Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 LAccepted-AOC | ₹15.4 L Quoted ₹17.0 L | L1 | Accepted-AOC Lowest and reasonable bid |
| 2 | L2₹17.1 L+₹12,375 (0.73%)Rejected-Finance | ₹17.1 L+₹12,375 (0.73%) | L2 | Rejected-Finance Other than the lowest bid |
| 3 | L3₹17.2 L+₹20,670 (1.22%)Rejected-Finance 5B FF NAND VIHAR AZAD NAGAR NEAR GODARA PETROL PUMP HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | ₹17.2 L+₹20,670 (1.22%) | L3 | Rejected-Finance Other than the lowest bid |
| 4 | L4₹17.5 L+₹51,360 (3.03%)Rejected-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | ₹17.5 L+₹51,360 (3.03%) | L4 | Rejected-Finance Other than the lowest bid |
| Sl No | Description | Qty | Unit | GLOBAL ENGINEERS AND INNOVATORS L1 | SUN MANN ENGINEERS L3 | Rakesh Dhingra Contractor L2 | J.K & Company L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down ceiling fans carefully after removing electrical connection of any make and size, bringing to MES workshop, dismantling blades washing of fan body and blades with proper detergent, opening of fan motor and greasing and oiling/overhauling of ball bearing and bushes respectively complete including replacement of defective unserviceable ball bearing & bushes reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1 sqmm copper flexible wire, fan capacitor 2.5/3.15 MFD, capacitor holding clamp PVC connector, cannopies rubber reel hanging clamp with 12mm dia nut bolt etc of suitable length, split pins heavy duty of sizes locking screws & fan blades fixing screws if found unserviceable /defective including refixing fan at required location all as specified and directed.
Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, canopies, rubber reel holding clamp, split pin, bearings/ bushes & screws etc shall measured & paid separately. | 3,000 | Each | 40 ₹1,20,000 | 45 ₹1,35,000 | 40 ₹1,20,000 | 25 ₹75,000 Lowest |
| 2.00 | Taking down exhaust fans/wall fan/padestial fan carefully after removing electrical connection of any make and size, bringing in to MES workshop, dismantling blades, washing of fan body and blades with proper detergent, opening of fan motor, overhauling, oiling and greasing of ball bearing and bushes respectively complete including replacement of defective unserviceable ball bearing & bushes, reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1 sqmm copper flexible wire, fan capacitor 2.5/3.15/4 MFD, capacitor holding clamp PVC connector screws & fan blades fixing screws if found unserviceable /defective including refixing the exhaust fan at required location all as specified and directed.
Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately. | 1,220 | Each | 40 ₹48,800 | 45 ₹54,900 | 40 ₹48,800 | 21 ₹25,620 Lowest |
| 3.00 | Dismantling of ceiling fan of following size of any make, taking out old burnt winding wires cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of ceiling fan with suitable copper wire complete, including insulation with copper enameled wire size as per existing providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp canopies locking screws split pin rubber reel holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required) complete all as specified and directed :-
Note :- Spare parts such as copper flexible wire, fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately.
1200 mm sweep complete all as specified and directed. | 1,200 | Each | 425 ₹5,10,000 | 395 ₹4,74,000 | 340 ₹4,08,000 Lowest | 490 ₹5,88,000 |
| 4.00 | 1400 mm sweep complete all as specified and directed. | 200 | Each | 450 ₹90,000 | 420 ₹84,000 | 340 ₹68,000 Lowest | 495 ₹99,000 |
| 5.00 | Dismantling of exhaust fan of following size of any make, taking out old burnt winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of exhaust fan with suitable size of copper wire complete, including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp locking screws split pin rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc, complete all as specified and directed.
Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately :-
18" sweep (450mm) | 40 | Each | 600 ₹24,000 | 750 ₹30,000 | 350 ₹14,000 Lowest | 490 ₹19,600 |
| 6.00 | 15" sweep (375mm) | 10 | Each | 550 ₹5,500 | 650 ₹6,500 | 350 ₹3,500 Lowest | 490 ₹4,900 |
| 7.00 | 12" sweep (300mm) | 400 | Each | 450 ₹1,80,000 | 450 ₹1,80,000 | 290 ₹1,16,000 Lowest | 495 ₹1,98,000 |
| 8.00 | Supply & fix in replacement of burnt out cabin fan motor of any size of any make, reassembling the new fan motor including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire complete all as specified and directed. | 20 | Each | 600 ₹12,000 | 500 ₹10,000 Lowest | 500 ₹10,000 Lowest | 680 ₹13,600 |
| 9.00 | Dismantling of wall mounting fan of any size of any make, taking out old burnt winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of wall mounting fan complete, including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp locking screws split pin rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required) complete all as specified and directed.
Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately. | 40 | Each | 400 ₹16,000 | 580 ₹23,200 | 250 ₹10,000 Lowest | 700 ₹28,000 |
| 10.00 | Supply & Fixing of the following spare parts complete all as specified and directed :-
Ball bearing of adequate size | 1,200 | Each | 25 ₹30,000 Lowest | 65 ₹78,000 | 80 ₹96,000 | 55 ₹66,000 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
24 Jun 2025, 6:00 pmClosed
GE (WEST) JALANDHAR CANTT
KABIR ROAD JALANDHAR CANTT
REPAIR MAINT OF CEILING FAN EXHAUST FAN WALL FAN OF OTM ACCN UNDER GE (W) JRC
2025_MES_711114_1
GE/JAL(W)-15/2025-26
Open Tender
Civil Works
Item Rate
335 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST)
₹40,000
Yes
23 Sept 2025
29 May 2025
1 Jul 2025
29 May 2025
24 Jun 2025
12 Jun 2025
Amount
Taking down ceiling fans carefully after removing electrical connection of any make and size, bringing to MES workshop, dismantling blades washing of fan body and blades with proper detergent, opening of fan motor and greasing and oiling/overhauling of ball bearing and bushes respectively complete including replacement of defective unserviceable ball bearing & bushes reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1 sqmm copper flexible wire, fan capacitor 2.5/3.15 MFD, capacitor holding clamp PVC connector, cannopies rubber reel hanging clamp with 12mm dia nut bolt etc of suitable length, split pins heavy duty of sizes locking screws & fan blades fixing screws if found unserviceable /defective including refixing fan at required location all as specified and directed. Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, canopies, rubber reel holding clamp, split pin, bearings/ bushes & screws etc shall measured & paid separately.
Taking down exhaust fans/wall fan/padestial fan carefully after removing electrical connection of any make and size, bringing in to MES workshop, dismantling blades, washing of fan body and blades with proper detergent, opening of fan motor, overhauling, oiling and greasing of ball bearing and bushes respectively complete including replacement of defective unserviceable ball bearing & bushes, reassembling the fan motor and testing complete including replacement of unserviceable defective spare parts such as 3 core 1 sqmm copper flexible wire, fan capacitor 2.5/3.15/4 MFD, capacitor holding clamp PVC connector screws & fan blades fixing screws if found unserviceable /defective including refixing the exhaust fan at required location all as specified and directed. Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately.
Dismantling of ceiling fan of following size of any make, taking out old burnt winding wires cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of ceiling fan with suitable copper wire complete, including insulation with copper enameled wire size as per existing providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp canopies locking screws split pin rubber reel holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required) complete all as specified and directed :- Note :- Spare parts such as copper flexible wire, fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately. 1200 mm sweep complete all as specified and directed.
1400 mm sweep complete all as specified and directed.
Dismantling of exhaust fan of following size of any make, taking out old burnt winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of exhaust fan with suitable size of copper wire complete, including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp locking screws split pin rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc, complete all as specified and directed. Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately :- 18" sweep (450mm)
15" sweep (375mm)
12" sweep (300mm)
Supply & fix in replacement of burnt out cabin fan motor of any size of any make, reassembling the new fan motor including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire complete all as specified and directed.
Dismantling of wall mounting fan of any size of any make, taking out old burnt winding wires, cleaning of slots, replacement of unserviceable ball bearing, bushes, rewinding of wall mounting fan complete, including insulation material E grading providing varnish, reassembling the fan after proper greasing of ball bearing, oiling of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible 3 core 1 sqmm wire, capacitor holding clamp locking screws split pin rubber holding clamp with 12mm dia nut bolt with washers, PVC connector 2 way and blade screws etc (if required) complete all as specified and directed. Note :- Spare parts such as copper flexible wire fan capacitor, capacitor holding clamp, PVC connector, Bolts Nuts, Split pin, bearings/bushes & screws etc shall measured & paid separately.
