Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹4.0 L+₹42,240 (12.0%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹5.0 L
EMD Value
₹10,040
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE(I) CIF (R) C/O 56 APO
REPAIR/MAINTENANCE OF PUMPS MOTOR AND EXTERNAL WATER SUPPLY AT VARIOUS LOC OF HQ CIF (R), HQ 6 and 13 SECT RR UNDER AGE (I) CIF (R).
2022_MES_570962_1
AGE(I)/R-27/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF(R)
Class E and above and category a (ii)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹10,040
Yes
11 Feb 2023
23 Dec 2022
2 Feb 2023
23 Dec 2022
28 Jan 2023
7 Jan 2023
Amount
Excavation in trenches in hard/dense soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.
Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .
Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified.
M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 70 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 120 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. Note:-(Earth work, brick protection and sand cushioning shall be measured and paid for separately).
Aluminium cable thimble of size120 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .
Aluminium cable thimble of size 95 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .
Aluminium cable thimble of size 50 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed.
Aluminium cable thimble of size 35 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed.
Aluminium cable thimble of size 25 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed.
Supply and fixing in replacement MCCB 250 Amps, four pole, 415 volt,50 Hz with breaking capacity 36 KA with adjustable thermal and fixed magnetic, complete all as specified and directed.
Supply and fixing in replacement MCCB 200 Amps, four pole, 415 volt,50 Hz with breaking capacity 36 KA with adjustable thermal and fixed magnetic, complete all as specified and directed.
Supply and fixing in replacement MCCB 160 Amps, four pole, 415 volt,50 Hz with breaking capacity 36 KA with adjustable thermal and fixed magnetic, complete all as specified and directed.
Supply and fixing in replacement MCCB 100 Amps, four pole, 415 volt,50 Hz with breaking capacity 16 KA with adjustable thermal and fixed magnetic, complete all as specified and directed.
Disconnecting the input and output electric supply from automatic voltage stabiliser of 200 KVA capacity and taking out from Palma and shifting to civil workshop Rajouri (about 20 KMs away from Palma) for carrying out repair works. Note:- The rate quoted by the contractor shall incude the rate for T&P, transportation and necessary men power required during loading and unloading.
Supply and fix in replacement PCB with holder complete all as specified and directed.
Supply and fixing in replacement trigger transformer complete all as specified and directed.
Supply and fixing in replacement panel lamps alongwith connecting leads for over voltage under voltage etc.complete all as specified and directed.
Supply and fix in replacement corbon brush complete all as specified and directed.
Supply and fix in replacement digital volt meter 72 x 72 mm complete all as specified and directed.
supply and fixing in replacement servo motor 10 KG torque complete all as specified and directed.
Supply and fixing in replacement RC network for 10 KG servo motor complete all as specified and directed.
Supply and fix in replacement auto manual switch complete all as specified and directed.
Servicing the Reverse Osmosis Plant of output capacity 25 Litre per hour+UV water purification with ultraviolet disinfection with Arsenic, floride and chloride removal having 3 candles with micron filter/pre filter having particulate filter porosity 10 micro with pressure vessel dual media filter electrically operated semi automatic with external cut off operating voltage 230 Volts 50 Hz AC Supply including High Pressure pump , raw water/ chemical cleaning Pump and testing complete all as specified and directed by Engr In Charge.
Taking out submersible pump and motor of capacity 2 HP from the tube well lowered at the depth of 90 to 110 mtr from the ground level including taking out HDPE pipes of complete length and one Nos submersible cable 2 core of any size incl disconnecting electrically and delivery out let pipe and lowering after complete repair and maint of the same complete as in order to start the submersible pump complete all as directed by Engr-in-charge
Rewinding submersible motor 2 HP of 01 Phase, 240 volts with PVC insulated solid copper conductor (wire) superior quality of approved make, size & number of wire as per existing complete including replacement of worn out cable connections, spare parts including testing and commissioning of motor after rewinding complete all as specified. Note:- Spare parts shall be measured and paid separately under respactive items
Supply only the following spare parts for submersible motor as per existing make and size :-
GM Bearing Bush
Rotor sleeve
Water seal
Thrust bearing
Housing upper
Housing lower
Cable seal
Thrust plate
Coupling S/S
Key for coupling
LNK bolt S/S
Revolving disc
Seal bush
Sand guard
Opening and reassembling of submersible pump of capacity 2 HP and replacement of the worn out spare parts as mentioned under respective item no 35 here in after. Note:- Spare parts shall be measured and paid separately under respactive items
Supply only the following spare parts for submersible pump as per existing make and size :- Make of pump
Stage bowl
Impellers
Pump shaft S/S (single stage)
Hook bolt (Upper & lower)
GM neck ring
Key for pump shaft (Each stage)
Distance sleeve
D.O.L Bush
Sand guard
Impeller key
Inter ring
Guide bush
Suction chamber
D.O.L. Sleeve
Dismantling of existing defective induction motor of the size 5 HP capacity any make from the foundation, disconnecting the electric connection, coupling pulley, and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor ( winding wire) complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and as directed by Engineer-in-Charge.
