SPECIAL REPAIRS TO CHITRAKOOT T-7 AT MUTAGA ATS BELGAVI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings Not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of brickwork or stone/ boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but all as specified and directed.

Dismantling plain or corrugated steel, sheeting, any gauge, thickness, in roof coverrings all as specified and directed.

Dismantling posts or struts(Wood, steel or RCC) any section, including taking out embedded poriton and making good disturbed ground all as specified and directed.

Dismantling chain link fencing , any thickness or mesh, fixed with steel or wood fillets all as specified and directed.

Dismantling structural steel work including doors, gates, but excluding framed truss etc. all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section and in any position in framed work all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section and in any position in unframed work all as specified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sq cm as in section as in un framed work all as specified and directed.

Excavation in trenches n. exc. 1.50m wide and n exc 1.5 m in depth; and in pits not exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm all as spcified and directed.

Removing surplus excavated soil to a distance exc 50m and depositing where directed at a level n exc 1.5km above the starting point all as spcified and directed.

Removal of concrete and plaster debris to a distance 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundations and similar works all as specified and directed.

Material and labour for RCC type B1 1:2:4 (20mm aggregate) nominal mix in foundation, including rafts, footings, plinth beams, bases for columns etc and mass concrete all as specified and directed.

Material and labour for RCC type B1 1:2:4 (20mm aggregate) nominal mix in columns all as specified and directed.

Material and labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and directed.

Material and labour for RCC (1:2:4) type B1 using 20mm graded stone aggregates in copings etc including necessary formwork and weathering slightly rounded or chamfered angles and throating etc all as specified and directed.

Material and labour for precast cement concrete louveres and jallies, type Bo, 1:2:4 (12.5mm graded stone aggregates), 50mm thick (Measured solid), including all mouldings set in CM 1:4. all as specified and directed.

Material and labour for precast cement concrete 1:2:4 type B1 (20mm agg) for cover Slabs (for man holes etc) setting in cement mortar(1:4) all as specified and directed

Material and labour for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 all as specified and directed

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in brick wall built in cement mortar 1:6all as specified and directed.

Use & waste of timber form work to soffits of floor or roof beams, bressumers, lintels and simlar works not exc 200 mm thick including supports, overhangs for flat fair finished surfaces complete all as specified and as directed.

Use and waste form work to sides of col footings, plinth beams (sides and soffits) etc with rough finished surfaces of concrete flat all as specified and directed.

Use and waste of form work to sides of columns, pillars etc with rough finished surfaces of concrete flat all as specified and directed.

Material and labour for IInd class hard wood in scantling timber for un framed work wrought all as specified and as directed.

Material and labour for IInd class hard wood in scantling timber for framed work wrought all as specified and as directed.

Taking down chowkhats or frame n. exc 1.5 sqm with shuttter ( without taking off shutter from the frames) all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm and n.exc 4 sqm with shuttter (without taking off shutter from the frames) all as specified and directed.

Supply and fix flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply and fix solid PVC cabinet shutter of 12 mm thick PVC prelaminated board including frame of approved make fixed in kitchen cabinet or similar works complete all as specified and directed.

Supply and fix continuous (piano) hinges, of width of flap 30 mm brass, bright finish or electrogalvanised all as specified and directed.

Supply and fix Brass handles of size 75 mm cast type, polished bright all as specified and directed.

Supply and fix ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

Supply and fix Butt hinges of 100 mm medium weight, cold rolled mild steel, all as specified and directed.

Supply and fix 150 mm long aluminium anodised handle cast type all as specified and directed.

Supply and fix 200 mm long aluminium anodised barrel tower bolt all as specified and directed.

Supply and fix 300 mm Aluminium alloy ,anodised sliding door bolt with hasp and stapple all as specified and directed.

Supply and fix Floor door stopper overall length of cover plate 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

Supply and fix stainless steel Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply and fix anodised aluminium powder coated frame for doors, windows and for partition walls with one or more rebates including joining cleat for fixing etc completeall as specified and directed

Supply and fix anodised aluminium powder coated window and ventilator shutters, side hung type /sliding type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing cleaps, rubber neoprane packing, aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long for each shutters, hinges type B-21, 100mm long -2 Nos, handles 2 Nos of suitable size, Tower bolts 2 Nos in each windows etc complete all as specified and directed.

Supply and fix anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fix 125mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete,all as specified and directed.

Supply and fix TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fix TMT bars 5mm and over upto and including 10mm dia TMT bars in stirrups, spaces and binders in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fix TMT bars for reinforcement 8mm dia cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

Supply and fix framed work as in doors or gates of angles or other section with gusset plats, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guiedes) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified

Supply and fix aluminium powder coated fancy grill of thickness 4mm to 5 mm fixed to wall or aluminium section complete all as specified and directed.

Supply and fix anodised powder coated aluminium of any colour snap grid of size 605x605mm frame work for false ceiling (thickness of powder coating not less than 50 micron) including hangers 6mm dia GI (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and 12mm thick Gypsum board of size 600x600mm glosy finish pre painted in ceiling (2 coats of distemper over a coat of primer) fixed with screws as per manufacturers instructions complete all as specified and directed.

Material and labour for plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters of thick ness 1mm drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed.

Material and labour for cement concrete type D2 (1:4:8) 40 mm aggregate 75 mm thick as in sub base all as specified and directed.

Supply only river sand all as specified and directed.

Material and labour for Machine pressed rubber moulded coloured precast concrete interlocking paver blocks / tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006, Grade M-35, 60 mm thickness laid over 50 mm thick sand cushion including compacting as necessary all as specified and directed. (Note: Supply of Sand shall be measured and paid seperately).

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM (1:6) all as specified and directed.

Material and labour for designer rubber moulded cement concrete tiles of approved colour and pattern of size 200 x 200 x 25 mm / 300 x 300 x 25 mm thick tiles with grey cement and pigment set and jointed and pointed in neat cement slurry all as specified and directed.

Material and labour for cement concrete tiles 25cm x 25cmx 25mm thick, m a c h i n e pressed with grey cement and pigments set jointed and pointed in neat cement slurry in floors, and cut and polished all as specified and directed.

Dismentling of Wall and ceiling boards (fire, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets all as specified and directed.

Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in sub floors all as specified and directed.

Material and labour for coloured Non skid ceramic tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6. all as specified and directed.

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 300 x 450 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4 all as specified and directed.

Material and labour for 20mm thick granite work (table rubbed polished ) for steps, jambs, pillars, window cills and similar items in CM 1:4 including pointing in white cemnet 1:2 using marble dust with admixture of pigment to match with shade of granite over10 mm thick backing coat CM 1:4 all as specified and directed.

Material and labour for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shades of granite stone including grinding and polishing complete over 15 mm thick screed bed in cement mortar 1:4 all as directed and specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situtations all as specified and directed.

Engraving letters on granite stone walls, size of letter not exc 15 cm in height including painting with approved colour all as specified and directed

Material and labour for 20mm thick GREEN MARBLE on vertical surfaces of walls and similar work in CM 1:4 including pointing with white cement and marble dust in the ratio of 1:2 mixed with admixture of pigment to match the shade of green marble over10 mm thick backing coat CM 1:4 all as specified and directed.

Material and labour for 10mm thick rendering CM 1:4 on fair faces of concrete walls etc finished even and smooth without using extra cement all as specified and directed.

Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc. all as specified and directed

Material and labour 15 mm thick cement plaster in CM 1:6 on walls finished even & smooth without using extra cement all as specified and directed

Material and labour 15 mm thick cement plaster in CM 1:4 over concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

Material and labour for Etching on glass to design as directed including making emblems of any type and size complete all as specified and directed.

Supply and fix solar film reflective type 50 micron thick sticked to glass pane as per manufacturers instructions all as specified and directed.

Material and labour for two coats of synthetic enemal paint over a coat of pink primer on new wooden surface including preparation of new wooden surface complete all as specified and directed.

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and directed

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer over and including a thin layer of wall putty to achieve smooth finish all as specified and directed

Material and labour for complete removal of existing treatment of old decorated surface and applying two coats of oil bound distemper over and including a thin layer of putty on walls all as specified and directed

Material and labour for finishing new wall surface and applying Acrylic Smooth exterior paint of approved shade withTwo or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as spcified and directed.

Material and labour for painting steel and iron work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of Zinc chromeate primer all as specified and directed.

Material and labour for preparation of old decorated surface by washing, rubbing down and stopping and applying a coat of weather proof exterior emulsion on of walls, pillasters, roof projections, facias, drops, chajjas, etc., all as specified and as directed.

Material and labour for two layers of CRACK X-PASTE filling compound on internal/ external faces as in wall and ceiling for filling in cracks (size of filling shall not be more than 5mm wide and 5mm deep complete all as specified and directed.

Material and labour for applying Brush bond RFX two components elastomeric cementitious water proofing coating for wall surfaces of 1mm thickness over plastered surfaces all as specified in manufactured instruction and as directed.

Material and labour for preparation of surfaces of wood or wood based material new or old any description and girth and applying two coats creosote all as specified and as directed.

Material and labour for preparation of surfaces of wood or wood based material new or old any description and girth and applying one coats creosote oil all as specified and directed.

Taking down 15 mm bore steel tubing and connection including bib taps, stop cock, showers etc. all as specified and directed.

Taking down 20mm bore steel tubing and connection including bib taps, stop cock, showers etc. all as specified and directed.

Supply and fix 1000 Ltr cap PVC water tanks rotational moulded polyethylene water storage tank three layer cylinderical vertical with same capacity with closed top hoisted and fixed in position all as specified in SSR part I including complete set of ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25 mm dia including dismantling of existing water tanks and removing all as specified and directed.

Supply and fix 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe aii as specified and directed.

Supply and fix 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe aii as specified and directed

Supply and fix 25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe all as specified and directed

Supply and fix in repairs vitreous china wash down water closet pan pedestal pattern single piece suite (including flushing cistern and flush pipe ) including all accessoreis i.e seat cover, Health faucet Parry ware T9941A1 cardiff with SS Hose & Hook (Brass) Make Parry ware Cat Part No inslim C8905 or equivalent all as specified and directed.

Supply and fix in repair wall mixture both hot and cold supply fixed and screwed to pipes all as specified and directed. Make Parry ware Dice (quarter turn range) G4016A1 wall mixer 2 in 1 or equivalent all as specified and directed

Supply and fix in repair 15mm Parry Ware G0604A1 bib cock with wall flange or equivalent bib taps screwed for iron pipe all as specified and directed.

Supply and fix in repair Parry ware Verve (single lever Range) T3902A1 or equivalent 15mm pillar tap fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and fix in repair 15mm Parry ware Angle Valves T9926A1 star or equivalent make in Kohlar / Roca / Jaquar fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specified and directed.

Supply and fix in repair 15 mm Parry ware two way Angle Valves G4643A1 or equivalent make in Kohlar / Roca / Jaquar fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specified and directed.

Supply and fix in repair 15mm Parry ware Diamond concealed stop cock G1851A1 or equivalent make in Kohlar / Roca / Jaquar fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specified and directed.

Supply and fix in repair Parry ware SS over head Rain showers T9990A1 400 MM or equivalent make in Kohlar / Roca / Jaquar fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specified and directed.

Supply and fix 15 " wall mounted Parry ware shower arms T9802A1 or equivalent with shower hook all as specified and directed.

Supply and fix in repair 15mm Parry ware two way bib cock Diamond (quarter turn range) G1867A1 or equivalent make in Kohlar / Roca / Jaquar chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specified and directed.

Supply and fix Parry ware T6408A1or equivalent make in Kohlar / Roca / Jaquar stainless steel tower rack chromium plated as specified and directed.

Supply and fix Parry ware T6504A1 or equivalent make in Kohlar / Roca / Jaquar wall mounted tumbler holder all as specified and directed.

Supply and fix Parry ware T6505A1 or equivalent wall mounted toilet paper holder all as specified and directed.

Supply and fix Parry ware T6704A1 or equivalent make in Kohlar / Roca / Jaquar wall mounted corner glass shelf all as specified and directed.

Supply and fix sinks with drainage board made of stainless steel l.00 mm thick kitchen or laboratory with plugs,washers and wastes; including coupling,waste pipe bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Supply and fix PVC floor trap, plain with stainless steel grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of size 100 mm/ 75 mm all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Supply and fix PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

Supply and fix PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

Supply and fix PVC bends for 75 mm bore pipe all as specified and directed.

Supply and fix PVC bends with access door for 110 mm bore pipe all as specified and directed.

Supply and fix PVC (SWR) vent cowl 110 mm dia all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable drawn in and including PVC casing caping 20/25 mm width complete with all accessories including Modular metal flush box, modular white cover plate with frame for fixing modular switch, socket, regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/distembering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete all as specified and directed.

One light/fan/bell point controlled by one, one way switch 5 Amps complete

One 3 pin modular socket outlet, 5 Amps, independent

One 3 pin modular socket outlet, 5 Amps on the same board with other switches

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable drawn in and including PVC casing caping 20/25 mm width complete with all accessories including Modular metal flush box, modular white cover plate with frame for fixing modular switch, socket, regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/ distembering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for one light point controlled by two 2-way modular switches on independent board.all as specified and directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 2.5 Sqmm FRLS copper Cable drawn in and including PVC casing caping 20/25 mm width complete with all accessories including Modular metal flush box, modular white cover plate with frame for fixing modular switch, socket, regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/ distembering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 2.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for one 3 pin modular socket outlet 15 Amps independent with cable 2.5 sq mm size all as specified and directed.

Supply and fix modular metal flush box 1/2 module all as specified and directed.

Supply and fix modular metal flush box 3 module all as specified and directed.

Supply and fix modular metal flush box 4 module all as specified and directed.

Supply and fix modular metal flush box 6 module all as specified and directed.

Supply and fix modular metal flush box 8 module all as specified and directed.

Supply and fix modular metal flush box 12 module all as specified and directed.

Supply and fix modular switch 1 way 6A, 1 module all as specified and directed.

Supply and fix modular switch 2 way 6A, 1 module all as specified and directed.

Supply and fix modular Bell push 6A 1 module all as specified and directed.

Supply and fix modular switch 1 way 16A, 1 module all as specified and directed.

Supply and fix modular Fan step regulator, 120W - 2 module all as specified and directed.

Supply and fix modular Socket, 6A - 2/3 combined 2 module all as specified and directed.

Supply and fix modular Socket, 16A - 2/3 combined 2 module all as specified and directed.

Supply and fix white cover plate with frame, 2 module all as specified and directed.

Supply and fix white cover plate with frame, 3 module all as specified and directed.

Supply and fix white cover plate with frame, 4 module all as specified and directed.

Supply and fix white cover plate with frame, 6 module all as specified and directed.

Supply and fix white cover plate with frame, 8 module all as specified and directed.

Supply and fix white cover plate with frame, 12 module all as specified and directed.

Supply and fix Bell Ding Dong AC 230 volts, single pole all as specified and directed.

Supply and fix ceiling rose, surface type PVC, 50x25mm, three terminals complete all as specified and as directed.

Supply and Fix REGAL Batten for LED tube with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Supply and fix in repair Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp all as specified and directed.

Supply and fix in repair PLUTO NEO PANEL 2'x2' enviromental freindly, new generation, asthetically designed ultra modern recess/ surface mounting luminaire with high brightness SMD LEDs as light source, suitable for ceiling of size 600x 600 mm complete all as specified and directed.

Supply and fix in repair sheet metal enclosure factory made double door for Vertical TPN DB 4 Way suitable for fixing TPN MCB 63 Amps main incoming complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure factory made double door for SPN DB 12 Way complete all as specified and as directed..

Supply and fix in repair sheet metal enclosure factory made double door for SPN DB 8 Way complete all as specified and as directed.

Supply and fix in repair MCB TPN 63 Amps 240 volts, 50 Hz AC supply complete all as specified and directed.

Supply and fix in repair MCB SPN 40 to 63 Amps 240 volts, 50 Hz AC supply complete all as specified and directed.

Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified and directed.

Supply and fix in repair MCB SP 63 Amps 240 volts, 50 Hz AC supply complete all as specified and as directed.

Supply and fix in repair MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified and as directed.

Supply and fix in repair post top lantern LED 25 Watt with IP 65 prewired with all accessories complete all as specified and directed.

Supply and fix in repair decorative, wall mounting, brushed nikel finish fixture with Opal Glass diffuser suitable with 2x 9 W LED lamp base 22 with 9 Watt LED Bulb all as specified and directed.

Supply and fix wall mounted decorative 3 Watt LED bed side light all as specified and directed.

Supply and fix 11 Watt LED adjustable mirror light all as specified and directed.

Supply and fix 10 Watt environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. all as specified and directed.

Supply and fix environmental friendly, new generation, energy saving, decorative rectangular shaper wall recessed Luminaire with SMD 7 Watt LED IP-66 protection as light source complete all as specifed and directed.

Supply and fix Motor Starter for 2 ton AC, 25 Amps complete all as specified and as directed.

Supply and fix decorative, wall mounting fixture, in durable plastic body & designer mesh gold finish suitable for 9 watt LED lamp B22 base with 9 Watt LED Bulb .all as specified and as directed.

Supply and fix Solar Sturdy LED Bollard with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding with IP-66 protection all as specified and as directed.

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE:- Two runs of 4 sq mm cable and one run of 4 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Supplying, laying, testing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm x 4 core complete all as specified and as directed including taking down old UNSV UG cable. Note :- Earth work shall be measured and paid seperately.

Supply and spread river sand for cable cushioning in trenches all as specified and directed. Note :- Punned depth shall be measured for payment.

Supply and laying well burnt sub class B bricks old size bricks, laid flat dry, in trenches with width of the bricks laid to the axis of cable for cable protection complete all as specified and as directed.

Material and labour for GI pipes light grade galvanised with all fitting and fixed complete to poles/ route/ drains etc and ceillings or laid in floors of 40 MM dia all as specified and directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12 mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in Electrical Plate No 3 of SSR Part-I and testing on completion.

S&F Wall mounting fan, 400mm sweep, suitable to AC single phase 230/240 volts with speed and swing adjustment fixed to wall with bolt/screws complete as specified and directed.

Supply and fix exhaust fan, single phase, heavy duty, PVC body, 250 mm (12") sweep, 900 RPM including fixing of mounting frame in the round hole cutting in the wall of brick/stone masonary by means of rugged bolts, nuts and washers etc & making good disturbed surfaces of walls etc, including louver shutter on outer surface of the wall and connecting with and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan complete all as specified and directed. Note : Quoted rate is deemed to be included the cutting in the wall and making good the surface to match with the existing surfaces.

Supply and fix 9 watt spot light new generation LED adjustable type IP-66 protection complete all as specified and as directed.

Supply and fix Blank plate for Modular switch board complete all as specified and as directed.

Supply and fix Blank plate for MCB DB's complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and directed.

Material and for providing cement concrete PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate) as coping around poles etc complete including necessary formwork and finishing the exposed surfaces even and smooth without using extra cement all as specified and as directed.

RAJENDRA KRISHNA SARAF

M/S MAHADEV M PATIL

Raghu M Contractor

M/S ADITYA CONSTRUCTIONS