REPAIR MAINTENANCE OF ALL TYPES OF WOODEN FURNITURE INCLUDING POLISHING FOR MARRIED AND OTM ACCN AND UNITS UNDER GE SEVOKE ROAD

Amount

CHAIR DINING (FD-279)

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as per item No 1.01 above but front leg

All as per item No 1.01 above but side rail

All as per item No 1.01 above but front/ back rail

All as per item No 1.01 above but stiffner

All as per item No 1.01 above but back strip

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge.

Recanning of chair dining with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

CHAIR DINING JCO/ORS (FD/MAP-II/05)

M&L for removal of old existing unsv PVC seat of chair, S&F new PVC seat 4mm thick and 2 Nos of additional stiffner at bottom of seat with holes screwed with rails all as specified in drg and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as per item No 2 .02 above but front leg

All as per item No 2.02 above but side rail

All as per item No 2.02 above but front/ back rail

All as per item No 2.02 above but stiffener

All as per item No 2.02 above but wooden back strip

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR WOODEN BOTTOM W/O ARMS (FD-285)

M&L for removal of old existing unsv plywood seat as existing of chair in any position, S&F new BWR grade 6mm plywood seat of appropriate size as per drawing and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood (teak)

All as per item No 3.02 above but front leg

All as per item No 3.02 above but side rail

All as per item No 3.02 above but front/ back rail

All as per item No 3.02 above but wooden back strip

All as per item No 3.02 above but stiffener

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR WRITING (FD-280)

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as per item No 4.01 above but front leg

All as per item No 4.01 above but side rail

All as per item No 4.01 above but front or back rail

All as per item No 4.01 above but back strip

All as per item No 4.01 above but arm rest

All as per item No 4.01 above but stiffner

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Recanning of chair writing with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

CHAIR EASY (FD-229)

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as per item No 5.01 above but front leg

All as per item No 5.01 above but side rail of seat frame

All as per item No 5.01 above but front or back rail of seat frame

All as per item No 5.01 above but side rail of back frame

All as per item No 5.01 above but top or bottom rail of back frame

All as per item No 5.01 above but replacement of arm rest

S & F new hard PVC/ rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Recanning of chair writing with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

SOFA SET 04/05 SEATER WITH CUSHION (FD-281)

M & L for removing old unsv front leg and S&F of new front leg as per existing shape and size.

All as per item No 6.01 above but Rear Legs.

All as per item No 6.01 above but Side Rails.

All as per item No 6.01 above but Front Rails for Large three seater.

All as per item No 6.01 above but Back Rails for Large three seater .

All as per item No 6.01 above but Front Rails for Single seater.

All as per item No 6.01 above but Back Rail for Single Seater.

All as per item No 6.01 above but Arm Rests.

All as per item No 6.01 above but Wooden Bearers for Large three seater.

All as per item No 6.01 above but Wooden Bearers for Single seater

All as per item No 6.01 above but Teak Wood Batten for Seat and Back

Supply of Cushion of size 21'x22'x4' Foam 40 Density 100mm thick (Make : Sleepwell/Curl-on Goldline/Featherfoam with Cushion cover of superior quality duly Stiched as per direction of Engr-in-charge/GE . Quality of tapestry Cloth shall be as per sample kept at GE office . Colour of tapestry cloth shall be approved by Engr-in-Charge/Garrison Engineer.

PEG TABLE (FD-384)

Removing of old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Replacement of old existing unsv leg from existing peg table and S&F the same size new leg made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per item No 7.02 above but long top rail.

All as per item No 7.02 above but short/ bottom rail.

All as per item No 7.02 above but stiffener of Peg table.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TEAPOY (FD-382)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as per item No 8.01 above but leg made of 1st class hard wood(teak)

All as per item No 8.01 above but long rail

All as per item No 8.01 above but short rail

All as per item No 8.01 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING (JCOs/ORs) 1200 X 900 MM (FD-273, FD/MAP-II/03

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood) for Table dining 4 persons.

All as per item No 9.01 above but S&F new leg made of 1st class hard wood

All as per item No 9.02 above but long rail

All as per item No 9.02 above but short rail

All as per item No 9.02 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 mm without drawer (FD-284)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as per item No 10.01 above but leg made out of 1st class hard wood

All as per item No 10.02 above but long rail

All as per item No 10.02 above but short rail

All as per item No 10.02 above but bottom centre stiffener

All as per item No 10.02 above but bottom side stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 mm with drawer (FD-283)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as per drg and as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as per item No 11.01 above but leg made out of 1st class hard wood

All as per item No 11.02 above but long rail

All as per item No 11.01 above but short rail

All as per item No 11.01 above but drawer with fittings

All as per item No 11.01 above but bottom centre stiffener

All as per item No 11.01 above but bottom side stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Bed Hard (FD-246)

Removing old existing unsv Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

Removing old existing unsv long rails of bed hard and S&F new long rails as per existing shape and size.

Removing old existing unsv short rails of bed hard and S&F new short rails as per existing shape and size

Removing old existing unsv head wing board of bed hard and S&F new Head Wing Board as per existing shape and size

Removing old existing unsv foot wing board of bed hard and S&F new Foot Wing Board as per existing shape and size

Removing old existing unsv leg of bed hard and S&F new leg as per Existing Shape and Size

Removing old existing unsv stiffner of bed hard and S&F new Stiffner as per existing shape and size

Removing old existing unsv teak face ply of head wing board and S&F new Teak Face Ply of Size 04mm Of Head Wing Board.

Removing old existing unsv teak face ply of foot wing board and S&F new Teak Face Ply of Size 04mm Of foot Wing Board.

TV Trolley (FD/E6/MAP/04 R )

Removing damaged wheel of TV Trolley and S&F of new 50 dia swivel type coaster. complete all as directed.

Removing damaged top of TV Trolley and S&F of new 18mm prelaminated particle board top with edge moulded all round with circular cutout for wire manager. complete all as directed.

Removing damaged sides/back of TV Trolley and S&F of new 18mm prelaminated particle board top with edge moulded all round with circular cutout for wire manager. complete all as directed.

Removing glass shutter of TV Trolley and S&F of new 5.5mm openeable glass shutters with steel hing and magnetic catcher. complete all as directed.

TABLE CENTRE (FD-274)

Removing of old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board all as per drg and as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Replacement of old existing unsv leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per item No 14.02 above but long rail.

All as per item No 14.02 above but short rail.

All as per item No 14.02 above but stiffener of table centre.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

POLISHING OF WOODEN FURNITURE

Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge.

Chair Dining. (FD-279)

Chair Dining JCO/Ors. (FD/MAP-II/05)

Chair wooden bottom w/o arms. (FD-285)

Chair Writing. (FD-280)

Chair Easy. (FD-229)

Sofa Set 04 seater . (FD-281)

Sofa Set 05 seater (FD-281)

Peg Table. (FD-384)

Teapoy (FD-382)

Table Dining 1200x900mm. (FD/MAP-II/03)

Table 900x600mm without Drawer. (FD-284)

Table 900x600mm with Drawer. (FD-283)

Bed Hard. (FD-246)

Table Centre (FD-274)

J.S.M. FURNITURE

M/S HARMANS

M/S K P S CONSTRUCTIONS

SRI SURAJIT SENGUPTA

M/S BHARAT CONSTRUCTION

M. K. ENTERPRISES

SHRI M K SAHA

M/S BOSE CONSTRUCTION