Special repair, Rehabilitation and desilting of existing sewerage scheme in Sector-21P MGA Hisar

Amount

21.105 Supplying, erection, testing and commissioning of submersible motor pumping set non clog for sewerage having head 12.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked including all accessories (like SS Pipes, SS Chain (Shackle Chain), SS Foundation Bolt, complete base frame, Monorail, Chain Guide Line, Auto Compiling, Duct Foot Bend (D/F Bend) etc. complete in all respect 21.105.26 Discharge capacity (LPM) 1700 Power capacity (BHP) 7.5

21.105.35 Discharge capacity (LPM) 2600 Power capacity (BHP) 12.5

20.114 Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect 20.114.1 10 HP Motor

20.114.2 15 HP Motor

24.5.1.6 Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 16 sqmm

20.11.2 Providing & fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge. 100 mm i/d

20.10.2 Providing and fixing sluice valves/ flap valves socketed or flanged including nut and bolts marked with IS:1363 rubber sheet marked with IS:638 etc. carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of Engineer-in-charge 100 mm i/d

20.63 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade SandS pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. 20.63.1 100mm i/d

20.93 Providing and fixing 250 mm M.S. clamp as for suitable pipe with nut and bolt complete in all respect as per directions of Engineer-in-charge 24.1 Earthing

24.1.4 Earthing with tinned copper earth plate 600mm x 600mm x 3mmthick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or colke and salt for GI plate or copper plate earth electrode.

N.S. item Lifting chain-Moc : Alloy Steel-W/O GI-Lifting chain with “oval” Ring @ 2m & with D/Bow Shackle 10x2 mtr.

N.S. item Guide Rail without Strip- Moc GI with Coupler ((@ every 3 mtr), 1 Run, (MoC: SS 410))2x4 mtr (guide pipe size 3”)

20.68.1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer 100mm x 900 = 4 Nos. @16 Kg each 64 Kg All Flanged Tee 100x100x100 mm=2 No. @17 Kg each 34 Kg

Sanjeet Kumar Contractor