Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹12,519
Closing Date
8 Sept 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-4
Providing new 11kV C&R Panel at 66/11kV National College Substations pertaining to Operation Division HSR Layout in the jurisdiction of Transmission (Operation) South Circle, Bengaluru on Total turnkey basis
KPTCL/2024-25/EL/WORK_INDENT2151/CALL-3
KPTCL/2024-25/EL/WORK_INDENT2151/CALL-3
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission And Mantainance Circle BMAZ South Bengaluru
13 documents required · 13 mandatory
Should have carried out erection of One 110kV bay work on Total Turnkey or Partial Turnkey basis having atleast one number of C&R Panel which shall be in satisfactory service prior to date of submission of the Bid.
Should have carried out erection of One power transformer replacement work, which shall be in satisfactory service prior to date of submission of the Bid
Should have carried out work of erection of one Control & Relay Panel on Total Turnkey or Partial Turnkey basis, which shall be in satisfactory service prior to date of submission of the Bid
Bidder shall have adequate knowledge of Sub-stations and Transmission lines design procedures including quality control and shall have infrastructure and erection facilities and capacity to execute the works
The Bidder should posses valid Super Grade Electrical Contractor License issued by the Government of Karnataka as on the date of Bid Submission. In addition, the bidder should have the following qualifying requirement (Technical).
Bidders are requested to furnish the self-declaration stating the above and upload the same along with the other documents in the relevant field in the e-procurement portal, failing which the offer is liable to be rejected
Bidder shall be financially sound. Bidder shall submit audited financial reports for last five financial years preceding the date of bid submission.
Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last five financial years ending on March or December as the case may be, shall not be less than 1.5 times of amount put to tender
For assessing the Financial Capability of the Bidder, balance Works on hand (including that of his consortium members who are extending financial support with KPTCL and other commitments of the Bidder will be taken into account. In computing the same, such of those works of KPTCL entrusted to the Bidder and where the percentage of financial progress is more than 50%, the same shall not be reckoned while assessing the Financial Capability of the Bidder concerned. For NON-KPTCL works, the value of the pending portion of the works on hand will be reckoned
Bidder company is having various wings / Divisions and the turnover of each of the wing / Division are audited separately and have separate resources, in such events the turnover and commitments of that wing / Division which deals with KPTCL will be taken into account for assessing the financial capability
While computing the balance works on hand pertaining to KPTCL, only those works where the financial progress is less than 50% shall be reckoned on the entire award amount.
The Bidder shall stand disqualified if the total value of Works on hand including Contract against subject tender if awarded exceeds 2 times the MAAT (minimum average annual turnover).
₹500
₹12,519
22 Aug 2025
22 Aug 2025
10 Sept 2025
29 Aug 2025
Tender for Providing new 11kV C&R Panel at 66/11kV National College Substations pertaining to Operation Division HSR Layout in the jurisdiction of Transmission Operation South Circle, Bengaluru on Total turnkey basis
C and R panel 11 kV Twin feeder line type-1L provision for two feeders to be made in one panel. C&R panel should be suitable for integrating with existing Substation Automation System (SAS) of SIEMENS...
10 core 2.5 sq. mm. copper control cable
4 Core 4 sq.mm. copper Control cable for extending DC source to Panel
4 Core 6 sq.mm Copper Control cable for extending CT secondary from Switchgear to Feeder control and Relay panel and Bus PT voltage
Unloading, moving to the work spot, erection, alignment, leveling, fixing, welding etc to the existing cable duct, indoor 11kV MEI make, MCVCB, 31.5kA switch gear Panel
Laying of 10 core 2.5 sq. mm. copper control cable from equipment to C&R panel
Laying of 4 core 4sqmm copper control cable from equipment to C&R panel
Laying of 4 core 6sqmm copper control cable from equipment to C&R panel
Errection C & R panel 11 kV Twin feeder type-1L(M/s. SIEMENS make). Alignment and fixing properly to foundation base including movement from point of unloading to the point of errection
Wiring & assisting MRT staff, testing of Control panel
Testing and commissioning.
For C and R Panel
Wiring & assisting MRT staff, testing of 11kV Switchgear panel
Testing and commissioning.
For single 11kV Panel Indoor type/Kiosk
Extending the C&R panel Grounding with 50 X 6 mm G.I. Flat & connecting equipment to earth mat to the nearest grounding
Extending the EHV switchgear grounding 75X12 G.I Flat to the nearest grounding
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
technical specification- c& r panel.docx
Tender Document • 0.16 MB
tehcomsheet--c&r panel replacement-mdb.xls
Tender Document • 0.28 MB
ecc--mdb c&r panel replacement.doc
Tender Document • 0.10 MB
gcc--mdb c&r panel replacement.doc
Tender Document • 0.14 MB
ifb--mdb c&r panel replacement.doc
Tender Document • 0.10 MB
itb--mdb c&r panel replacement.doc
Tender Document • 0.12 MB
nit Call-1.docx
Tender Document • 0.07 MB
scc--mdb c&r panel replacement.doc
Tender Document • 0.11 MB
annexure new.docx
Others - annexure • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .