Construction of RI office Cum Residence at Katingia under Daringbadi Tahasil in the District of Kandhamal for the year 2024-25

Cost of 125 mm dia PVC pipes :- 00mtr to 30.30 mtr

Earthwork in excavation of foundation in all kinds of soils with all leads and lifts including rough dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc complete in all respect as per specification and as directed by the Engineer - in - charge.

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 25cm (10”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).

Carriage of excavated earth by mechanical means within 5 KM lead etc. complete as directed by the Engineer-in-charge.

Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

Column up to plinth

RCC in Plinth bead

Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550

Foundation

Fly ash brick masonry using Fly ash bricks of size 25cm x 12 cm x 8 cm having crushing strength not less than 75 kg. Per Sqr. Cm. In cement mortar of mix(1:6) with cement and screened and washed sharp sand for mortar after immersing the bricks for 6 (six) hours in water before use in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, conveyance, loading unloading, royalties and taxes of all materials and cost of all labour, sundries, T & P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Brick work in foundation

GROUND FLOOR

Providing, lifting, hoisting and laying reinforced cement concrete of M25 grade design mix using portland slag cement to columns,beams,roof slab,lintels, chajja, shelf, fins, stair case, parapets, window sills, lofts, railings and copings etc with 20mm down graded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars.

Ground Floor Column

Ground Floor Roof Beam Rib

Ground Floor Roof Slab

Ground Floor Chajja, RCC Platforms

Ground Floor Lintel

Ground Floor Staircase

Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification

Masonry work using fly ash bricks of 25cm X 12cm X 8cm size having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc. including roughening chiseling, scraping and cleaning and finishing smooth as per direction of the Engineer-in-charge including cost of all materials, conveyance, taxes and royalties, scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 300mm ) or equivalent make of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge.

Providing Printed series ceramic wall tile of premium grade having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

Providing vitrified tile flooring using Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.

Fabricating and fixing MS Grill for fixing in windows with 10 mm squre bar mesh including cost of all material, cost of welding rod with all labour, conveyance, fixing in position etc complete as per direction of the Engineer-in-charge as per approved specification

Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doors including cost of heavy duty stainless steel hinges, screws , aldrops, tower bolts, handles of approved quality, size and make etc complete as per direction of the Engineer-in-charge as per approved specification

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing in position 50mm, thick precast cement concert' jally [1:2:4] hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete

Supplying and fixing Sal wood Chaukaths of different sizes for doors including cost conveyance royality, taxes T&P materials and all labour etc. required for the work and coaltarring two coats to wood works (wall side surface of chaukaths) including cost of all labour and materials etc complete as per direction of the Engineer-in-charge as per approved specification

32mm WPC Door panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect

Painting with approved quality and shade of enamel paint two coats conforming to IS on steel or wood work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Finishing wall with weather coat paint of approved shade two coats to give an even shade including cost of paints.

Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

Distempering two coats with any approved distemper incl

uding cost of distemper & labour charges.

FIRST FLOOR

Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade design mix using portland slag cement to columns,beams,roof slab,lintels, chajja, shelf, fins, stair case, parapets, window sills, lofts, railings and copings etc with 20mm down graded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars.

First Floor Column

First Floor Roof Beam Rib

First Floor Roof Slab

First Floor Chhaja, RCC Platforms

First Floor Lintel

First Floor Staircase

Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaSFolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification

Masonry work using fly ash bricks of 25cm X 12cm X 8cm size having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaSFolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc. including roughening chiseling, scraping and cleaning and finishing smooth as per direction of the Engineer-in-charge including cost of all materials, conveyance, taxes and royalties, scaSFolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaSFolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 300mm ) or equivalent make of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge.

Providing Printed series ceramic wall tile of premium grade having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

Providing vitrified tile flooring using Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.