Dismantling of existing defective induction motor of the size 20 HP capacity any make from the foundation, disconnecting the electric connection, coupling pulley, and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor ( winding wire) complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and as directed by Engineer-in-Charge.
Supply & Fix in replacement starter (DOL) for 2 HP submersible pump starting & running capacitors complete all as specified and directed by Engr-in-Charge.
Supply & Fix in replacement three phase automatic star delta starter for 20 HP pump set starting & running complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of submersible pump motor set 2 HP single phase capacity 20 Ltrs at 564 feet (Silver colur) complete all as specified and directed by Engr-in-Charge.
Taking up or down GI tubing including connections carefully, for relaying or removal to store all as directed and specified by Engr - in - Charge of following size. Note- Excavation and earth work shall measured and paid saperately under relative item.
25 mm dia bore
40 mm dia bore
50 mm dia bore
S&F 25 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etc) laid in trenches, complete all as specified and directed by Engr-in-Charge.
S&F 40 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etc) laid in trenches, complete all as specified and directed by Engr-in-Charge.
S&F 50 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etc) laid in trenches, complete all as specified and directed by Engr-in-Charge.
S&F 80 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etc) laid in trenches, complete all as specified and directed by Engr-in-Charge.
S & F in replacement of cast iron sluice valve 80 mm dia both side flanged PN-1.6 confirming to IS 14846 (ISI marked) with stainless steel spindle and iron wheel non raising type including, nuts and bolts, complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair gun metal gate valve 20 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.
Supply and fix in repair gun metal gate valve 25 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.
M&L dewatering, cleaning of reservoirs with high pressure jet incl lime wash internally complete incl Writing of the date of cleaning of the water tank all as directed as under for the following. (i) Dewatering the tank with portable submersible pump set. (ii) Removal of left over dirty water and sludge with special sludge removal pump set . (iii) Cleaning of wall ceiling and floor by high pressure rotary water jet . (iv) Removing of remaining sludge from the floor with the help of industrial vacuum cleaner. (v) Spraying of non toxic biodegraded eco friendly anti bacterial agent certified by a Govt approved lab to disinfect the tank from harmful bacteria. (vi) Epoxy Paint two coats on external and internal surfaces after removing/ scraping old distemper complete
70,000 Ltrs capacity U/G sump at Main Pump House
35,000 Ltrs capacity U/G sump at Gate No 01
10,000 to 15,000 Ltrs capacity U/G sump at Gate No 01
Supply, fabricating and installing of perforated M.S. cable trays of size 50 x 200 x 2 mm thick including horizontal and vertical bends, reducers, tees, cross members and other accessories as required, and duly suspended from the ceiling with M.S. suspenders, including painting, complete all as specified and directed by Engr-in-Charge.
M&L of sub main wiring with four run of single core PVC insulated FRLSH stranded copper conductor cable of size 10 Sq mm and two run of 10 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping with necessary accessories complete all as directed. Note : 4 Runs of 10 sqmm cable and two run of 10.00 sqmm earth wire with PVC casing and caping shall be measured as one length.
Supplying & laying in trencies 40mm outside dia CPVC pipes shedule -80, IS 4985 for potable water includin all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc.), complete all as specified and directed by Engr-in-Charge.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 33,057.00 during AOC Note:- Tenderers shall not quote for this Schedule
M/S PARSHOTAM KUMAR GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .