REPAIR TO PLUMBING WORK, WATER SUPPLY AND SANITARY FITTINGS IN N-5/N-6 AREA AND REPAIR/ REPLACEMENT OF SANITARY FITTING, PLUMBING WORK AND ALLIED WORKS IN TECH AREA AT AFS CHAKERI KANPUR

Amount

Removal of air lock / blockage of water in GI tubing 15 mm / 32mm/50mm bore cleaning the pipe or fittings etc and re-fixing the same in position complete all as specified and directed.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etc for 15mm bore pipe all as specified and directed by Engr-in-charge.

S&F in repairs internal flushing kit of PVC low level flushing cistern and making in functional complete all as specified and dircted .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M& L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick(1:6) Screed bed or bedding layer for laying floor finishes complete all as specified.

M& L glazed coloured ceramic tiles in vertical surfaces 300x450x7mm or as required size at site in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on fair faces of brick work/concrete surfaces complete all as specified and dierected

M&L for full body Virified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed of CM (1:6) complete all as specified and dierected

M&L 300x450mm, ceramic vertical 3D tiles, matt/gloss, 5mm to 6mm thick tiles with high definition and digitally printed over and including 10 mm thick rendering (1:4) on vertical surface as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

S&F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified.

Cutting chases, pinnng in, iin brick walls making good to faciing where required and pointing in cement mortar 1:3 for concealed water tubing, and crossind one side of wall to another side by cutting or drilling exc 10 cm but nt exc 50 cm girth complete all as specified and as directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

M&L10mm thick plaster in CM 1:6 finished even & smooth w/o using extra cement incl 1 mm putty and 2 coat OBD over the surface of plaster all as specified and directed by Engr-in-charge.

M&L for rendering 5 mm thick plastering on ceiling in cement mortar (1:3) finished even and smooth without using extra cement including 1 mm putty and 2 coat ODB over plaster surface complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified .

S&F in repairs 10 ltrs capacity PVC low level dual flush cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair 100 mm bore dia cast iron branches pieces( tee,bend,cross & 'Y' shapes) & oval access doors ,with cement joint, fixed on walls complete all as specified.

S&F in repairs 15mm stop valves (concealed type) cast copper alloy, chromimum plated with long shank cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to flooexcluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china wash down water closet one piece with integrated cistern, seat cover and twin flush fitting complete all as specified and as directed .

S&F in repair vitreous china wash down water closet pan ( pedestral pattern) white ( excluding flushing cistern and flush pipe ) complete all as specified and as directed .

S&F in repair bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe 15 mm bore and fixed complete all as spd and directed by EIC..Make- Prayag or Cera/Essco complete all as specified and directed.

S&F in repairs 15mm bore angle valves, cast copper alloy fancy type chromium plated with flange of cat No 7610 of Make- Prayag or Cera/Essco complete all as specified and directed.

S&F in repair chromium plated shower rose fancy type of 125 mm size type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge.Make- Prayag or Cera/Essco complete all as specified and directed.

S&F in repair aluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed .

S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shankes and fly nuts screwed for iron pipes, att as directed .Make- Prayag or Cera/Essco complete all as specified and directed.

S&F in repair 15mm bore stop valves cast copper alloy fancy type chromium plated screwed down high pressure with captain head crewed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make- Prayag or Cera/Essco complete all as specified and directed.

S&F in repair 32 mm waste coupling of PTMT half or full threaded min wt 45 gmall all as specified and directed .

S&F in repairs PVC waste pipe 32/40 mm dia, 800 mm long, complete all as specified, Cat No 3271, Make Prayag or equivalent make as specified in Appx of PS.

S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.

S & Fix in repair vitreous China under counter wash basin oval type of size 56 cm x 41 cm x 18 cm of white colour including 32 mm dia waste coupling chromium plated brass and PVC waste pipe complete all as specified and as directed.

M & L for Granite 20mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling of brick work of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for brick work old size with sub class `B` bricks in cement mortar straight or curved on plan exceeding 6 m mean radius built in CM (1:4) provided complete all as specified and directed

M & L Bric kwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 as in half bricks complete all as specified and dierected

S&F in repairs health faucet cock brass chromium plated including 1M long flexible pipe of chromium plated complete all as specified and directed

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and directed

S&F in repair angle stop valve (M/T) of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and dierected

S&F in repair ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore minimum weight 210 gms complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450/600 mm, complete all as specified and as directed.

Taking down 15 mm dia GI steel tubing and connection completed all as specified and directed.

M & L tubes 15 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Taking down 20 mm dia GI steel tubing and connection completed all as specified and directed.

M & L tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), , triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

All As per item no. 46but of capacity 1000 ltr

S&F in repairs PVC cover or water storage tank of any capacity cover of PVC over head tank any capacity with hinging device, with necessary nuts, bolts and washers, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high using synthetic enamel hi glossy paint.

Taking down rain water / vent pipes (any size & pattern) including all fittings, heads, noses, bends, swan necks etc including cleaning or repairing or emoval to store, complete all as specified & directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed.

M&L Cutting existing steel tubing of size 15 mm for alterations or additions (Each cut measured) complete all as specified and as directed.

All as per above item no. 53 but of 20 mm bore complete all as specified and as directed.

S&F in repair Bib tap of 15 mm bore fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105gms) complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of 150 mm dia set in cement mortar complete all as specified and as directed.

M&L Reinforced concrte pipes 150mm bore, class NP-2, laid and jointed in trenches or in floors complete all as specified and directed

M&L PVC (SWR) pipes 110 mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) 'P’ trap 110 mm bore complete all as specified and as directed.

M&L Concrete bed of type D-2 1:4:8 to drain pipes of size 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided as per directed and specified

M&L CEMENT CONCRETE 75mm thick of type D-2 (1:4:8) using 40mm stone aggregate IN SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

S&F in repair stainless steel wall mounted automated urinal sensor complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gm) complete all as specified and as directed.

S&F in repair Paper Holder with Cover complete all as specified and as directed.

S & F in repair half stall urinal of size 420x395x635 mm as specified and directed.

S&F in repair Gun-metal, globe or gate valves, of bore 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair Gun-metal, globe or gate valves,of bore 15 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair CP urinal spreader min dimension 15.8x7.9x6.6 cm; min weight 340 gm. complete all as specified and as directed.

M&L for complete removal of exixting treatment of walls including preparation of the surfaces properly and applying two coats of oil bound distemper to achieve smooth surfaces, complete all as specified and as directed

M&L preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed .

M&L preparation of old surface of wall or ceiling and application of one coat of exterior weather emulsion paint over a coat of exterior wall primer complete all as specified and directed.

M&L for treating the wall/ceiling surface with 1 mm thick cement based putty (JK/Birala wall putty) to make surface smooth including sand papering for smooth finish, complete all as specefied and directed.

M&L cement concrete PCC type D-2, 1:4:8 100 mm thick in sub base of floor complete all as specified and directed

M&L cement concrete PCC type B-1, 1:2:4 25 mm thick in sub base of floor complete all as specified and directed

S&F in repair S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but not 4sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately

S&F aluminium anodized barrel tower bolts of extruded section length of bolta 150 mm complete all as specified and directed by Engr-in-charge

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolta 150 mm complete all as specified and directed by Engr-in-charge

S&F extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed by Engr-in-charge

S&F in repairs extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed by Engr-in-charge

S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all specified and directed.

S&F rotational moulded polythene water storage tank of capacity 250 ltrs (Cylindrical/vertical with closed top), , triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

M & L10mm thick plaster in CM 1:6 finished even & smooth w/o using extra cement and preparation of new undecorated surfaces of walls and applying two coat of exterior emulsion paint over a coat of primer, all as specified and directed.

Taking down chowkats or frames with shutter n exc 1.5 sqm each but with shutters (without taking off shutters from the frame), all as directed.

Providing and fixing factory made uPVG white colour Sliding window Three track area not exc 2 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.

M&L for sheet glass 4.8 mm thick ordinary glass in square exec 0.5 Sqm in each pane fixed in UPVC window as in item no. 15 above complete all as specified and as directed.

continentalconstructionco. (BID ID -3342877)

B R CONSTRUCTIONS (BID ID -3342871)