AR and MO IEI Residential Building at Chakkargaon under Sub Division I EandM Division APWD Prothrapur during 2022-23 SW Providing IEI and EEI ic Installation of AC and Inverter to Qtr No. NG 01 Type V at Chakkargaon

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required a) Group-B

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch

b) 2 way 5/6 A switch

c) 15/16 A switch

d) 3 pin 5/6 A socket outlet

e) 6 pin 15/16 A socket outlet

f) Telephone socket outlet

g) TV antenna socket outlet

h) Bell push

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. a) 1 or 2 Module (75mmX75mm)

b) 3 Module (100mmX75mm)

c) 4 Module (125mmX75mm)

d) 8 Module (125mmX125mm)

e) 12 Module (200mmX150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required

Supplying of Surface mounted durable LED batten fitting similar to C&S Cat no-CRUX/1x20W, with 20 watt LED lamp ordering Code LTIC00120WLED/WD or its equivalent etc., as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying installation testing and commissioning of AC.Ceiling Fan 1200mm Sweep (Colour: Opal White, Brown ) similar to Havells ES NEO 5 Star & ISI without regulator or its equivalent including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Ventilating Fans of 250mm sweep (plastic type) similar to Havells MODEL :Ventil Air-DX White or its equivalent to ISI standard.

Supplying of Heavy Duty Exhaust Fans of 300mm sweep, 900 rpm Turbo Force SP, similar to Havells or its equivalent to ISI standard.

Supplying and fixing of Wall fan 450 mm sweep Havells V3 or its equivalent etc., as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying of LED Mirror light fitting 9 watt similar to Havells cat no. LHEXBLP7IN1W009 or its equivalent, etc., as required.

Supplying of 10 Watt LED Lamp in the existing Batten Holder similar to Havells Cat No. LHLDDDEAIA5R010 10W/ B22 or its equivalent, etc., as required.

Supplying and fixing of Instant type electric water heater 3 Ltr capacity 5 star 4.5 kw similar to Havells Cat no. GHWAIBPWB003 or its equivalent, etc., as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

SITC of 2.0 Ton 4/5 Star (As per 2018 BEE Star Rating) Inverter High Wall Split Type Air Conditioner (Rotary Compressor 1 Phase 220 Volt) Make: HITACHI KASHIKOI 5100X Model RMOS524HCEA or its equivalent (with copper condenser coil) i/c providing standard length of refrigerant copper pipe kit, cutting, drilling holes on the wall, cementing, Painting to give an even look and smooth finishing, wrapping PVC non adhesive white tape over insulation of gas pipe etc. as required and as per the direction of Engineer-In-Charge.

SITC of 1.5 Ton 4/5 Star (As per 2018 BEE Star Rating) Inverter High Wall Split Type Air Conditioner (Rotary Compressor 1 Phase 220 Volt) Make: HITACHI KASHIKOI 5100X Model RSOS518HCEA or its equivalent (with copper condenser coil) i/c providing standard length of refrigerant copper pipe kit, cutting, drilling holes on the wall, cementing, Painting to give an even look and smooth finishing, wrapping PVC non adhesive white tape over insulation of gas pipe etc. as required and as per the direction of Engineer-In-Charge.

Supplying and fixing of 5KVA Voltage stabilizer suitable for 2 ton Air Conditioner as required of Make: V-Guard Model VG 500(Voltage Range 170V-270V, 15Amps) or its equivalent etc., as required.

Supplying and fixing of 4KVA Voltage stabilizer suitable for 1.5 ton Air Conditioner as required of Make: V-Guard Model VG 400(Voltage Range 170V-270V, 12Amps) or its equivalent etc., as required.

Providing and Fixing of Prefabricated stand for keeping outdoor units of 1 Ton / 1.5 Ton / 2 Ton Capacity Split Type AC or its equivalent etc., as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying, installation, testing and commissioning of 1.0 Hp single phase 0.75 kw electric motor with mono block centrifugal pump similar to Havells cat no.MHPASS1X00 or its equivalent, etc., as required.

Supplying, installation, testing and commissioning of sine wave inverter CRUZE-2KVA, 24 Volt having capacity of 1680 W output along with 2 Nos. 12V, 180 AH Tall Tubular Battery for backup similar to Luminous Inverter and Battery or its equivalent, etc., as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Double Pole

Supplying and Laying of size of XLPE insulated heavy duty armoured aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 (Part-I) 1988 as applicable Make: CCI/GLOSTER/ HAVELLS/POLYCAB/FINOLEX in the existing RCC / Hume/ Metal pipe as required a) 10 Sq.mm x 2 Core

Supplying of Laying of One Number Double Walled corrugated high density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 16205 (Part 24-2018) complete with necessary HDPE filling for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation and refilling the trench etc., as required. a) 50 mm outer dia & 38 inner dia nominal size

Supplying and Fixing of 12W LED Bollard Fitting similar to INVENTAA Cat No. EBERTA 5" SQUARE 12C/Y - 2802 12W or its equivalent, etc., as required.

Supplying of 10W LED Lamp in the existing LED Bollard Fitting similar to Havells Cat No. LHLDDDHBIA5R010 10W/E27 or its equivalent, etc., as required.

Providing and making pedestal / base of size 20cm x 20cm x 60cm (LxBxH) with cement concrete of grade 1:2:4 (1 Cement: 2 Coarse sand : 4 stone aggregate 20mm) 30 cm below and 30 cm above the GL for installation of Garden Light including centering, shuttering and earth work complete or its equivalent, etc., as required.

M/s G K Construction