Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹8,300
Closing Date
19 Mar 2021, 11:30 amClosed
EXECUTIVE ENGINEER (EnM) WnS S-III
D-Block, Saket. Opp. PVR cinema. New Delhi-110017
Repair and Rewinding of Skope Make Sub. Pump Set for Various Tube Wells in Ward No. 174 and 175 in Chhatarpur Constituency AC-46.
2021_DJB_201519_13
NIT No-27 / EE (EnM) WnS S-III
Open Tender
Electrical Works
Works
30 days
D-Block, Saket. Opp. PVR cinema. New Delhi-110017
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Delhi Jal Board
₹8,300
Yes
23 Mar 2021
12 Mar 2021
19 Mar 2021
12 Mar 2021
19 Mar 2021
12 Mar 2021
Repair and Rewinding of 5 HP 4” Diaskope make sub. Pump set no. –CHT-A-46 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Stage bowls P.P. 3 Nos., Impeller P.P. 4 Nos., Water Seals 2 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Diaskope make sub. Pump set no.–CHT-A-42 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Seal Bush 1 No., Stage Bowls P.P. 4 Nos., Impeller P.P. 4 Nos., Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Diaskope make sub. Pump set no. – CHT-A-45 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Thrust Plate 1 No., Water Seals 2 Nos., Stage Bowls P.P. 3 Nos., impeller P.P. 3 Nos., Shaft Stationing 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Diaskope make sub. Pump set no. – CHT-A-43 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 3 Nos., Impeller P.P. 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Diaskope make sub. Pump set no. – CHT-A-44 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Impeller P.P. 4 Nos, Stage Bowls P.P. 3 Nos., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-178By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-60By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Ring 5 Nos., Motor Base 1 No., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Impeller Rematling& Turning 2 Job., Epoxy Paint for Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-125 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 2 Nos., Neck Ring 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-51By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Neck Ring 5 Nos., Balancing of Rotor 1 Job., Motor Base Repairing 1 Jobs., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-49By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Shaft Stationing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-172By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 4 Nos., Balancing of Rotor 1 job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-54By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Guide Bush 6 Nos., Distance Bush 5 Nos., C.I. Stage Bowls 1 Job., Rotor end welding Turning & Polishing & Key way making 1 Job., N.R.V. Repairing 1 Job, Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-123By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Neck Rings 6 Nos., Rotor end welding turning & Polishing & Key way making 1 Job, Thrust Plate Repairing 1 Job., Stamping Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-179By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 5 Nos., Guide bush 5 Nos., Rotor end welding Turning & Polishing & key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-126By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Rings 4 Nos., Guide Bush 5 Nos., Motor Base Repairing 1 Job., N.R.V. Repairing 1 Job., Stamping Repairing 1 Job., Impeller Rematling& Turning 3 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-57By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Distance Bush 7 Nos., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-119By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Connection Piece 1 No., Guide Bush 10 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Epoxy Paint for Rotor 1 Job., Impeller Rematling& Turning 3 Job., Housing Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-174By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-50By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 4 Nos., Rotor Sleeve Turning & Polishing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-173By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 6 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 jobs., Motor Base Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-52By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 4 Nos., Rotor Sleeve Turning & Polishing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-177By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 7 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 jobs., Motor Base Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-118By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 6 Nos., Guide Bush 9 Nos., Rotor Sleeve turning & Polishing 1 Job, Stamping Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-124By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-176By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Ring 5 Nos., Motor Base 1 No., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, ImpellerRematling& Turning 1 Job., Epoxy Paint for Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-170By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Ring 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Thrust Bearing Repairing 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-175By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 3 Nos., Neck Ring 5 Nos., Balancing of Rotor 1 Job., Shaft Stationing 1 Jobs., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-59By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Water Seal 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – CHT-A-171By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 5 Nos., Balancing of Rotor 1 job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Labour Charges 1 Job
Sharma Engineering Enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .