Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹10.0 L+₹18,612 (1.90%)Rejected-Finance NO 1 RANGAJAN VILLAGE PO BOKULONI CHARIALI MAUZA TIPLING SUB DIVISION TENGAKHAT DIST DIBRUGARH ASSAM 786191 | DIBRUGARH | ASSAM | 786191 | L2 | Rejected-Finance Due to higher rates. | |
| 3 | L3₹10.8 L+₹1.0 L (10.6%)Rejected-Finance KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L3 | Rejected-Finance Due to higher rates. | |
| 4 | L4₹10.9 L+₹1.1 L (11.6%)Rejected-Finance JUNAKI NAGAR WARD NO 08 PO SILAPATIHAR DIST DIEMAJI ASSAM | L4 | Rejected-Finance Due to higher rates. | |
| 5 | L5₹11.0 L+₹1.2 L (12.2%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L5 | Rejected-Finance Due to higher rates. |
Tender Value
₹9.8 L
EMD Value
₹19,600
Closing Date
12 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF FOOTPATH WITH INTERLOCKING TILES AND LT VEH PARKING SHED AT TEZU MIL STN UNDER GE LEKHAPANI
2022_MES_543244_3
8677/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹19,600
Yes
30 Nov 2022
22 Oct 2022
17 Nov 2022
22 Oct 2022
12 Nov 2022
29 Oct 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft /loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and with and including rolled with power rolled of 8 to 10 tonne capacity to a true surface.
Rolling and consolidating formation surfaces using 8 to 10 tonnes power rolled to required camber and gradient complete all as specified and as directed.
M&L PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in foundations,filling and mass concrete complete all as specified and as directed.
M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation,complete all as specified and as directed.
M&L Providing PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including use of formwork complete all as specified and directed
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
All as per Item No 11 above but with grey cement and pigments.
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Factory made chamfered edge cement concrete paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Providing RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundations, raft footings, stub columns etc and similar articles,complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directd.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per Item No.18 above, but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-310 complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A, complete all as specified and directed.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, long but length of bolt exc 5 cm but n exc 10 cm long complete all as specified and as directed.
M&L for Pre-paintd hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor completed all as specified and as directed.
M&L for Pre-paintd hot dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as in eaves roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor completed all as specified and as directed.
M&L 75 mm thick, PCC ( 1:3:6) type C-1, (using 20 mm graded stone aggregate) as in plinth protection/pavings/shafts laying in 1:20 slope including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot brown bitumen 85/25 and two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and directed.
M & L Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M/S SINGH TRADERS
M/s NARAYAN MUKHERJEE & CO
SAHASRA CONSTRUCTION
ADNEEDS ENTERPRISE
JANATA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .