PERIODICAL SERVICES TO OTM ACCN UNDER AGE B/R-II NASIRABAD

Amount

M&L for complete removal of existing treatment of old plastered surfaces of wall for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic water based interior grade primer on wall surfaces @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

M & L for two coats of 1st quality acrylic distemper (ready mixed) on wall surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer on wall surfaces @0.9 ltr(undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L for applying Two coats of 100% Premium acrylic emulsion paint on wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. MAKE :- Apex Ultima Protek Asian paints/ Nerolac excel top guard / Berger

M & L for preparation of old decorated plastered or unplastered surfaces of wall including cornices etc and applying one coat of white wash, complete, all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash, complete, all as specified and directed.

M & L for washing, rubbing down, preparing and stopping of old distempered surfaces of wall, removing nails, making good holes, cracks etc and applying one coat of oil bound distemper white or tinted, complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over & including 1mm thick finished coat of white wall care white putty (JK/Birla), complete all as specified and directed.

M & L for washing rubbing down preparing and stopping of old plastered surfaces of wall, removing nails, making good holes, cracks etc and applying one coat of cement base paint, complete all as specified and directed.

M & L for complete removal of existing treatment of wall, removing nails, making good holes, cracks etc and applying Two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and directed.

M & L for preparation of old iron and steel surfaces of any shape and size over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation old treated or untreated concrete surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of primer complete all as specified and directed

M & L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint of approved tint complete all as specified and directed.

Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for Ready mix plaster in cement mortar ( 1:6), 15mm thick on other than fair faces of brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Ready mix plaster in cement mortar (1:4), 15mm thick mixed with water proofing compound,on other than fair faces of brick work or stone surfaces , finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC measured and paid separately)

M & L for Ready mix plaster, 5 mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rough cast plaster over 10mm thick cement plaster in CM 1:4 on stone/ brick masonary wall surfaces complete all as specified and directed.

Supply only liquid water proofing compound (for external plaster surfaces) complete all as specified and directed

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer over & including 1mm thick finished coat of white wall care putty (JK/Birla), complete, all as specified and directed.

M&L for prepartion of new plastered or unplastered surfaces of ceiling and applying two coat of white wash, complete, all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

S & F in repairs Roof tiles, Mangalore pattern, interlocking at side joints, laid dry, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of Manglore tile and applying two coats of terracotta roof paint /Apex wheather coat complete all as specified and directed.

Pawon Kumar Barik (BID ID -3191962)

L P Singh and Co. (BID ID -3200515)

J.K.CONSRUCTION (BID ID -3200788)

TARA CHAND JI GOMA CONSTRUCTIONS CO. (BID ID -3194803)

ANAM BUILDCON (BID ID -3200268)

m/s sai construction company,bijarar (BID ID -3200529)

V K LAKWAL CONSTRUCTION (BID ID -3193228)