Maintenance of Water Supply System Supply Testing and Demonstration of safety equipments for Chlorination System at Gogal MBR

Supply, Testing and demonstration of Air breathing apparatus ( C.S. Cylinder) , make Dragger, with self timing duration of 45 min., 300bar, complete with Air Cylinder, Facepiece, Harness & Backpack, Regulator , Demand Valve , Alarms , store box , etc.

Supply and demonstration of Full Covered gas mask ( Canister ) covering eye, nose and mouth ( upto 5000ppm ) make Venus , with single replaceable filter including 1 set of filter suitable for 5000 ppm gas mask.

Supply and demonstration of Half Covered gas mask ( Canister ) covering nose and mouth ( upto 1000ppm ) make Venus , with dual replaceable filter including 1 set of filter suitable for 1000 ppm gas mask.

Supply , Installation , Testing and Commissioning of Chlorine leak detection Sensor, IP 66 , model : GT-1033-FLP in Ambetronics or equivalent, complete with indicator & hooter, wall mounting type complete with Canopy & Mounting Stand. The detailed technical Specifications are as under: Power Supply input : 24 VDC , Output : 4-20mA Loop current output with configurable range, Sensor : Electrochemical Sensor/ NDIR, Range/Resolution : 10 PPM/0.1, Detection method : Diffusion, Response Time: Less than 10 sec, Display : 3 Color LCD backlit RED, GREEN, BLUE, Set Point: Two independent set point with alarm symbol, Settings : by using magnetic wand.

Supply and Demonstration of Emergency Safety kit for 900kg Capacity liquid chlorine tonner consisting of M.S. Tie rods-2nos, M.S. Washers for Tie rods-8 nos, M.S. Channels for tie rods-2 nos, M.S. Handle for valve side channel valve protection hood- 1 no, ALSI Chlorine Valve for Hood-1 no, Chlorine Valve operating key with M.S. handle + SS die- 2 nos., 30-32 de fix spanner-1 no, SS Clamp for connecting copper tube with Valve-1 no, 1/2" -5/8" de fix spanner- 1no, Teflon washers for copper tube nuts-10 nos, M.S. Hammer-1 no., Screw driver- 1 no, M.S. patch plate for attending leakages in body- 1 no, EPDM packing for body patch plate- 1 no, M.S. link chain for patch plate ( 9 meter)- 1 no, M.S. stud with handle for patch plate -1 no, Copper tube assembly for Chlorine Valve- 1 no, M.S. box -1 no, EPDM gasket for Valve hood- 3 nos.

Supply of safety showers make Udyogi or equivalent, complete with eye wash, 1/2" inlet & 1 1/2" outlet connection and with flow capacity of 10 LPM. The Safety shower have emergency eye/face wash with dual aerated spray heads to provide user a soft confortable spray to rinse eyes / face for the full minimum time of 15 minutes. The Spray heads shall have flip top cover to protect it from contamination. The safety shower shall have lifesaver shower head with self draining system and highly visible yellow pull-rod to locate unit during an emergency with corrosion- resistant steel bowl.

Supply of Personal Protective Equipment kit for chlorine Breathing Apparatus set of make Draggor, complete with Chlorine gas suit (Apron + Pant ), Heavy duty chemical-resistant Hand gloves, gum boot, Safety Helmet & Goggles or Face Shield etc.

Supply of Chlorine tonner lifting beam suitable for 900 kg. capacity liquid chlorine cylinder complete with all other required accessories.

Supply of Trunnions for 900 kg. capacity liquid chlorine tonner complete with all other required accessories.

Providing lifting arrangement for 50 x 50mm M.S. angle supported frame covers ( L- 2.8mtrs x 0.9mtrs- 3 nos.) of Neutralization Tank ( Size : L- 2.80 mtrs. x B -2.8mtrs. H/D- 2.00 mtrs. ) by Fabrication, Erection/Installation using ISMC 100mm x 50 mm channels of length 6 mtrs- 4 nos. and I beam 100mm x 55mm length 3.00 mtrs -1no as required including welding/bolting, cutting, earthwork excavation, providing and laying cement concrete, installation of 2 ton capacity chain block pulley with chain of length 6 mtrs., tools & tackles etc. Complete as directed by Engineer-in-Charge.