REPAIR/MAINT/REPLACEMENT OF CRANES,LIGHTENING CONDUCTOR TESTING OF EARTHING,PERIODICAL TESTING OF CRANES AND ALLIED WORKS AT MIL STN SURANUSSI

Amount

Periodical load testing and greasing of flame proof EOT/HOT cranes of capacity 3 Ton single/double girder for all motion i.e hoisting traverse, cross travel and longitudinally in full loaded condition, testing including preparation of surface by cleaning /rubbing /scrapping and Greasing as required complete painting with two coats of synthetic enamel yellow paint of existing color using spray gun and marking SM No etc complete all as specified and directed. (The load near one end shall be provided by the Department and be transported to other end and again brought back to the first end is contractors responsibility).

All as per ser item No 1 here-in-before but EOT/HOT crane of capacity 5 Ton single/double girder complete all as specified and directed.

All as per ser item No 1 here-in-before but EOT/HOT crane of capacity 10 Ton single/double girder complete all as specified and directed.

Supply and fixing in replacement Start push button of Make BCH/TECHNIQUE or equivalent complete all as specified and directed.

Supply and fixing in replacement Stop push button of Make BCH/TECHNIQUE or equivalent complete all as specified and directed.

Supply and fixing in replacement Steel wire rope for EOT crane 12mm dia 6x36 constn for heavy duty for lifting load confirming to IS 2266 complete all as specified and directed.

Supply only Gear oil for EOT cranes confirming to IS:335:1965 complete all as specified and directed.

Supply only Grease for lubrication complete all as specified and directed.

Supply and fixing Cable flexible PVC insulated copper conductor multi stranded 06 Sqmm 04 core complete all as specified and directed. Make - Havells , Plaza

Material and labour for Taking down the HOT crane from the Steel structure, dismantling complete HOT crane capacity 5/3 ton replacing the worn out Gears and reassembling the Crane reinstalling the crane to steel structure and testing for smooth working complete all as specified and directed.

Material and labour for taking out the unserviceable LT motor from EOT crane capacity 5/3 ton for rewinding and rewinding with existing gauge of wire complete .Installing & testing for smooth working complete all as specified and directed.

Material and labour for taking out the unserviceable Hoist drive motor from EOT crane capacity 5/3 ton for rewinding and rewinding with existing gauge of wire complete .Installing & testing for smooth working complete all as specified and directed.

Material and labour for taking out the unserviceable CT motor from EOT crane capacity 5/3 ton for rewinding and rewinding with existing gauge of wire complete .Installing & testing for smooth working complete all as specified and directed.

Material and labour for taking out the unserviceable breake shoe drum from EOT crane capacity 5/3 ton and Supply & Fix replace Installing & testing for smooth working complete all as specified and directed.

Material and labour for taking out the unserviceable breake shoe leather from EOT crane capacity 5/3 ton for replace installing & testing for smooth working complete all as specified.

Material and labour for taking out the unserviceable transformer from EOT crane capacity 5/3 ton for rewinding and rewinding with existing gauge of wire complete .Installing & testing for smooth working complete all as specified and directed.

Supply and fixing in replacement MCB 4P 40A 415 V of Make Seimens or equivalent complete all as specified and directed.

Supply and fixing in replacement limit switch of Make BCH/TECHNIQUE or equivalent complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth ,and getting out in soft/loose sil for laying if GI pipe etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Supply and fix common burnt clay building bricks Sub class B designation 75 complete all as specified and directed.

Supply and fix GI tubing light grade with all fitting laid in trenches , road or wall for cable protection of size 50 mm bore complete all as specified and directed.

Supply , laying and testing PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 4 Core complete all as specified and directed.

Fixing in repairs for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Fixing in repairs for Copper strip 20 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fixing in replacement Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fixing in replacement Copper strip 25 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M & L PCC (1:3:6) type B-1 using 20 mm graded stone aggregate filling in post holes foundation ,surface channel sand drains and other similar work all as specified and directed

Supply and fixing in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

R K ENTERPRISES (BID ID -3084822)

DUGGAL CONSTRUCTION CO (BID ID -3075894)

AGGARWAL ENGINEERING CO (BID ID -3089243)

satpal and brothers (BID ID -3095596)