Supply & Fixing of the following spare parts complete all as specified and directed :- Ball bearing of adequate size
Gun metal bush of suitable size
Split pin
Capacitor holding clamp
Rubber reel
Painting ceiling fan of any size with one coat of milky white synthetic enameled spray paint of approved quality after preparation of surface, filling of cavities with metal putty, rewriting the MES No on the fan body with black paint complete all as specified and directed.
Supply & fixing in replacement fan capacitor of following sizes complete all as specified and directed :- 2.5 MFD
Supply and fix in replacement PVC Connector 3 way complete all as specified and directed.
Supply and replacement fan hanging clamp complete rubber reel nut bolt washer complete all as specified and directed.
Supply and fixing fan down rod made out of MS tubing company made 15 mm dia duly painted of following sizes complete all as specified and directed :- 60 cm long
90 cm long
120 cm long
M&L for mild steel fan hooks as in repair made out of MS flat 40x6mm MS nut bolts 12mm dia suitable for GI pipe wooden truss or MS channel as per requirement complete including installation in any position i.e open or inside the ceiling (cost of removing & refixing ceiling sheet included in the rates quoted against the items complete all as specified and directed.
Supply and fix in replacement PVC Exhaust fans AC single phase 230/ 240 V of size 230 mm sweep as required for fixing and electrical connection upto ceiling rose incl cutting holes if any complete all as specified and directed.
Supply & fix exhaust fan metalic body, Heavy duty, AC 230/240 V, 1200 to 1500 RPM of size 300 mm sweep with louvers, incl making opening in wall grouting the nut bolts for fixing the exhaust fan, cement work and making disturbed surface good, connecting to ceiling rose complete all as specified and directed.
M & L in repair for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4.0mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion all as specified and directed.
M & L for earthing in repair complete with copper earth plate, electrode 60cm x 60cm x 3.15mm thick, buried directly in ground vertically (earth pit not less than 4.65 m deep below normal ground level) with top edge of the plate not less than 3.75 m below normal ground level connecetd to earth lead of copper strip 20 x 3mm (from top of earth plate up to 7.5m above ground level) by means of bolts, nuts, check nuts, washers of brass with protection pipe of GI light grade 40mm bore and connected to earth test point, earth plate surrounded by packed homogeneous mix alternate layers of charcoal dust, common salt and magnesium sulphaste 15mm thick all around upto height 120cm on top edge of plate and 30cm layer of magnesium sulphate over above layer and watering pipe 20mm bore GI light grade with funnel and wire mesh grade all as shown in electrical plate No 3 of SSR Part-I, testing on completion including PCC chamber (1:2:4), using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 using 20mm graded stone aggregate and 8mm dia TMT bars @ 100mm C/C and angle iron frame including excavation earthwork and returning filing etc, complete all as specified.
Supply & fixing in repair copper strip 20x3mm including all accessories i.e. Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required and directed.
M & L for GI wire 4 mm with GI protection pipe 15mm all as required and directed.
M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit, medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm, FRLS type, copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour all as specified and directed for :- One light / fan / call bell point controlled by one, one way switch.
S & F switch piano type 6 Amps, flush button type, SP, one way, 230 Volts, AC complete all as specified and directed.
M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed.
"Supply only" steel blade suitable for exhaust fan 300mm sweep complete all as specified and directed.
S&F exhaust fan louvers (louvers made of CRCA coated frame with flappers) suitable for 230mm sweep exhaust fan complete with necessary nut, bolt iron work complete all as specified and directed.
S&F XPM Jaali for wall opening of exhaust fan of size 300mm/380mm/ 450mm sweep of suitable size as directed.
"Supply only" top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and as directed.
"Supply only" blade of 1200mm sweep of ceiling fan complete all as specified and as directed.
"Supply only" blade of 1400mm sweep of ceiling fan complete all as specified and as directed.
Supply and fix in repair modular fan regulator step type 240 V, 120 W, 2 modules all as as per existing make & model.
Supply and fix ceiling fan regulator electronic rotary step type single phase A/C 230 volts complete all as specified and directed.
Supply and fix ceiling fan regulator for BLDC Fans as per existing fans single phase A/C 230 volts complete all as specified and directed.
Supply & fix in replacement of burnt out Motor controller PCB kit/ Mother board for BLDC fan of any size or any make reassembling the new fan kit including replacement of unserviceable fan kit, incl taking down & refixing fan, copper flexible 3 core 1sqmm wire complete all as specified and directed.
Rakesh Dhingra Contractor (BID ID -3326216)
SUN MANN ENGINEERS (BID ID -3335559)
J.K & Company (BID ID -3334228)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .