SPECIAL REPAIR TO BLDG NO E-105 TO E-112 AT VEH COY UNDER GE NARANGI

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.11 sqm but n exceeding 0.18 sqm in vertical surface such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

S&F for glazed ceramic tiles coloured of size 375x250x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters not exceeding 1.50Sqm (without taking off shutters from the frames) complete all as specified.

All as per item No 5 here in before but area of each shutter exceeding 1.50 Sqm but not exceeding 4 Sqm complete all as specified.

S&F Pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

S&F Pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made 35mm thick glazed and skeleton shutter open rebated and prepared to receive with sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter complete all as specified.

M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified..

M&L for preparation of old wood or wood base materials of any description over 10 cm width or girth, not otherwise specially described and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified..

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelaminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelaminated sheet, complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain coulur PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain coour PVC sheets for top rail, lock rail and bottom rail on either side and as gap inset for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F for 200mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified .

All as per item No 15 here in before but 150mm complete all as specified.

S&F 125mm size of aluminium handles, cast type anodised complete all as specified .

S&F for MS butt hinges 100mm size, medium weight cold rolled mild steel, and fixed complete all as specified ..

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified complete all as specified.

M & L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work complete all as specified .

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified.

Supplying and fixing of pressed steel window fabricated out of cold reduced low carbon steel sheet of designation CR2, grade D as per IS 513 :2008 including following components / specification complete all as specified and as directed. (i) Two leaf glazed shutter & two leaf gauzed shutter (mosquito proofed) with provision of 450mm max fixed light window. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 2.00 Sqm. (iii) Pressed steel window frame double rebate. (iv) Guard bar of 12 mm MS Square bars @ 150 mm(maximum) C/C(vertical spacing ) throughout outer frame to outer frame. (v) MS box hinge, stay, latch, handle, tower bolt & flat iron as per drawing. (vi) Flat iron for hold fasts and fillets fixing wire mesh. (vii) All section made of CRLCS sheet, outer frames of size 115 mm x 40 mm (1.25 mm thick), mullion/transoms of size 115 mm x 50 mm (1.25 mm thick), size / shape of all section as specified in drawing. (viii) Shutter frame (outer) shall be of size 50 mm x 23 mm ( 1.00 mm thick ) and Shutter frame (centre/middle) shall be of size 50 mm x 23 mm (1.00 mm thick). (ix) Rest all as specified in drawing no CESZ/2015/TD/019 Sheet no 1R/3, 2R/3 & 3R1/3 complete all as specified.

Supplying and fixing of pressed steel window fabricated out of cold reduced low carbon steel sheet of designation CR2, grade D as per IS 513 :2008 including following components / specification complete all as specified and as directed. (i) Top Hung gauzed (fly proofing) shutter and bottom portion fixed glazed . (ii) Opening of windows not exceeding 0.90 Sqm. (iii) Pressed steel window frame shall be single rebate. (iv) Guard bar of 12 mm MS Square bars @ 150 mm(maximum) C/C(vertical spacing ) throughout outer frame to outer frame. (v) MS box hinge , stay, latch, handle, tower bolt & flat iron as per drawing. (vi) Flat iron for hold fasts and fillets fixing wire mesh. (vii) All section made of CRLCS sheet 1.25 mm thickness for outer frames/ mullion/ transoms and 1.00 mm thickness for shutter frame and size / shape of all section as specified in drawing. (viii) Outer frame shall be of size 65 mm x 40 mm & Shutter frame (outer) shall be of size 50 mm x 23 mm. (ix) Rest all as specified in drawing no CESZ/2015/TD/019 Sheet no 1R/3 ,2R/3 & 3R1/3. Note for items Nos 22 & 23: 1. While supplying, steel windows shall have one shop coat of anticorrosive paint (Red oxide zinc chrome primer). 2. PCC for hold fasts/filling under frames, glass and stainless steel wire mesh shall be measured and paid against respective items of BOQ and all other item as shown on drawings shall be included in quoted rate.

Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as directed.

S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified.

S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Material & labour for Plain Cement Concrete M-15(Nominal Mix) using 12.5 mm graded stone aggregate as in filling of hollow portion of pressed steel frames complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. removing rubbish off the premises complete all as specified.

M & L for brick work with sub class B bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for half brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/cement mud plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc removing rubbish off the premises complete all as specified.

M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified..

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement with using WPC @3% by the weight of cement ( WPC shall be measured and paid separately) complete all as specified and directed.

M & L for rendering 5mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified.

Supply only approved integral water proofing compound.

M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over white cement based wall care putty (minimum 1.5mm thick), complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of acrylic exterior paint ( 1st quality) over white cement based wall care putty (minimum 1.5mm thick), complete all as specified and as directed.

Preparation of newly plastered surface of ceiling and M&L for applying three coats of white wash complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete including removing rubbish off the premises complete all as specified..

M&L for 75mm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement, laid in panels n exceeding 3 sqm each and filling joints with the mixture of bitumen and sand in the proportion(1:3) by weight, complete all as specified & directed.

M & L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L PCC 1:3:6 type C2 ( using 40mm graded stone aggregate) as in surface channel and drain finished with using extra cement complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded all complete including removing rubbish off the premises complete all as specified.

S & F of 18 to 20 mm thick green marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in coloured cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work including rounding of exposed edges of marble over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for cover slab complete including removing rubbish off the premises complete all as specified.

M&L Precast RCC 1:2:4 type B1 cover slab using 20mm graded stone aggregate with plain fair faces incl. chamfers, weathering and setting in CM 1:6 including form work complete all as specified.

M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl. cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

Demolition of plain cement concrete unreinforced of any description and in any position not other wise specifically provided for complete including removing rubbish off the premises complete all as specified.

M&L for two coat @ 1.5Kg/Sqm/Coat (minimum) of two component acrylic modified cementitious coating for water proofing and protective coat on walls beams & floors of sunken portion complete all as specified and as directed.

M&L for pasting 200 micron thick polythene film with the help of adhesives over the treated surface of sunken portion complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc complete all as specified and as directed. .

M&L for PCC 1:5:10 type D2 (using 40mm graded stone aggregate) as in sunken floor complete all as specified and as directed..

M & L for 25mm thick PCC 1:2:4 type BO (using 12.50mm graded stone aggregate) as in flooring for receiving rendering of sunken portion complete.

M&L for 32mm dia GI Pipe medium grade as in spout of sunken floor 450mm long complete all as specified.

Taking up or down 15mm dia steel water tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified.

Supply, laying, connecting and testing GI tubing, medium grade, 15mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

Taking up or down 20 mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply, laying, connecting and testing GI tubing, medium grade, 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F in repairs angle valve 15mm bore, cast copper alloy, chromium plated , fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

Dismantling PVC/cement water tank not exceeding 500 ltrs capacity complete all as specified and as directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Litre capacity, closed top, cylindrical, hoisted and fixed in position complete all as specified and directed.

S&F 20 mm dia ball valves, high pressure of epoxy coated aluminium rod and high density plastic ball complete screwed for iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 20mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union all as directed.

Supply & Fixing 15mm Bore bib tap cast copper alloy chromium plated fancy type with capstan heads, screw down screwed for iron pipe or for brass ferrule and fixed, in repair complete all as specified and as directed.

S&F 40mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.

S&F in repair 15mm bore dia of chromium plated concealed stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repair chromium plated shower rose 125mm size complete all as specified and as directed.

Supply and fixing in repairs kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 900mm x900mm x250mm complete all as specified and as directed. Make : Blue Star, Prayag, silver shine

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and directed..

S&F in repairs Soap dish holder. Make: Jaguar, Model No: ACN-1131N or equivalent model from Kohlar/Hindware

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white, ISI marked, with integral foot rests complete including provision of lean concrete bedding with PCC 1:4:8 type D-2 using 40mm graded stone aggregate and making good disturb floor complete all as specified and directed.

S & F in repairs for 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and as directed.

S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats (Minimum weight 300gm) complete all as specified and as directed.

S & F in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish, including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe all as directed. Make : Blue Star, Prayag, silver shine

Dismantling PVC drain pipes any size and in any position including all fitting complete all as specified and directed..

S&F for 75mm PVC (SWR)pipes single socketed in any length with rubber ring joints, laid in wall complete all as specified and directed..

S&F for PVC (SWR)bends any radius of 75mm bore complete all as specified and directed.

S&F for (SWR) junction single(single T)equal provided with access door 75mm bore

S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed..

Preparation of old plastered surfaces of ceiling and applying M&L for one coat of white wash complete all as specified and directed.

M&L for Complete removal of existing treatment of plastered surfaces of wall, and applying white cement based wall care putty (minimum 1.5mm thick) and preparation of surface with alkali resistant priming paint and applying two coats of distemper oil emulsion, complete all as specified and as directed.

Preparation of old external plastered surfaces of wall after complete removal of existing treatment and M&L for applying two coats of exterior emulsion paint over white cement based wall care putty (minimum 1.5mm thick) all as specified and directed

S&F in repair mild steel PVC coated coloured 25 mm dia drapery rods for curtains including decorative end holders and brackets (wall to wall or flush to wall) for securing curtain rod, complete all as specified and directed .

Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including suitable size of stove enamelled steel conduit pipe (medium grade) including necessary accessories like bends, tees, elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly and also including sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top cover complete all as specified for One light/exhaust fan/fan point/bell push point controlled by one, one way switch .

All as per item No 92.00 above but for one 3 pin socket outlet 5 Amps on same board along with other suitable switches.

All as per item No 92.00 above but for one 3 pin socket outlet 5 Amps, on independent board.

All as per item No 92.00 above but one light point controlled by 02, two way switch on independent board.

All as per item No 92.00 here-in-before but using 2.5 sqmm PVC FRLS ( including earth wire) insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing bell push, flush type one way 240 Volts 5 Amps all as specified.

Supply and fixing call bell ding dong ,electric, 240 Volts, single pole type ding dong complete all as specified and directed

Supply and fixing switch piano, 5 Amp, flush type, single pole, one way 230 volts complete all as specified and directed.

Supply and fixing switch piano, 5 Amp, flush type, single pole, two way 230 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3/5 pin, 5 Amps, flush type complete all as specified and directed.

S & F switch socket combination 2 in 1, 3/5 pin, 5 Amps, flush type complete all as specified and directed.

S & F switch socket combination 2 in 1, 3/5 pin, 5 and 15 Amps, flush type complete all as specified and directed.

S & F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S & F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F decorative hexagonal bulk head with LED luminaire 10 Watt , 6000 K with IP 66 protection complete . Make Havells Cat No HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/Philips/CG

Supply and fixing electronic stepped type electronic fan regulator , two module size flush type on the existing phenolic laminated sheet complete all as specified and directed .

Supply and fixing wall mounted LED box type fitting, 1 x 20 watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver light fittings 20 watt fixed to wall with two Nos PVC block of suitable size and connection complete all as specified and directed. Make : Havells /Philips/CG/Bajaj.

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-42 protection, isolated neutral bar, insulated copper busbar minimum 100 Amps rating, suitable for mounting MCB complete all as specified and directed by Engr-in-charge.

Supply and fixing of MCB 6 to 32 Amps SP "C" Curve complete all as specified and directed.

Supply and fixing in repair of MCCB VTPN DB 4 way vertical type single door,IP-43 protection, isolated neutral bar, insulated busbar assembly including MCCB's 125 Amps ,415 Volts 4 Pole , breaking capacity 16 KA complete all as specified and directed by Engr-in-charge

Supply & fixing of MCB TPN 63 Amps 'C' Series 10 KA 415 volts complete all as specified/directed.

Supply & fixing of MCB SPN 40 to 63 Amps 'C' Series 10 KA 240 volts complete all as specified/directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of size 4 mm (upto 7.50m length)as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execution and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

M & L for sub main wiring with two single core4Sqmm PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC medium grade conduit pipe of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc. including 4Sqmm PVC insulated unsheathed single core solid copper conductor earth wire including taking out old unserviceable cable complete all as specified and directed Note: Two run of single core cable and one run earth wire and conduit pipe will be measured as one length.

Supply & fixing of RCCBs, double pole 40 Amps, 100 mA, 'C' curve marked fixing in DBs complete all as specified/directed.

M/s DAS AND CO

M/S M.S. ENTERPRISE

M/S RAJ RANI BUILDERS

VENUS TRADING CORPORATION

KAMAKHYA CONSTRUCTION AND BUILDERS

PK ENGINEERING

M/s KRISHNA CONSTRUCTIONS