Fabricating and fixing MS Grill for fixing in windows with 10 mm squre bar mesh including cost of all material, cost of welding rod with all labour, conveyance, fixing in position etc complete as per direction of the Engineer-in-charge as per approved specification

Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doors including cost of heavy duty stainless steel hinges, screws , aldrops, tower bolts, handles of approved quality, size and make etc complete as per direction of the Engineer-in-charge as per approved specification

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing in position 50mm, thick precast cement concert' jally [1:2:4] hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete

Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaSFolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Supplying and fixing Sal wood Chaukaths of diSFerent sizes for doors including cost conveyance royality, taxes T&P materials and all labour etc. required for the work and coaltarring two coats to wood works (wall side surface of chaukaths) including cost of all labour and materials etc complete as per direction of the Engineer-in-charge as per approved specification

25 mm thick sal wood pannel shutter with 25 mm style & 12 mm thick pannel planks complete with iron fittings and wooden hinged cleats etc. fixed in position excluding cost of fittings etc.

Finishing wall with weather coat paint of approved shade two coats to give an even shade including cost of paints.

Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

Distempering two coats with any approved distemper incl

Painting with approved quality and shade of enamel paint two coats conforming to IS on steel or wood work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaSFoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

FIRST FLOOR

TERRACE FLOOR & HEAD ROOM

Tearrace Floor Column

Tearrace Floor Roof Beam Rib

Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification

Masonry work using fly ash bricks of 25cm X 12cm X 8cm size having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 6mm thick cement plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc. including roughening chiseling, scraping and cleaning and finishing smooth as per direction of the Engineer-in-charge including cost of all materials, conveyance, taxes and royalties, scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Supplying and fixing Sal wood Chaukaths of different sizes for doors including cost conveyance royality, taxes T&P materials and all labour etc. required for the work and coaltarring two coats to wood works (wall side surface of chaukaths) including cost of all labour and materials etc complete as per direction of the Engineer-in-charge as per approved specification

Supplying and fixing Sal wood Chaukaths of diSFerent sizes for doors including cost conveyance royality, taxes T&P materials and all labour etc. required for the work and coaltarring two coats to wood works (wall side surface of chaukaths) including cost of all labour and materials etc complete as per direction of the Engineer-in-charge as per approved specification

Painting with approved quality and shade of enamel paint two coats conforming to IS on steel or wood work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Finishing wall with weather coat paint of approved shade two coats to give an even shade including cost of paints.

Tearrace Floor Roof Slab

Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge

Painting over interior wall plastered surfaces with two coats of distemper paint of approved quality and shade using the required quantity of paint as specified by the manufacturer to give an even shade including providing a coat of Dalmia Magic putty finish on the plastered surface as directed by the Engineer-in-charge including cost of all materials with taxes and transportation, all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor

Approach road

Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.

Providing & filling Sand in foundation & plingth including watering, ramming and cost carriage royalty all labour T & P etc. complete as per the direction of the E.I.C.

Providing Cement Concrete (1:1.5:3) with 20 mm size & down graded h.g. chips including cost, conveyance, royality and all labour charges etc complete as per the direction of the E.I.C

Providing dummy groove expantion joint etc. complete as per the direction of the E.I.C

Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification

Compound Wall

Excavation of foundation in ordinary soil within 50m. initial lead and 1.5m. extra lift over initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying in layer

Filling foundation trenches and plinth with sand, well watered and compacted with appropriate mechanical compactor, top surface dressed and leveled to proper gradient including cost of all materials, labour, sundries, T&P ,all taxes, royalties, loading and unloading etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing and laying plain cement concrete 1:3:6 Nominal grade using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 40mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing, lifting, hoisting and laying reinforced cement concrete of M25 grade design mix using portland slag cement to pile cap, pedestal, plinth beam, etc with 20mm downgraded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member not less than 45mm and finishing the exposed surface smooth, scaffolding, watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars.

