PROVN OF WC AND BATHROOM FOR OR NEAR BUILDING NO. T1 and T2 , PROVN OF CAR PARKING SHADE WITH HARD STANDING FOR 05 X CARS RWA ALC FAMILY QUARTERS, PROVN OF HARD STANDING WITH DRYING WIRE AT DHOBI GHAT AT ALC, PROVN OF 70XGEYSERS EME BN AT 4 RMC, PROV

Amount

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick square / rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed

M&L for Glazed ceramic tiles as on vertical surface of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing coat in CM 1:4 with and including triangular filleting in CM 1:4 on top edges complete all as specified & directed

S&F PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed

M&L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below including screed bed and cleaning the surface of slab with wire brushes removing dust foreign material including flushing at junction of wall and removing the rubbish off the premises to a distance exc. 500 m complete all as specified and directed by Engr-in-Charge:- (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc; by wire brush & brooming with broom, sweeping free from dust etc; and evenly applying a coat of approved bituminous primer @0.70 Kg / Sqm of area complete all as specified. (c) M&L for Laying APP polymer modified approved membrane, non woven, pollster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method and carrying out test by flooding water for 24 hrs for leakage & seepage and rectifying the same if any leakage / sea page observed to the entire satisfaction of Engr-in-charge. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr-in-Charge.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

Cutting holes into or through brick / stone / PCC block wall built in cement mortar, superficial area exc. 500 Sq. cm but n. exc. 0.10 Sqm and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-B, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), including removing the demolished materials out side the defence land, complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar, including removing the demolished materials out side the defence land, complete all as specified and directed.

S&F stainless steel, chromium plated towel ring round with round flange etc complete all as specified and directed.

S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard & railing 60cm long, complete all as specified and directed

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F Health faucet stainless steel chromium plated with CP 1.00 m flexible tube & wall hook with N.R.V. (back flow prevented) complete all as specified & directed

S&F toilet paper holder, stainless steel, chromium plated, fancy type, complete all as specified and directed.

S & F 15 mm bore stop valve, chromium plated, fancy type, cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F 15 mm bore angle valve, chromium plated, fancy type, cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc complete all as specified and directed.

M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc complete all as specified and directed.

M&L for cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall etc complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall etc complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed.

S&F brass chromium plated shower rose, 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed.

S&F in repairs PVC (SWR), 75mm dia outlet multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and directed.

S&F 15 mm bore PVC connection 600 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F 40mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches, complete all as specified and directed.

S&F PVC (SWR) gully trap 125x110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR), 110mm bore junction with access door, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F PVC (SWR), 75mm bore junction with access door, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F PVC (SWR) vent cowl 110mm bore, complete all as specified & directed.

S&F vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F vitreous china wash basin flat back size 580 mm x 450 mm fixed on and including CI bracket including fixing tap, porcelain stopper and S&F 32mm dia brass CP waste coupling and 32mm dia PVC waste pipe with and including 15mm bore CP fancy type pillar tap, swan neck long body complete all as specified and as directed.

M&L for cutting existing steel tubing for alterations or additions of 40 or 50 mm dia (Each cut measured) complete all as directed by engineer in charge

M&L for screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector 40/50 mm bore of pipe complete all as directed by engineer in charge.

M&L for 25 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for precast heavy duty premium quality colored parking designed floor tiles 60cm x60cm, 15 to 16 mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments as in floors laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

S&F plain mild steel wire, galvanised, dia of wire 3.15mm as in fencing including straining and fixing to wood, concrete or steel post and / or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staple or steel, pins etc etc. as directed (each line wire to be measured), complete all as specified and directed

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100 mm long stainless steel butt hinge, medium weight complete all as specified and directed.

Removing of old existing water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc. 500m complete all as specified directed by Engr-in-Charge

S&F 250mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

Surface excavation in any type soil n.exc. 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

M&L for supply of moorum / red bajri filling as in floors or pavings, laid in layers n. exc 15cm thick, spread, leveled and rammed including watering, complete all as specified and directed

M&L for hardcore of broken granite or trap stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for providing PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in coping, edging, filleting, kerb, bed plate including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for RCC M25 design mix, using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC M25 design mix, using 20 mm graded crushed stone aggregate as in beam, cantilevers, lintel or chajja etc complete all as specified and directed.

M&L for RCC M25 design mix, using 20 mm graded crushed stone aggregate as in columns, piers, pillar & struts etc complete all as specified and directed.

M&L for RCC M25 design mix, using 20 mm graded crushed stone aggregate as in slab / roof slabs/ shelves etc complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, rubber moulded/ glossy finish, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 80mm thick compacted bed of crushed sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, rubber moulded/ glossy finish, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for forming construction joints 30mm deep x 10mm wide, filled with 'A' grade sealing compound, complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with 'A' grade sealing compound, complete all as specified and directed.

M&L for forming construction joints 30mm deep x 10mm wide, filled with 'A' grade sealing compound, complete all as specified and directed.

M&L for rolled mild steel as in joist, channel, angle, or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde-E-250) Quality-B, complete all as specified and directed.

M&L for steel work in tubular frame work (Truss) as in posts, cross beam, rafters & purlins and other connected members etc including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St 240 of medium duty complete all as specified & directed

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed

S&F Pre- painted galvalume aluminum zinc coating GI based manglore type pattern or pattern as directed steel sheet 0.50mm thick with curved facia on both side or one side of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and directed

M&L for use and waste of form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for use and waste of form work to side of pillars, post, struts & columns etc fair finished surface of concrete, complete all as specified and directed.

M&L for use and waste of form work to soffit and sides of floor / roof beams, shelves & lintel, fair finished surface of concrete, complete all as specified and directed.

M&L for use and waste of form work to soffits of suspanded flat slab such as roof slabs, floor slabs, landing, shelves and similar work (horizontal or sloping), complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exc. 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

S & F 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F 20mm bore gun metal gate valves (Class I), with iron wheel head, screwed both ends for iron pipe, ISI marked, all as specified and directed

M&L for rendering 15 mm thick on internal fair faces of brick or concrete work in cement mortar 1:4 with finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick on other than fair faces of brick or concrete work in cement mortar 1:4 with finished even and smooth without using extra cement complete all as specified and directed

M&L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed

M&L for applying two coats cement base paint (snowcem) over a coat of primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for three coats white wash on new plastered surfaces of ceiling including preparation of new surfaces, complete as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth surfaces complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick /concrete surfaces finished even & smooth without using extra cement, mixed with integral water proofing compound as per manufacturer’s instructions complete all as specified & directed. Note :- WPC shall be measured & paid separately under respective item

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 as in cover slab, chajja, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete all as specified & directed.

M&L TMT bars, 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

S&F aluminium powder coated ventilators / louvers 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated of following sections conforming to catalogue of “JINDAL” or of equivalent make as mentioned here-in-after including with rubber beading etc complete all as specified & directed:- (a) SP - 20048 (b) Glazing clips 19352

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of suitable size and 20 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested, 150mm bore of pipe, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) in copings, platform of water tanks and haunching inside manhole and the like including weathering, slightly rounded or chamfered angles, throating (If required) including with necessary form work etc complete all as specified and as directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cable, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard/ dense soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and exc. 1.5 m but n. exc. 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard/ dense soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed

Removing excavated material exc. 50m but n. exc. 250 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Removing excavated material exc. 250m but n. exc. 500 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Removing excavated material exc. 1.5 Km but n. exc. 5 Km and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor to match with existing surface etc complete all as specified and directed

M&L for wiring with 1.5 Sqmm single core FRLS grade PVC insulated unsheathed, 1100V grade IS-694 marked, with multi-stranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall / ceiling etc including pressed steel terminal box with 3 mm thick plastic laminated sheet top covers for one light / fans / exhaust fan point controlled by one number one way 5A switch, complete all as specified and directed.

S & F switch piano flush button type 6 Amp single pole one way complete all as specified and as directed.

S&F ceiling rose polycarbonate isolated body 2/3 terminals complete all as specified and as directed.

S&F LED integrated battenT-5 Nakshatra series tube light fitting pre-wired with high efficacy electronic driver, glare free smooth light distribution including LED tube 1x18/20 Watts connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as specified and directed

S&F mirror light fittings 10 watt, die cast aluminium housing with complete assembly & PC opal diffuser suitable for indoor and outdoor applications with IP54 protection, complete all as specified and directed

S & F Lamp holder, PVC / Urea type with back plate suitable for batten fittings complete all as specified as directed

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth wire protected by galvanised iron 15 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings etc. complete all as specified and as directed. Note :- (i) Unit rates includes the cost of 7.50 m GI pipe for protection of 4mm dia GI earth wire for each earthing.

S&F integral LED security light 35 watts comprising of epoxy powder coated aluminium housing, enclosed with cover in frame suitable for 50/40 mm Gl pipe including Gl pipe light grade & fittings etc complete as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS with stranded copper conductor of size with 4 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS with flexible wiring cable confirming to IS: 694-1990 with and including continuous earth wire of size 1x2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-metallic PVC non-metallic rigid heavy duty concealed PVC conduit of suitable size of white/ ivory colour and its accessories ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall and making good the disturbed surfaces walls by applying two coats of white / colour washing / distempering etc. to match the existing complete all as specified & directed. Note:-One meter length of PVC conduit, 2 runs of 4 sqmm and 1 run of 2.5 Sqmm stranded copper conductor cable shall be measured as one unit length.

Supply and fixing exhaust fan, metal frame with louvers AC single phase 230 volt of 250 mm sweep including making hole of suitable size in walls and connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to exhaust fan complete all as specified and as directed.

Supplying, laying and testing of 10 Sqmm, 2 core XLPE cable, insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric cable, 1100 volt grade, heavy duty, ISI marked with aluminium stranded conductor, complete all as specified and directed

Supplying, fixing and testing of electric water heater (Geyser) of 25 litres capacity, storage type, shock proof with glass line inner tank (rust proof) having heating element up to 3 KW capacity, BEE 5 star rated complete with all accessories & fittings such as safety valve, thermostat, NRV, 16 Amps shock safety plug connected with 3 core cable of suitable size/ length, hot and cold water pipe connections not less than 450mm in length or as recommended by manufacturer including 4 Nos. of hold fastener nuts of suitable size fixed in brick / stone wall complete all as specified and as directed. Note:- Minimum 07 years warranty on inner tank and 4 years warranty on heating element shall be provided by manufacturer from date of purchase. The contractor should obtain warranty / guarantee from the manufacturer & submitted same to the Engr-in-charge.

S&F 15mm bore galvanized iron water tubing medium grade fixed to in walls / floors / roofs etc, including cutting to wall and making good the disturbed surface and making connections from existing pipe line including provision of all necessary GI fittings, fixtures & accessories, complete all as specified and directed.

S&F switch socket combination 5 in 1, 3 pin, 6/16 Amps flush type universal, complete all as specified and directed

S & F sheet metal enclosure double door, SPN, suitable for distribution boards when MCB to be used having 200 Amp rated bus bar 4 ways 240 V with and including grouted the same in wall with PCC 1:2:4 type B-0, complete all as specified and as directed.

S&F modular metal flush box 3 module, complete all as specified and directed

Taking up and down steel tubing 40/50 mm including with connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Re-fixing old serviceable steel tubing obtained from item no. 123 with and including necessary fittings and fixtures in new or old positions as on walls, ceiling, floors etc, complete all as specified and directed

Supply and fixing of MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA C series complete all as specified and directed

Supply and laying of PCC cable covers of size 250mm x 150mm x 40mm best quality laid dry in trenches for protection of underground cable complete all as specified and directed

Supplying, installation, testing and commissioning of reciprocating air compressor of capacity 30.1 CFM, working pressure 12 Bar, two stage, three cylinder 10 HP complete with air receiver 500Litre & direct on line starter connected and mounted on PCC foundation of suitable size in 1:2:4 type B-1 (Using 20mm graded stone aggregate including AVM pads as per recommendations of manufacturer and connecting to existing air pressure line complete all as directed by Engr-in-charge. Model: TL10LB-12TM 500L 415V of Make “ELGI” or equivalent make as approved in the light of technical specification as well as price criteria of “ELGI” make

M&L for sand cushioning with dry river sand as in trenches suitable for cushioning of underground cable line including spreading, leveling, well rammed etc complete all as specified and directed

M/s.BAJRANG CONSTRUCTION (BID ID -3145901)

Gauri Associates (BID ID -3138825)

AJINKYA VIKRAM GAIKWAD (BID ID -3145727)

UNIQUE ENGINEERS (BID ID -3137840)

ASMEE ENGINEERING SERVICES (BID ID -3145626)

ANIL CONSTRUCTION CO. (BID ID -3138317)