Procurement of Spare Parts for 200 TPD Poultry Feed Plant at Matigara, Darjeeling under WBLDCL for F.Y. 2025-26

List of Spares - PART - A

Jumbo Pellet Mill die – 600 X 700 X 222, 3mm DIA Hole-SS

Jumbo Pellet Mill Die for Layer Crumbs SS Chrome Die – 4 mm Dia hole Compression ratio 10-11

Jumbo Press Roll Shell – 180x250x182W

Jumbo Press Roll Assembly

Jumbo Shear Pin – 20Dia x 96L

Jumbo Die Fixing Bolt HT Hex – M20x160L (1 set = 12 Nos)

Jumbo Front Wearing Ring Bolt HT Hex Bolt – M20x50L (1 set = 12 Nos)

Jumbo Front Die Cover Bolt HT Hex Bolt – M20x40L – (1Set =4 Nos)

Jumbo Allen Bolt For Rear Wearing Ring – M24x55L – (1Set =12 Nos)

EN-8 Beater – 220L x 60W x 10thk (1 set = 96 Nos) (For HAMMER MILL – HS-140)

Sieve for Hammer Mill, 3mm dia Hole – 1552 x 830 mm x 3 mm thk

Spacer for Hammers-ID-28.5 x OD-39mm - 8mm thk - 48 Nos + 16mm thk - 48Nos + 34mm thk -48Nos + 80mm thk - 48Nos (1 Set = 192 Nos)

Carrying Rod for Hammer – 28 mm dia x 730 mm long (1 Set = 12 Nos)

Bearing for Hammer Mill – 23222CK + H2322 + SNA 522

Supply, Installation, testing & Commissioning of 150 HP Heavy duty VFD Panel with cables & accessories and synchronizing with plant automation. (For HAMMER MILL – HS-140)

Elevator Belt M24 x 3 ply. 3mm top & 1.5mm bottom rubber black – 300mm W (Miscellaneous)

Elevator Belt M24 x 3 ply. 3mm top & 1.5mm bottom rubber black – 350mm W (Miscellaneous)

Elevator Bucket – 10”x6”x5”x14G 3 holes of 8 mm dia (Miscellaneous)

Elevator Bucket – 12”x8”x6”x14G 5 holes of 10 mm dia (Miscellaneous)

M S Bucket Bolt Nut with emboss washer – M8 x 32 L (Miscellaneous)

M S Bucket Bolt Nut with emboss washer – M10 x 40L (Miscellaneous)

Double Acting Magnetic Cylinder 63NB x 500 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 63NB x 400 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 200NB x 40 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 40NB x 50 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 50NB x 100 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 150NB x 200 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 125NB x 200 stroke with fittings & 2 reed switch (Miscellaneous)

Double Acting Magnetic Cylinder 100NB x 160 stroke with fittings & 2 reed switch (Miscellaneous)

Seal Kit for 40 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 50 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 63 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 100 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 125 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 150 NB D/A Magnetic Cylinder (Miscellaneous)

Seal Kit for 200 NB D/A Magnetic Cylinder (Miscellaneous)

Sensor Bracket (Miscellaneous)

Proximity Sensor (Miscellaneous)

Chain Coupling MS – 1” x 14T (Miscellaneous)

Chain Coupling MS – 1” x 16T (Miscellaneous)

Chain Coupling MS – 1” x 20T (Miscellaneous)

Chain Coupling MS – 1” x 22T (Miscellaneous)

Chain Coupling MS – 1” x 24T (Miscellaneous)

Sprocket for chain conveyor -125P x 9T (Miscellaneous)

5/2 way single Solenoid Valve – 1/2” (Miscellaneous)

5/2 way single Solenoid Valve – 1/4” (Miscellaneous)

Chain for Chain Conveyor Size 250mm Wide x 125mm Pitch (Miscellaneous)

Chain for Chain Conveyor Size 285mm Wide x 125mm Pitch (Miscellaneous)

Chain Conveyor Sprocket 9T x 125mm Pitch (Miscellaneous)

Special Type Grease for Pellet Mill and Hammer Mill (Miscellaneous)

List of Spares - PART - B

Elevator Belt Size: 10” (60 Mtr )

Shovel Type Elevator Bucket Size: 8” X 6” X 4” (3 Hole)

Elevator Belt & Bucket Bolt: 5/6 X 1.25”

Mixer Chain With lock (10 Mtr )

Pellet Mill Die- Die Specification: 52-142/186T - TR1 Die Hole Specification: 4.0 X 40 X 50

Pellet Mill Knife Cutter

Front scrapper plate assembly – Gear type

Eccentric Shaft: 52-142/186T-TR1- Gear Type

Press Roller shell

Rear Scrapper

Beater 0604: 210(L) X 47(W) X 6mm (THK), Hole Dia 20mm, Hole to Hole Length-140 mm, Materials – Alloy Steel Hardened

Hammer Mill Sieve Size: 1070 (L) X 565 (W) X 3 MM THK X Hole Dia 3MM

Hammer Mill Rod

Air Cyclone Fiber Glass

Bagging seal Kit, Air Cylinder Model No: A24040125O, A24H040080, A24H040025

Cooler Crumblier Bearing: UCFL 211 NTN

Bearing Adapter Sleeve

Crumbler UHW

Pin for intake chain conveyor

Ishika Engineering Works