Construction of Road at Khanpada and completion of shed at Telenpali in W.No.18.

Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.)

Supplying, fitting and fixing vitrifed tile In floors of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand ) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer- in- Charge.

Fixing Chequed tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm .

Priming 1 coat with any appproved Primer (wood) including cost of primer etc. complete

Painting Two coat with approved paint on new MS work(labour only)

Dismantling brick or stone masonry in lime or cement mortar under 3.00 mtr height including stacking the useful materials for reuse and removing the debris within 50 metres lead.

Filling in foundation & plinth with sand watered & rammed including cost, conveyance royalty etc., Complete.

C:C: (1:4:8) using 4 cm. size H.G. C.B metal including the cost of all materials, labour carriage, royalty etc complete.

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method to attain superior smooth finish using PU or Equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, compacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/ Pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as per Manufactures Specifications and Direction of Engg -ln- Charge. 80mm thick C.C. Paver Blocks of M-40 grade with approved colour design Pattern etc. complete.

CC work of M20 Grade with 20 mm sizeand down graded black hard granite chips including cost, conveyance and royalty of all materials, cost of all labour,T&P etc. complete