SPECIAL REPAIR TO BLDG NO T-146 (GROUND CREW ROOM), T-136 (TOOL STORE) OF 30 (I) R AND O FLT AT PARTAPUR, T-285 FOR ARTY REGT AT SKAMPUK AND PROVN OF 01 X CAR PARKING SHED FOR GE 873 EWS AT SKAMPUK UNDER GE 873 EWS

Amount

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets as spd and directed by Engineer -in -charge.

M&L 4 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge.

M&L 4 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge.

Dismantling timber framed in scantlings, rails, posts rafters,purlines, etc under 40 sq cm in section as specified and directed by Engineer -in -charge.

M&L for Second class Timber framed and fixed soft-wood in scantlings rectangular in section, clean swan, secured with nails, complete all as specified and directed.

Dismantling timber framed in Fillets ,rails, posts rafters,purlines, etc under 40 sq cm in section as specified and directed by Engineer -in -charge.

M&L for Second class soft-wood inplain fillet rectangular in section, clean swan, secured with nails, exc 13 and n. exc 25 sq cm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non - Skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 Complete all as specified and directed.

M&L for white glazed ceramic tiles in vertical surface 300X200 X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.

S&F aluminium anodised frame for doors, windows, ventilator, with one or more rebates incl joining cleat for fixing etc.comlete all as specified.

S&F of Anodiesed Aluminium door shutters, aluminium section weighing 0.55Kg/m incl necessary jointing cleats,glazing clips,ruber neoprene packing, handles, 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

Hacking out old broken glass (any thickness , size ,quality or discription ) from wooden frames or stone ,concrete or bricks surrounds, glazed with putty or fixed with beads complete all as specified and directed .

S&F 5.5mm thick Sheet glass, ordinary quality ,glazing with in squares exc. 0.5 sqm each pane. with ruber neoprene packing in panel all as specified.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with ruber neoprene packing in square n.exc 0.5 sq. m in each panel all as specified.

Supply and fixing PVC wall lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.

M&L 0.63mm for Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 & fixed with L-type or J-type or crancked hook bolts in lieu of screws complete all as specified and directed by Engr-in-charge.

S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F Fe-410-W (Gde-E-250) quality A Roof trusses (framed), trussed, purlin, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engr-in-charge.

M&L for preparation of new untreated steel surfaces of any description, not otherwise described over 10cm width or girth and painting with one coats of synthetic enamel paint over a coat of red oxide, zinc chromium complete all as specified and directed by Engr-in-charge.

Taking down chowkhat or frames including with shutters ( without taking of shutters from the frames) not exc 1.5 sqm each complete all as specified.

M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening complete all as specified & directed.

S&F 30mm thick Flush shutters, solid coreconstruction, with blockboard core and plywood face panels, commercial type on both sides comlete all as directed.

S&F in repairs butt hinges 100mm,heavy weight,cold rolled mild steel complete all as specefied and as directed by engineer -in-charge.

S&F in repairs 100mm aluminium handles,cast type,anodised complete all as specefied and directed by the Engineer -in -charge.

S&F in repairs 100mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed by the Engineer-in-charge.

S&F in repairs 200mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiumalloy and fixed all as specified

S&F 5.5mm thick Sheet glass, ordinary quality ,glazing with in squares exc. 0.5 sqm each pane. with ruber neoprene packing in panel all as specified.

S&F sheet glass, ordinary quality 3.0 mm thick and glazing with oil putty in square n .exe 0.5 sq.m in each pane. All as specified and directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge

S&F in repairs chromium plated fancy type 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets including waste coupling PTMT 32mm bore dia complete all as specified.

S&F in repairs for towel rail 450 mm long of PTMT fixed in repair with and including chromium plated brass screws and wooden/plastic cleats all as specified.

S&F in repairs 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm.complete all as specified.

Supply & fixing in repairs 15mm Stop valves, fancy type Chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge.

M&L for 2nd class softwood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.

Excavation in post holes ( or similar holes) in Hard/dense soil ,each not exceeding 0.50 cubic meter in any type of soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface.

M&L for PCC ( 1:2:4) type B-2 using 40mm graded stone aggreage in fdn filling and mass concrete all as per specifed.

S&F Mild steel work as in roof trusses size (40x40x5) mm (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250) Quality-A) all as per specifed.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps bases, splices, angle brackets, cleats and other connection (Fe 410-W Gde E-250 quality A).

S&F 5mm thick rolled Mild steel plates plain square cot or notched (ordinary and counter sunk) forming holes, without any attachment.(Fe-410-W(Gde E-250) Quality-A) all as per specifed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.56mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L plain fillet second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm as spd and directed by Engineer -in -charge.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in wall paneling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified.

M & L for 18/19mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with J hooks two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275 all as spd and directed by Engineer -in -charge.

M&L Preparation of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed by engr-in-charge

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)

M&L White non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed for laying floor all as specified and directed.

