Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.5 L+₹2.9 L (7.60%)Rejected-Finance | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹41.3 L+₹3.7 L (9.85%)Rejected-Finance 107 1F TOLLYGUNGE ROAD KOLKATA 700026 | KOLKATA | KOLKATA | WEST BENGAL | 700026 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹43.6 L+₹6.0 L (15.9%)Rejected-Finance TIORKHALI MAHESHGANJ NADIA | NADIA | NADIA | WEST BENGAL | 790804 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹44.7 L+₹7.1 L (18.8%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8088/B/E8
2022_MES_552476_1
GE/ALP (8088B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
210 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹70,000
Yes
17 Dec 2022
16 Sept 2022
15 Oct 2022
16 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of Brickwork including all quoins,arches,pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles built in cement mortar. complete all as specified and as directed.
Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.
Taking up or down 15mm steel water tubing and connections and removal. complete all as specified and as directed.
Taking up or down 20mm steel water tubing and connections and removal. complete all as specified and as directed.
Taking up or down 25mm steel water tubing and connections and removal. complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building)
Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., and removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Material and labour for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and complete all as specified and as directed..
Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick work built in cement mortar (1:4) Complete all as specified and as directed by the Engr-in-Charge.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering 15 mm thick, in cement mortatr (1:4), on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.
Material and labour for preparation of new plastered surface and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and as directed.
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of the tiles laid over and including 15mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and as directed .
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) for backing coat complete all as specified and as directed .
Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for Non-Skid ceramic coloured tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster for backing coat in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar (1:3) to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and as directed.
Supply and fixing 15mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and as directed.
Supply and fixing 20mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and as directed.
Supply and fixing 25mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and as directed.
Supply and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and as directed.
Supply and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and as directed.
Supply and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and as directed.
Supply and fixing in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair 15mm bore Brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Brass CP angular stopcock with crutch or butterfly handle complete all as specified and as directed .
Supply and fixing in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, 32mm brass CP waste coupling complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge..
Supply and fixing in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge.
Material and labour for PCC (1:5:10) Type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and as directed by Engineer-in-charge.
Material and labour 25mm thick PCC (:2:4) Type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
Material and labour for water proofing treatment to sunken floor by applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1:5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) (upto 12 storey high building) (Make :- Fosroc/Elantas beck/Kunal conchem)
Supply and fixing CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed by Engineer-in-charge.
Supply and fixing CI (Spun) bend with door of 100mm bore complete all as specified and as directed by Engineer-in-charge.
Supply and fixing CI (Spun) branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge.
Supply and fixing CI (Spun) 'T' of 100mm bore complete all as specified and as directed by Engineer-in-charge.
Supply and fixing CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in repair wash down water closet (pedestal pattern), white including PVC white water closet seat heavy duty closed pattern with flat bottom and cover and mild steel CP hinnging device and connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in repair PVC white water closet seat heavy duty closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and as directed.
Supply and fixing in repair CP hand shower (faucet) with one meter flexible tube 15mm dia with wall hook complete all as specified and as directed.
Supply and fixing in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and as directed.
Supply and fixing in repair wash hand basin mixture Brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and as directed.
Supply and fixing in repair 15mm bore brass spindle pluging and screwing to fittings complete all as specified and as directed.
Supply and fixing in repair CP knob head pluging and screwing to fittings complete all as specified and as directed.
Supply and fixing in repair 15mm bore GI short piece pluging of 30cm long and screwing to fittings complete all as specified and as directed.
Supply and fixing in repair 20mm bore GI short piece pluging of 30cm long and screwing to fittings complete all as specified and as directed.
Supply and fixing in repair ball valve including nessesary fittings fixed to existing flushing cistern complete all as specified and as directed.
Supply and fixing in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and as directed.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed Make Prayag or equivalent.
Supply and fixing in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and as directed Make Prayag or equivalent.
Supply and fixing in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed.
Supply and fixing in repairs 1mm thick of stainless steel kitchen plate rack of size 750mm x 900mm including all fixing arrangement complete all as specified and as directed.
Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms). complete all as specified and as directed.
Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15mm in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed.
Supply and fixing in repair powder coated aluminum window/ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper , aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx50mmx1.55mm and shutter frame shall be 40mmx20mmx1.55mm after and including dismantling of old aluminium ventilator complete all as specified and as directed by the Engr-in-Charge. upto 12 storied bldg Note : 1 No Glazed shutter 1 No Gauged shutter and aluminium grill shall constitube one unit.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge upto 12 storied bldg.
Supply and fixing solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing and specified upto 12 storied bldg .
Supply and fixing factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.upto 12 storied bldg.
Supply and fixing for 100mm size stainless steel butt hinges medium weight, complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed
TOTCO
S.M.CONSTRUCTIONS
SHEIKH ENTERPRISE
UNITED ENGINEERS
PRABIR TRADERS
DEB AND COMPANY
SOMANI BUILDERS
ARJUN DAS VALECHA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .