(Moulik Nidhi) Construction of C.C. Road and Nali and Maintenance at Vibhin Sthano Par Ward 09 Zone 02.File No.39/26X3/6.

Excavation by Manual Means Excavation for roadway in soil including loading and unloadingin/from truck for carrying suitable cut earth to embankment site and disposing off unsuitable earth with alllift sand lead up to 1000 Meter as per Section-300 of the specifications.

Transportation by Mechanical means including loading,unloading and stacking Sand, stone aggregate below 40 mm nominal size 2 km

Providing and Laying Cement Concrete Grade M-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes,separation membrane125micronthick,including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm). (for road) FOR DRAIN BASE FOR DRAIN WALL

Centering and shuttering including strutting, propping etc.and removal of form for(A) :Foundations, footings, bases of columns, etc. For mass concrete.

Cement Concrete Hume pipes Providing and laying non-pressure NP3 class (Medium duty) cement concrete Hume pipes for service ducts below concrete pavement or other similar work, collar jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand).Size 600 mm dia.meter

providing Brick masonry work in1:3 (1cement:3sand)with well burnt chimney bricks (crushing strength not less than 40kg /sqcm and water absorption not more than 15%) insub-structure complete excluding pointing and plastering, as per drawing and technical specifications.

Plastering with cement mortar (1:3) on brick work in sub-structure as per Technical specifications.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP :34) etc. complete.Mild steel and Medium Tensile steel bars.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Two or more coats on new work.

Providingand layingvitrified floor tiles (without Solublesalt) or printed (withsolublesalt)Nanopolished (Glossy finish) indifferent sizeswith water absorption less than 0.05%and conforming to IS : 15622 of approvedmake inall colours&shades, Ist quality/ premiumquality in flooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) includinggrouting the jointswithwhitecement andmatchingpigments etc. complete. Size 600x600mm as per manufacturer specification.

a) Short point

b) Medium point

c) Long point

12 mm cement plaster of mix: 1:6 (1 cement: 6 sand)

Please Enable Macros to View BoQ information