Plinth Beam

Above GL

Cvolumn above PB

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushin

g strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Painting with approved quality and shade of enamel paint two coats conforming to IS on steel or wood work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Lowering of 125 mm dia PVC pipes :- 00mtr to 30.00 mtr

-do-………Group B 1.2.2 - 1.24.2

Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)Group A 1.2.1-1.24.2

-do-………. Group C 1.2.3 - 1.24.2

S/F of 9 Watt foot LED light(Crompton/Havels/Bajaj)

Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2

Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB )

S/F of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (1.25.1+1.25.4)

S/F of 15/16A FT power plug and Socket Modular type Accessories(1.27)

S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module(1.24.1)

-do-6 Module

-do-8 Module

-do-12 Module

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)

Supply and fixing of following size MCB box with sheet steel enclosure, distribution board, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland /plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR) . 8 way Double door (2.3.6)

Wiring for twin control light/fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way piano type modular switch with suitable modular base & cover and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /Vguard)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

S/F of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)

S/F of 9W LED Bulb

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 32A DP Modular Switch with neon Indicator & 5 pin 15/16 amp. piano type Modular Socket & Mini DP MCB, connection, painting etc as required for AC

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18)

Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS )

S/F step type modular fan regulator

S/F of 18-25 watt LED Tube light fitting including necessary connection, Make-( Crompton/HPL/Polycab/Havells/PAC)

Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp(Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY

S/F of Fan hook S, Type on ceiling.(M-22)

S/F of computer board consisting of 3 nos. of 5 amp Modular plug and switch complete with wiring on 12M GI box with Front.cover(1.24.9 +1.25.4 + 2.5.1)

S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30)

Drilling of 100mm dia bore :-30.01 mtr to 80.00 mtr

Meters

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr 3.54 m x 2.54 m x 1.50 m =13.487 cum

From 1.5 mtr to 3.0 mtr depth 3.54 m x 2.54 m x 0.70 m =6.294 c

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

In Foundation and Plinth in C:M (1.4)

In Foundation and Plinth in C:M (1.6)

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor

First Floor

Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall

First Floor Wall

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Hindware,Parryware)

Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap(Hindware,Parryware,Cera) to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fixing bowl pattern urinal(Hindware,Parryware,Cera) including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Flat Back lipped wall urinal

Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.C 2 x 0.60m x 0.90m = 1.08 sqm

Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100 mm ) ( Hindware/ Parrayware)with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.Squatting urinal

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes

110mm U-PVC SWR P-trap

110mm U-PVC SWR single junction door

110mm U-PVC SWR door bend

110mm U-PVC SWR Offset

110mm U-PVC SWR plain bend

110mm U-PVC SWR vent cowl

75 mm diameter U-PVC SWR pipes

75mm U-PVC SWR door bend

75 mm U-PVC SWR plain bend

125 mm dia C.P Grating

supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.375 mm thick wall

250 mm thick wall

Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. 160 mm dia PVC Pipe all round

plying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C. 160 mm dia PVC gallary

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90 m dia x 2.00 m deep Soakway pit

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 lits capacity on the roof of F. floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 lits capacity on the roof of F.floor

supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.15mm dia C-PVC pipes

20mm dia C-PVC pipes

25mm dia C-PVC pipes

Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Jaquar make) with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C15 mm x 150mm dia C.P Shower with arm

15 mm dia C.P Health Faucet ( Jaquar Make )

Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar Make) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.15mm dia CP Long body Bib Cock

15mm dia CP Short body Bib Cock

15mm dia CP Two way angle/Bib Cock

15 mm dia CP Angle cock

15mm dia CP Concealed Stop Cock

15mm dia CP Pillar Cock

15mm dia CP nipple

15mm dia CP Flange

25mm dia Metal Full Way Valve

Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware,Cera) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.550mmx400mm W.H.basin

Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Porcelain Pedestal

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.Mirror with plastic moulded frame

Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C20mmx450mm long CP towel rail

CP towel ring

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.CCP soap holder

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 4 x 2.05 x 0.72m=5.90

Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. stainless steel kitchen sink(450x 400x200mm)

Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern(Hindware,Parryware,Cera) with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C 10 lit PVC L/L Cistern

Earthwork in all kinds of so

il in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.

Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C.

Supplying and fitting & fixing of I.S.I make 1.0 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.

Supplying all labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC.

Supplying and fitting & fixing of D.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.

Sinking of 125mmx 100 mm dia T.W

Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 125 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)

Drilling of 125mm dia bore :-00 mtr to 30.00 mtr