PERODICAL SERVICES TO CERTAIN BLDGS OF MD/ OTM ACCN IN CHUNABHATTI AREA UNDER AGE B/R-I AND REPAIR TO ROOF SHEETS, FALSE CEILING, HARDSTANDING, TILING ETC AT AGE B/R-I AND AGE B/R-II OFFICE AT NAVAL STATION KARANJA

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L 20 mm thick(average) polymer modified ready mix cement based plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L 15 mm thick(average) polymer modified ready mix cement based plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

M&L 5 mm thick (average) polymer modified ready mix cement based plaster on ceiling surfaces finished even and smooth complete all as specified and directed.

Complete removal of existing treatment of walls/roof projections including Facia cornices etc of painted surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate girt to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and as directed

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M & L for new or old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clan water & allow to dry. Fill visible cracks/ joints by chemistic crack seal caulking compound & allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 02 coats of chemistik PDS-50 (WB high build anti caronatin coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc complete all as per specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note: Primer and emmulsion to be carried out through air less spray machine (Mechanical means only)

Material & Labour for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over complete all as specified and directed. Note: Emulsion to be carried out through air less spray machine (Mechanical means)

M&L Preparation of newly plastered surfaces and applying two coats of oil emulsion distemper on walls over a coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls complete all as specified and directed. Note: Oil bound distemper to be carried out through air less spray machine (Mechanical means only)

M/L Preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of old surfaces of ceilings including cornices, etc and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls including cornices, pillasters, etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old painted surfaces and applying one coat of cement base paint on walls complete all as specified and directed.

M&L Preparation of old concrete/Asbestos/Cement/Plaster surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or previously untreated surfaces of wall and applying one coats of Camouflange Antifungal) paint for any height of building with necessary scaffolding with safety measures all specified and directed.

M&L for preparation of old Interlocking/floor/hardstanding surface of any descriptions and any position & applying one coats of terra cotta exterior grade paint on floor/tiles etc complete all as specified and directed.

Demolition of cement concrete of any description in any position not otherwise specifically provided complete all as specified and directed.

M&L Cement concrete 1:1.5:3 type A0 using 12.5 mm graded stone aggregate as in repairs work in small patches and narrow width, incl necessary formwork and scaffolding in wall, column, slab, beam, chajaa and similar works for any height of building wth necessary safety measures complete all as specified and directed.

M & L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessory scaffolding etc for plants / vegetation of size 0-20 cm girth complete all as specified and directed for buildings upto and including 4 storeys.

S&F in repair 600x200mm Metallic/acrilic board fixing with SS screws (3 inch) to the existing wall, making good to the surface (Any height) incl bldg No & name complete all as specified and directed.(Eg: BLDG NO P-0015)

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and directed.

S&F for PVC False ceiling consisting of 600 mm x 600 mm, 12 mm thick prelaminated self design PVC sheet of density 600 kg/Cum solid PVC panel including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GE flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

M&L prepration of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chromate primer complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L PCC 1:4:8 type D2, using (40 mm graded agg) 75 mm thick as in sub base of flooring complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm hickompacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; ® 13122C Providing and, complete all as specified and directed.

M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around tile complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring complete all as specified and directed.

S&F Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 10mm thick without relevant PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. a complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 40mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work complete all as specified and directed.

M&L Forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A', as in 100 mm thikness of concrete slab complete all as specified and directed.

M&L Forming Contraction(Dummy) joints 65 mm deep x 10 mm wide, filled with Grade 'A' sealing compound complete all as specified and directed.

M&L Granite(of any type)tiles 20mm thick as in skirting/dado and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed.

M&L exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment as per 15 1237-1980 (Reaffaired in 2006) design as CHITRA type (samples approved by Engr-in-Charge) over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed.

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M & L Virified Ceramic tiles (dark shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.

M & L Virified Ceramic tiles (dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed.

S&F Mild steel hand rails, half round or other steel section or core for hand-rail straight portion. Drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

BALAJI TRADERS

M/s S.D Construction Co

A R Construction Company

LAXMI ENTERPRISES

Everest Construction

Mahadev Enterprises