Providing additional improvement works to the Wellness Center at North Housing Unit in Ward No 78, South zone

Amount

Dismantling the Damaged Brick Work as per the direction of Engineer-in-charge.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Random rubble masonry in cement mortar 1:5 mix with blue granite rough stones for foundation and basement 10 m3

Supplying and Erecting and centering shuttering for sides and sofits of plain surface such as Rcc slab rectangular , T beam lintel , bed blocks, staircase waist slab , etc. including strutting shuttering , and remaining same etc. complete as per drawing

Reinforced cement concrete M20 1:1.5:3 granite metal by volume, characteristic strength not less than 20N/sqmm) machine mixed for all reinforced cement concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with relevant standard specifications at all leads inside the building.

Supplying, cutting, bending and placing of reinforcement stel of MS, HYSD bars for all type of RCC works at all levels including cost of 18 gauge GI binding wire cost, labour etc., as per design and details complete.

Flyash Brick work in cement mortor 1:5 mix (one cement,five sand) using II class country bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.upto basement

Plastering in cement mortor 1:5 mix (one cement,five sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification TNSS No.61,V,VI,(S4)3.

Painting with first quality emulision paint two coats over a priming coat including through cleaning, scraping removal of dust and including necessary palst of paries putty works whereever required etc,completed

Painting with first quality emulision paint two coats over a priming coat including through cleaning, scraping removal of dust and including necessary palst of paries putty works whereever required etc,completed

Painting with first quality Enamel paint two coats over a priming coat including through cleaning, scraping removal of dust and including necessary palst of paries putty works whereever required etc,completed

Supply and fixing of 4’ 18W Crystal Glass LED Tube Light Fitting Including all cost etc., Complete as per Direction of departmental officer

Supply and fixing of AC ceiling fan 1200MM ( 48" )sweep with 300MM down rod ( without regulator )( crompton make ) (SD 110)

Supply and fixing of 7/9W LED Light Fitting Including all cost etc., Complete as per Direction of departmental officer

Supply and fixing of 25W LED Street Light Fitting with LED Including all cost etc., Complete as per Direction of departmental officer

Supply and fixing of 1.00HP Monoblock Motor Including all cost etc., Complete as per Direction of departmental officer

Supplying and fixing 110mm dia PVC rain water down fall pipe including cost of pipe, shoe, bond, brackets, teakwood plugs, etc., complete - 1

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supplying grill windows & Ventilators including cost of steel and labour charges for welding etc., complete

Roofing with plain GI sheet 0.80mm thick (22 gauge) with necessary bolts nuts and washers etc., completed with ridges - 1m2

SS Chair Including Transportation etc.,

Plumbing works and labour charges

Artist charges for Name Board & Stickers

Add :- GST @ 18%

GAssociates (BID ID -1499480)