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/rectangular),polished, area of each tiles not exceeding 0.36 sqm in floors over 15 mm thick screed bed of CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S&F 1st class softwood 30 mm thickness plain framed ,panelled shutter (any number of panels ) ,with panels of timber flat on both sides (feather edged) , or of veneered patrticle board mediunsity ,wood particle board with commercial face veneers;supplied and fitted to chowkats.

M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.

S&F Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.

S&F mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Hacking out out old broken glass (any thickness size quality or description ) from steel or wooden frames or stone concrete or brick surrounding glazing with putty or fixed with beads complete all as specified &directed by Engineer -in-Charge.

S&F for 3 mm thick sheet glass ,ordinary quality and glazing with oil puttyin square n.exe 0.5 sqm each panes complete all as specified & directed.

S&F in repairs hat and coat hooks, anodised aluminium alloy, chromium plated, solid body, 175mm to 250 mm size and fixed to wooden plugs with screws etc complete all as specified and directed.

S&F aluminium Door closer hydraulically regulated,extruded section body designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs complete all as specified

Taking down 15 / 16 mm water supply tubing of any description and connections including cleaning for re-fixing or removal to store etc complete all as specified.

Taking down 20 mm water supply tubing of any description and connections including cleaning for re fixing or removal to store etc complete all as specified.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe etc complete all as specified and directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position complete all as specified and directed.

S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back including chromium & 45cm long with chromium plated nuts and bolts and suitable washers, PVC waste pipe 32mm bore CP waste coupling including angle iron brackets of 35x35x6mm etc complete all as specified and directed.

S&F Pillar taps Fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F Health faucet (ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m ong flexible tube & ABS wall hook including making connection & fixed In position complete in all respect as specified.

S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

S & F in repairs Brass CP tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

Dismantling of water tanks500 litres capacity of any description and removing to store complete all as specified and directed.

S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

Demolition and breaking up drain pipes salt glazed stone ware ( SGSW)/CI/PVC set in cement mortor as in sewage line ( intenal dia of pipe 100/150 mm ), complete all as specifeid and directed by engr-in-charge.

M&L, plain cement concrete 1:3:6 type C-2 ( using 40mm graded stone aggregate) for bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100/150 mm bore pipe, complete all as specifeid and directed by engr-in-charge.

M&L, PVC ( SWR) drain pipe 110 mm bore, single socketed, in any length with rubber ring joint, laid and jointed on concrete bed complete including testing al as specified ( concrete to be measured and paid separately) , complete all as specifeid and directed by engr-in-charge.

Excation in trenches, n. Exc 1.50 m wide and n. Exc 1.5 m in deep for foundation, etc or for shafts, Wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.50 in depth and getting out in hard/dense soil, complete all as specifeid and directed by engr-in-charge.

Returning, filling including spreading, levelling, watering and well ramming in layers n exc 25 cm thick, complete all as specifeid and directed by engr-in-charge.

Removing excavated material n exc 50m and deposinting where directed at a level n exc 1.5m above the starting point, complete all as specifeid and directed by engr-in-charge.

PVC bend any radius size 110mm bore with access doors complete all as specified and directed.

M&L in 75 mm PVC floor trap ,with grating including jointed to waste pipe including jointing to waste pipe fixed in cement concrete type B-1(1:2:4)

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base of floor coarse complete

M&L for chequered cement concrete tiles 20cm x 20 cm x 25cm thick , set jointed 20mm screed bed in CM 1:6 and pointed in neat cement slurry in floor with grey cement and pigment complete as spd and directed by Engineer -in -charge.

S&F Soap dish fixed to wall with chromium plated brass screws complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new surface of steel and iron surfaces any description over 10 cm width or girth over a coat of red oxide primer including prepration of surface all as per specifed.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8way/12way including MCB SP and SPN and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

(a) One light/fan/bel point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. HAVELLS Cat art no -LHEXBLP7PN1W022 or equivalent in wipro/CG/Phillips.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Single door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.

Supply and fix and replacement after taking down the old unserviceable LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter,voltage 230V,50 Hz,RPM 1200 copper winding of sweep 250mm complete all as specified and directed.

Taking up the existing cables from trenches of ant sizes all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 35 Sqmm 4 Core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 10 Sqmm 2 Core complete all as specified and directed.

M&L for GI pipe (medium grade,ISI marked) 25 mm dia laying and fixing on ground and wall for cable procetation as specified and directed by Engr in charge.

Excavation in trenches not exceeding 1.5 mtr deep for laying of cables for fixing of stay,etc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dance soil complete all as specified and directed at site.

Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site

Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge.

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured

M&L unreinforced precast factory made concreate cable cover class LV type-I with flat size 250x150x40mm complete all as specified and directed.

Deduct Schedule of Credit of Rs (-) 1,29,197.08 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S MOHD KARIM (BID ID -3357810)

ABID CONSTRUCTION COMPANY (BID ID -3359135)