Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹5,000
Closing Date
4 Aug 2026, 5:00 pm
Executive Engineer REW Kishtwar
HALL NO. 4 LOWER BLOCK MINI SECTT KISHTWAR O/O Executive Engineer REW Kishtwar
REFER BOQ
2026_RDPR_317075_12
e-NIT No 35 of REW KISHTWAR 2026-27 Dated. 20 .07.2026
Open Tender
Civil Works
Percentage
KISHTWAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹5,000
Yes
21 Jul 2026
21 Jul 2026
5 Aug 2026
21 Jul 2026
4 Aug 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc., including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : | 16.2 | cum | 479.3 | ₹7,764.66 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | 3.55 | cum | 4,826.5 | ₹17,134.08 |
| 3 | Random Rubble masonry with hard stone in foundation and plinth
including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse
sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and
curing complete with:
Cement mortar 1:6 (1 Cement : 6 coarse sand) | 16.65 | cum | 5,402.9 | ₹89,958.28 |
| 4 | Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete. | 498.3 | Kg | 120.8 | ₹60,194.64 |
| 5 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) | 32.75 | sqm | 266.8 | ₹8,737.7 |
| 6 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns | 47.4 | sqm | 706.5 | ₹33,488.1 |
| 7 | Sand & Agg for 10 KM by MT & 500 M By AT/ HL | 6.3 | cum | 872.92 | ₹5,499.4 |
| 8 | Stones 700 m by Hl/At | 16.65 | cum | 904.28 | ₹15,056.26 |
| 9 | Add Cost for Signboard | 5 | No | 2,500 | ₹12,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
BOQ_1037493.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].