Construction raising of Boundary wall and shed ic flooring at Bus Stand at Palwal in Palwal Distt. Risk and Cost of Sh. Sakrulla Khan, Contractor Re-Tender

Amount

Civil Works

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6)

Cement concrete 1:8:16 with brick ballast 40 mm nominal size in foundation and plinth. (HSR 10.26)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth. (HSR 10.28)

Cement concrete 1 : 1 ½ : 3 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.42)

Damp proof course 40 mm. thick of cement concrete 1:2:4 using stone aggregate 20 mm. nominal size with 2 coats of bitumen 20/30 penetration at 1.65 Kg. per Sqm. laid hot and sanded. (HSR 10.114 - Note

First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 m. above plinth level. (HSR 11.9)

Plastering on walls 12 mm. thick cement plaster 1:6. (HSR 15.7)

Plastering on walls 15mm cement plaster 1:6 on the rough side of single and half brick wall. (HSR 15.12)

White washing three coats. (HSR 16.48)

Cement pointing 1:2 deep variety on brick and tile work. (HSR 15.60)

Finishing walls with exterior decorative cement based paints such as snowcem Roobbiacem etc. on new work, two coats to give an even shade. (HSR 16.61)

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, grating frames, window guards, iron doors open able or fixed stair case or parapet or any other type or railing, gates and tree guards etc., including cost of screws and welding roads or bolts and nuts complete fixed in position. (HSR 18.12)

Fe-500 EQR TMT steel bars for RCC, works, where not included in the complete rate of RCC including bending, bending and placing in position complete. (HSR- 18.22).

Corrugates asbestos sheet roofing 7 mm thick sheets fixed with G.I hooks and bolts, limpet and bitumen washers complete, fixed in position, excluding the cost of purlins, rafters and trusses (HSR 13.19)

Providing and fixing premoulded bituminous joint filler expansion joints, including the cost of sealing compound and primer coat. (HSR 24.35) (i)

Gulab Singh