81431 REPAIRS RESURFACING TO PERIMETER ROADS AT INS KATTABOMMAN AND REPAIRS RESURFACING TO ROAD AT RS(P) AND SESS PALYAMKOTTAI UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A'

Repairs to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud or water scoring sunken surface in roads path etc, cutting around edges at least 25mm in depth making good by filling in screened & graded road metal, watering and well ramming complete (incl supply of road metal) complete all as specified and directed.

M&L for preparing of existing black top surfaces of road by brushing with wire brushes for removing cakeds mud etc, sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 3.00 Kg/10 Sqm using cationic emulsion RS1 grade over black top surfaces complete all as specified and as directed.

Material and labour for Bituminous premix semi dense asphaltic concrete (SDAC), 30 mm consolidated thickness with 5.5 % binder content of paving bitumen by weight of total mix using VG-30 grade bitumen, rolled and compacted to required camber and gradient complete using mechanical paver and rolled using power roller 8 to 12 tonne capacity complete all as specified and directed. Note: The contractor's quoted rates shall also be deemed to include the following element:- (i) In case of variation in the binder content as per approved design mix in comparison with the binder content as specified above, the variation in qty of binder content on lesser side shall be adjusted through supply only rate of Bitumen VG-30. However, variation on the upper side shall be carried out by the contractor without any price adjustment.

Surfaces dressing not exc 15cm deep as soft/loose soil in berms including removal all as specified and as directed.

M&L for 75mm thick (spread thickness) moorum/red bajari filling in road spread rolled and consolidated to gradiant and camber as required complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium, tape of 25 mm wide strips with anti theft steeel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacutures instructions complete all as specified and directed.

Supply and fixing two side reflective cats eye with ABS material, body of size 100 mm x 100 mm, with honeycomb patterned base, twin molded shanks and two way retro reflective lenses, installed in asphaltic surface by drilling holes 30mm upto a depth of 60mm and bedded with suitable adhesives of epoxy mortar on roads and fixed with suitable dia bolt in drilled hole, complete all as specified and directed. (Make: Series 290C/ 290CE OF 3M or equivalent equivalent as mentioned in PS approved by GE)

Demolition of cement concrete in ground floor/paving not exceeding 15cm thick below or above GL unreinforced including removal of debris to a distance exe 50m & not exc. 250m and deposite complete all as specified and directed

Material and Labour plain cement concrete type C2, 1:3:6 100mm thick (using 40mm graded stone aggregate) in footpath/ hardstanding finished even and rough to receive top layer complete all as specified and as directed

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and as directed

AnnaiEnterprises (BID ID -3276325)

J L CONSTRUCTIONS (BID ID -3278019)

Kanns Project Management And Consultancy (BID ID -3276462)