Upgradation and Maintenance of road from MRL01-Dal to Waganbatoo via Shukerpoora Stage-U (Batch-I, 2019-20) Package No. JK08-2002, Length 5.70Kms Block Kalaroose, PMGSY Division Kupwara.

Amount

Part A: Pavement-I

Uprooting & removing of Stumps and Roots, with all leads and lift including dispoal,

(a). Girth above 300 mm to 600 mm,

(b). Girth above 600 to 900mm

Clearing and grubbing road land including wild vegetation grass bushes shrubs saplings and trees of girth up to 300 mm removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201 by manual Means in area of non-thorny jungle

Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposal of excavated earth as per technical specification clause 1603.1. (Incl. all leads and lifts, complete job)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Const. of embankments with approved materials obtained from borrow pits with a lift up to 1.5 Mtrs. transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.1 and 300.2, including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Const. of unlined surface drained of average cross- sectional area 0.40 m2 in soil to specified lines, levels and dimensions excavation material to be used in embankment with a lift up to 3m and lead of 50 m (average lead 25 mm) as per technical specification clause 307 ( By mechnically)

Part B: Pvement-II

Excavation for road work soil with hydraulic excavator of 0.9 cum bucket capacity incl. cutting and loading in Tippers as per technical specification as per clause 302.30, for widening portion

Granular sub-base :- Granular sub-base / base / surface course with local nallah/quarry materials (Table 400.13)by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers manually on prepared surface , mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

WBM Grading 3 :- Providing , laying , spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specificatoin Clause 405.(By Manual Means ) including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Prime Coat :- Providing and applying Primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg/sqm as per Technical Specification Clause 502.(Low Porosity) including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Tack Coat :- Providing and applying Tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20-0.25 kg/sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Bituminous Macadam :- Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bitumen binder @ 3.20 % to 3.50 %,of denisity,Viscosity VG grade 10 transported to site laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. By Mechanical Means including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510.specification 1995) By Mechanical Means Type B Bitumen Viscosity VG grade 10 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Construction of Subgrade Earthen shoulder with approved material obtained from Borrow pits with all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with all sorts of leads and lifts as per TS Clause 303.1 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Part C: Protection Works

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious materials and disposal up to a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material ordinary soil incl. dewatering of trenches and diverting of Nallah wherever necessary. complete Job

Providing concrete for plain concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-10 nominal mix 1:3:6 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for plain concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-15 nominal mix 1:2:4 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Back filling behind abutment, wing wall and return wall complete as per drawings and T.S clause 1204.3.8 with 2nd class stones including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Part D: Cross Drainage

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious materials and disposal up to a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material ordinary soil incl. dewatering of trenches and diverting of Nallah wherever necessary. complete Job

Providing, Laying bedding on well compacted sand or approved granular material in foundation trenches. including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for plain concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-10 nominal mix 1:3:6 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-20 nominal mix 1:2:4 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for reinforced concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 RCC grade M-25 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Supplying, fitting and placing TMT Bar reinforcement in foundation complete as per drawing and technical specification clause 1002, 1010 and 1202 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Back filling behind abutment, wing wall and return wall complete as per drawings and T.S clause 1204.3.8 with 2nd class stones / granular material. including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement motor 1:2 but excluding excavation protection works back filling concrete and masonry works in head walls and parapets clause 1106. including Haulage of material involved.(1000mm) including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Stone Masonry Work in cement mortar in foundation of Head walls complete as per drawing and technical specification Clasue 702, 704, 1202 & 1204. including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing PCC M-20 Architectural Coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clause 615 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing and laying of Irrigation crossings, including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

(a). 600mm dia

(b). 450mm dia

Part E: Cement Concrete Drain

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious materials and disposal up to a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material ordinary soil incl. dewatering of trenches and diverting of Nallah wherever necessary. complete Job

Providing, Laying bedding on well compacted sand or approved granular material in foundation trenches.including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for plain concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-10 nominal mix 1:3:6 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specification clause 802, 803, 1202 and 1203 PCC grade M-20 nominal mix 1:2:4 including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Providing and laying cement concrete flooring 50 mm thick in M-20 grade. including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete Job)

Part F: Road Furniture

PMGSY Title Information Board: Providing and fixing typical PMGSY Logo title information board with Logo as per MORD specification and drawing. Three MS plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 m size on back on edge. He lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and plate iron frame of middle plate will be welded to two no. 75 x 75 mm of 12 SWG sheet tuber posts duly embedded in cement concrete M-15 grade blocks of 450 x 450 x 600 mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47 x 47 mm of 12 SWG steel plate tubes. All MS will stove enameled on both sides. Lettering and printing arrows, border etc will be painted ready mixed synthetic enamel paint of superior quality in required shape and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per dawning clause 1701 and annexure 1700.1 including haulage of material involved.

Providing and fixing of citizen information board as per the drawing enclosed and directions of engineer incharge including haulage of material and board complete job.

Providing/ fixing of kilometer stone made up of reinforced cement concrete M15 grade kilometer stone/ local stone of standard design as per IRC:8 fixed in position including painting and printing etc as per drawing and technical specification clause 1703 (Precast), including haulage of material involved.

Providing/ fixing of boundary pillars made up of reinforced cement concrete M15 grade boundary pillar/ local stone of standard design as per IRC:25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704 including haulage of material involved.

Supply and fixing of Logo board at starting point incl. manufacturing as per drawings incl. haulage. Complete job

Providing and fixing of road signage’s including fixing, erecting, haulage etc a per the directions of Engineer incharge complete Job.

Maintenance for Five Years

1st Year

2nd Year

3rd Year

4th Year

5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.

M/s Bhat Infrastructure