking down shutters any description area exceeding 1.00 sqm each but not exceeding 2.00 sqm each complete all as specified and directed.
Refixing old shutter in the same opening after resecuring or easing & adjusting of shutters of any description area exceeding 1.00 Sqm each and not exceeding 2.00 sqm each complete all as specified and directed.
Factory made 30mm thick flush shutter, solid core construction, with block boards core and plywood face panels, commercial type on both sides (ISI Marked) fixed to chowkhats complete all as specified and directed.
Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165 (Fe-290), drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooken and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing in position complete all as specified and directed. Note : Cost of welding butt hinges to the door frame deemed to included in quoted rate and butt hinges shall be measured & paid for “Supply only” separately under relevant item of this schedule.
Factory made Second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.
Wood grain printed 1mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.
Stainless steel wire cloth 0.56mm nominal dia of wire and average width or aperrture 1.18mm and fixed with tinned tacks or stainless steel wire staples fixed complete all as specified and directed.
Stainless steel wire cloth 0.56mm nominal dia of wire and average width or aperrture 1.18mm and fixed with tinned tacks or stainless steel wire staples fixed as in repair complete all as specified and directed.
100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.
100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) fixed as in repair complete all as specified and directed.
Mild steel Butt hinges, 100mm long complete all as specified and directed.
Hacking out old broken glass from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane and fixing new panes complete all as specified and directed.
4mm thick sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane and fixing new panes complete all as specified and directed.
Welding in repairs not exceeding 2.5cm in length, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.
Mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
Plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping and like including weathering slightly rounded or chamfered angles and throating and necessary formwork as required and finishing the top surface of concrete even and smooth without using extra cement complete all as specified and directed.
Easing and adjusting of steel window/ventilators including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.
Easing and adjusting of aluminium window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.
Easing and adjusting of aluminium door including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.
Easing and adjusting of steel doors including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.
Easing and door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws complete all as specified and directed.
150mm long aluminium anodised barrel tower bolts of extruded section fixed as in repair complete all as specified and directed.
250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed as in repair complete all as specified and directed.
Aluminium handle 125mm long cast type, anodized fixed as in repair complete all as specified and directed
Plain aluminium sheet 0.56mm thick fixed with screw as in repair complete all as specified and directed
Mortice lock brass, vertical type, size 100mm 4 lever fixed as in repair complete all as specified and directed.
Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg, fixed as in repair complete all as specified and directed.
Mild Steel Door closer (Capsule type) ISI Marked as per sample fixed as in repair complete all as specified and directed.
Dismantling posts or struts (Wood, steel or RCC) any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling fencing wire mesh of any type of any description fixed to any type of chain link fencing posts complete all as specified and directed.
Excavating in post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface any type of soil complete all as specified and directed.
PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundations for concrete post/struts complete all as specified and directed.
PCC (1:2:4) Type B-2 (using 40mm graded stone aggregate) as in foundations and mass concrete complete all as specified and directed.
Fixing only mild steel galvanized chain link fencing of any wire mesh including line wires and type of standards rails, straining bolts etc. including provision of binding wire and fixing with MS angle iron fencing post complete all as specified and directed. Note:- Supply only chain link fencing shall be measured and paid for separately.
Supply only mild steel galvanized chain link fencing of oblong wire mess size 100x100mm with weight not exceeding 4 Kg/Sqm complete all as specified and directed. Note:- (i) Flat iron, round bars, nut bolts and washer shall be measured and paid for separately.
Mild steel work of Fe-290 Gde E-165 as in angle iron fencing posts & flat iron drilled and countersunk for boulders running bars, including embedding in concrete and scruing etc, post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. complete all as specified and directed. Note:- The element of fixing of round bars for chain link fencing is included in this item.
Supply only round bars 10mm dia conforming to Fe-290 Gde E-165 let in and fixed independantly including hooking ends for securing wire mesh chain link fencing as in bearing bars complete all as specified and directed.
Galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins fixed as in repair complete all as specified and directed. Note:- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.
Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
Prepariation of newly or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even complete all as specified and directed.
100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.
Glass dividing strips, 38mm wide and 3mm thick, inserted in position, conform to design complete all as specified and directed.
Cleaning and removing all sluge, mud, scale and dirt with bleaching powder from tanks and form mouths of circulating pipes, etc water tank capacity from 500 litre but not exceeding 1000 litre and writing the date of cleaning with synthetic enamel paints complete all as specified and directed
Curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers fixed as in repair complete all as specified and directed.
6mm thick plywood grade BWR, type BB for covering of window complete all as specified & as directed.
12mm thick plywood grade BWR, type BB for covering of window complete all as specified & as directed.
APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) land on primed surface by LPG torched application over applying evenly one coat of binding material using blown type bitumen confirming to IS-702 grade 85/25 at the rate 1.20 Kg/Sqm over one coat of cold bitumenous oil based primer (IS : 3384) at the rate 250gm/sqm including cleaning surfaces with 10mm thick plaster in cement and mortar (1:4) on fair face of concrete surfaces, finished even and smooth without using extra cement with water proofing compound including dismentling/taking down existing complete all as specified and directed. Note : Water proofing compound will be measured and paid for seperately.
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
Plain cement concrete (1:3:6) Type C-1, (using 20mm graded stone aggregate) as in roof padding surface fair finished even and smooth without using extra cement complete all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified & as directed.
S K TRADER
M/s RKG CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .