REPAIRS TO BOUNDARY WALL GATES FENCING SECURITY WALL HARD STANDING WASTE DISPOSAL SYSTEM DRAIN RAINWATER PIPES AND VALLEY GUTTERS AT COMMON AREA UNDER AGE BR 2 AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 23-24 Ser No. 30 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Note:- The Unit Rate quoted in r/o Ser item No 1.02 to 1.52 are deemed to include for the following and nothing extra will be paid for these works: 1. Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. 2. Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

All as per BOQ srl item No. 1.02 above but pre-cast concrete block walling complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) using 20mm graded stone aggegate and setting in mortar (1:6) complete all as specified and as directed

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

All as per BOQ srl item No. 1.05 here in before but except bricks complete all as specified and directed. Note:- Serviceable bricks obatined from BOQ srl item No. 1.02 shall be re-used after cleaning etc complete all as specified and as directed

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed

All as per BOQ item No. 1.07 hereinbefore but except stone complete all as specified and directed. Note:- Servicable stones obtained from item No 1.02 shall be reused.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

M&L for raised pointing to precast concrete block masonary wall in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work /concrete surfaces ,finished even and smooth without using extra cement complete all as specified and directed.

M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over & including one coat of primer on wall/roof complete all as specified and directed

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction complete all as specified and as directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and as directed

M & L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.

M&L PCC 1:2:4 type B1 using (20 mm graded stone aggregate) as in roof kerbing, or mud stops, rounded or chafered on edges and all around of chequered tile complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed black etc including necessary form work complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40 mm graded stone aggregates agg) as in plinth protection finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L, for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in sub base of floor complete all as specified and directed

M&L for 100mm thick cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in path/floor finished fair even and smooth without using extra cement complete all as specified and as directed

M&L for machine cut broken stone or boulders of hard core of gauge not exc 63mm , deposited,spread and levelld in layers n.exc 15cm thick , watered and rammed to a true surface complete all as specified and as directed

M&L for 20mm thick Wearproof topping as specified as per manfacutre's instruction, as specified laid on concrete floors and pavings and path, and finished even and smooth (except metallic hardner) acomplete all as specified and as directed . (Note metallic hardender & glass strips shall be measured and paid separately).

Supply only 22 mm wide and 3 mm thick glass dividing strips as laid in floor complete all as specified and as directed

Supply on metallic floor hardner as per manufacture instruction complete all as specified and as directed

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over & including cement screed bed 15mm thick cement mortar 1:6 complete all as specified and as directed

M&L for 60 mm thickness Machine pressed precast concrete inter locking paver block any shape and size,with grey cement and pigment conforming to IS 15658-2006, strength not less than M-35 Grade complete all as specified and as directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L 20 mm thick Granite (of any type) work (table rubbed and ploished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick rendering in cement mortar (1:4) as in backing coat of granite complete all as specified and directed.

Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) complete all as specified and as directed

M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:4) work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided incl doors, gates for complete all as specified and as directed

S&F of Bands, straps,supports or stays for rainwater, ventailing pipes, including bolts, if required hooks,heavy, for large gates, hook and pintle hinges; large hasps and stables; chains;hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed

S&F Mild steel work as in posts and struts in fencing angle including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B complete all as specified & directed). Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement.

S&F mild steel works as in doors or gates (ornamental) of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes framed guard bars; barred iron doors, laddrs, framed balusters walk ways railings, frame work of water tank and similar work conforming to Fe- 290. Gde-E-165 complete all as specified and as directed

M&L for welding in repairs, exc 2.5 cm but n.exc 5 cm in length thickness of metal to be welded exc 20mm but n.exc 25mm complete all as specified and as directed

M&L for running welding in repairs exc 20mm but n ecx 25mm complete all as specified and as directed

M&L for preparation of new steel surfaces any description over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standerd rails, straining bolts,including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed

Restriaining resecurig including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing all as specified and directed

Taking down and refixing in same position after replaing of damage of fencing post concertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and directed

S&F in repairs any dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil complete all as specified and directed

Taking down existing angle iron from wall embadded in PCC and refixing in the same opening/position complete all as specified and as directed

S&F in repairs mild steel security chain link fencing 60mmx60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC post including binding wire complete and incl taking down of existing chain link fencing complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

S&F mild steel screw bolts 10mm dia with hexagonal or square heads at one end and screwed at other ends dia of shank 5 to 10 mm and length of bolt exc. 5cm but n.exc 10cm complete all as specified and directed.

M&L mild steel TMT bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed

M/s S.D Construction Co

S N TRADERS

K N CONSTRUCTION

DEV ENTERPRISES

Everest Construction

Shri Krishna Trading Corporation