Repair of Boyss and Girls Hostel building at Dr. B.R. Ambedkar Polytechnic College Ambota Tehsil Ghanari

Amount

Excavation in all kind of soil work by mechanical means (Hydraulic Excavator (3D) with driver and fuel)/ manual means in foundation trenches or drains in all kind of soil, including dressing of sides and ramming of bottoms, upto any lift, including getting out the excavated soil and disposal of surplus excavated soils as directed, within any lead as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcetera for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:3:6 (one cement:three sand: six graded crushed stone aggregate 40mm (forty millimeter) nominal size excluding cost of centring and shuttering in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(V): 20 (H) towards drawing face complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

40mm (Twenty millimetre) thick Cement concrete flooring 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate) with 20mm (twenty millimetre) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Dismantling tile work of any thickness in floors and roofs laid in cement mortar including stacking material upto any lead and lifts complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work upto all height as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing steel reinforcement and Thermo-Mechanically Treated bars of grade Fe-500D or more approved make i.e. SAIL, RINL,Shyam Steel/TISCO, Jindal Panther (JSPL) for reinforced cement concrete work including bending cutting straightning and placing in position binding all complete upto any floor level/height as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 18mm (Eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete upto all floor levels as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 25mm (twenty five millimetre) thick Kota stone slab flooring over 20mm (twenty millimetre) thick average base of cement mortar 1:4 (one cement isto four coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete upto all floor levels as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying vitrified floor tiles 600x600mm (Six hundred into six hundred millimetre) (thickness specified by the manufacturer) make of Kajaria/NITCO/ Somany/ Orient/RAK/ Johnson & Johnson with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of required colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etetera, complete upto all floor levels as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1st quality ceramic glazed floor tiles of size 300x600mm/300x450mm (Three hundred millimetre into six hundred millimetre oblique three hundred millimetre into four hundred fifty millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) make of Kajaria/NITCO/ Somany/ Orient/RAK/ Johnson & Johnson of required colur and shade in skirting, risers of steps and dados over 12mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete upto all floor levels as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium work of Hindalco/Jindal/Indian Aluminium Corporation for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Polyester powder coated aluminium minimum thickness of polyester powder coating 50 (Fifty) micron as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium work of Hindalco/Jindal/Indian Aluminium Corporation for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium minimum thickness of powder coating 50 (Fifty) micron as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick preliminated particle board, decorative lamination on one side and balancing lamination on other side, make of Novapan/ Kitply/ National/ Archidply/ Action Tesa/ Green Ply ISI marked and of approved shade flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade-l Type-ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred twenty five millimetre) aluminium handles make of PILOT/Sheel, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into ten millimetre) aluminium tower bolts ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into ten millimetre) aluminium tower bolts ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of any area, any thickness including chowkhats, architrave, holdfasts etcetera complete and stacking upto any lead, lift and other incidentals as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Taking out existing wooden door shutter, repair by cutting, painting etcetera and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etcetera as required, all complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing cup board shutters with 25mm (twenty five millimetre) thick veneered particle board, decorative veneering on one side and commercial veneering on other side make of Novapan/ Kitply/ National/ Archidply/ Action Tesa/ Green Ply IS : 3097 marked, exterior grade (Grade I) make , including IInd class teak wood lipping of 25mm (twenty five millimetre) wide x 12mm (Twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick ISI marked flush door shutters conforming to IS : 2202 of Centuary ply board /Kitply) green ply (Part I) decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4mm (one point four millimetre) in both directions with wire of dia 0.63mm (zero point six three millimetre) for doors, windows and clerestory windows with hinges and necessary screws as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 4mm (four millimetre) thick glass panes of modi guard/saint gobain (weight not less than 10.00 kg/ sqm (ten kilogram per square metre) glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Galvanised mild steel wire gauze with 0.63mm (zero point six three millimetre) dia wire and 1.4mm (one point four millimetre) aperture on both sides fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm (fifteen into three millimetre) and nuts & bolts complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials upto any lead, lift and other incidentals as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick flat pressed 3 (three) layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etcetera complete as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government (frame work to be paid separately):

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862 as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government (frame work to be paid separately):

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point ninety litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm ( ath the rate of zero point eighty litre per ten square meter) of approved brand and manufacture ICI (Dulex Gloss)/ Nerolac/ Berger (Luxol High Glass)/ Asian Paint (Premium ApcoliteGlass)/ Shalimar make in all height/ in all floor level as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five litre per ten square meter) of approved brand and manufacture ICI (Dulex Gloss)/ Nerolac/ Berger (Luxol High Glass)/ Asian Paint (Premium ApcoliteGlass)/ Shalimar make in all height/ in all floor level as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Repairs to plaster of thickness 12 mm to 20 mm (Twelve millimetre to twenty millimetre) with cement mortar 1:4 (one cement isto four fine sand) in patches of area 2.5 sqm (Two point five square metre) and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering with first quality acrylic distemper (ready mixed) having VOC (Volatile organic compounds) content less than 50 gms/litre (fifty grams per litre) of approved brand and manufacture of Nerolac/ Berger (Bison Acrylic)/ Asian Paints (Tractor, Acrylic)/ Shalimar of required shade and colour complete in all height/ in all floor level as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint of required shade two or more coats applied on walls @ 1.25 ltr/10 sqm (at the rate of one point two five litre per ten square metre) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (at the rate of zero point seven five litre per ten square metre) for interiors and exteriors using Primer of approved brand and manufacture ICI (Dulex Gloss)/ Nerolac/ Berger (Luxol High Glass)/ Asian Paint (Premium ApcoliteGlass)/ Shalimar make in all height/ in all floor level as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) of preferred make of Cera/Hindware with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern and C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass bib cock of preferred make of Jal, Jaquar/Prayag/Hindware conforming to IS:8931 as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipe with brass unions as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimnetre) diametre P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimnetre) diametre P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per CPWD specifications 2019 and direction and entire satisfaction of the Engineer in charge. TThe rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore, 80mm (eighty miullimtre) long, 42mm (forty millimetre) high and 30mm (thirty millimetre) wide with BSP female threads PTMT urinal cock make of Paryag or its equivalent as per CPWD specifications 2019 and directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm (Four hundred thirty into two hundred sixty into three hundred fifty millimetre) and 390x375x590mm (Three hundred ninety into three hundred seventy five into five hundred ninety millimeter) sizes, preferred make of Cera/Hindware including necessay fittings and making good the walls and floors wherever required complete as per CPWD specifications 2019 and directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing White Vitreous China Wash basin size 630x450mm (six hundred thirty into four hundred fifty millimetre) preferred make of Cera/Hindware with a single 15mm (fifteen millimetre) C.P. brass pillar tap make of JAL/JAQUAR/ Kingston/ Gem/ Techno, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per CPWD specifications 2019 and directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin preferred make of Cera/Hindware of required shade having recessed at the back for the reception of pipes and fittings complete as per CPWD specifications 2019 and directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 10.00 (ten) litre capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete as per CPWD specifications 2019 and directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 610x510mm (six hundred ten into five hundred ten millimetre) bowl depth 200mm (two hundred millimetre) as per IS:13983 make of AMC/ UNIK/ DIAMOND with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore G.I. Pipes make of Jindal (Hissar)/BST /Prakash Surya complete with G.I. fittings and clamps, i/c making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Pipes make of Jindal (Hissar)/BST /Prakash Surya complete with G.I. fittings and clamps, i/c making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore G.I. Union in G.I. pipe make of Jindal (Hissar)/BST /Prakash Surya complete including cutting and threading the pipe and making long screws etcetra complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Union in G.I. pipe make of Jindal (Hissar)/BST /Prakash Surya complete including cutting and threading the pipe and making long screws etcetra complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore ISI marked, brass ball valve of approved quality, High or low pressure, with plastic floats complete including cutting and threading the pipe and making long screws etcetra complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore ISI marked, brass ball valve of approved quality, High or low pressure, with plastic floats complete including cutting and threading the pipe and making long screws etcetra complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and placing three layered PVC (Poly Venyl Chloride) water storage tank ISI marked 12701 (Twelve thousand seven hundred one) Sintex/Supreme/Finolex make tripple layer complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including providing pads of sizes as required for inlet and outlet complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Stainless Steel AISI-304(18/8) Wash basin 530x345mm (Five hundred thirty into three hundred forty five millimetre) with CI brackets, single 15mm (fifteen millimetre) C.P. brass pillar taps, 32mm (thirty two millimetre) C.P. (chromium plated) brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Gaurav Kumar