REPAIR TO ROOF, CEILING, WALL PANELING, TILLING, SANITARY FITTINGS IN OTM ACCN AT OLD AIR FIELD UNDER GE 970 EWS

Amount

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed.

S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed.

M&L preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. iron surfaces as in roofings exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 2mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with and including dismantling roof sheet (PVC), any gauge, thickness complete all as specified.

S&F 12mm thick gypsum board for ceiling fixed with GI Powder coated snap grid 605mm x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling wall and ceiling baords (fibre, pulp,insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

M&L 6 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for fixed in ceiling, flat or sloped surfaces with and including dismantling wall and ceiling baords (fibre, pulp,insulation etc) complete all as specified and directed.

M&L second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or borads exc 6 Sq.cm & n.exc 13 Sq.cm complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in cement mortar 1:6 using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.

M&L preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper over a coat of wall care putty with rubbing or smoothing of surface upto ture finish over a coat of water base primer complete all as specified and directed.

M&L preparing new or old plastered or unplastered surfaces and applying two coats of cement based paint over a coat of water base primer complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed by Engr-in-Charge.

S&F in repair figured glass 4.00 mm thick, pin head type and glazing with oil putty in squares, rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed.

Hacking out old broken glass (any thickness, size, quality or description from wooden frames glazed with putty or fixed with beads complete all as specified and as directed and directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair waste pipe for kitchen snik of size 32/40mm dia upto 900 mm length complete all as specified and directed.

S&Fin repair towel rail 600 mm long of PTMT fixed with and incl chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed and directed.

S&F in repair PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed including taking out old one.

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed.

S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one complete all as specified and as directed and directed.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one complete all as specified and as directed and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed.

M&L non-skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed.

M&L non-skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed.

All as per Srl Item No.31,32 & 33 here-in-before but on skirting over with and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed.

M&L glazed ceramic coloured as required pattern (dark & light shade combination) tiles in 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including over 15mm thick screed bed in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed.

All as per Srl item No.37 here-in-before but on skirting over with and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceed 10 cm girth complete all as specified and directed.

M&L Lagging to pipes used in internal water supply (internal dia of pipe 15mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed.

M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed.

S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one complete all as specified and as directed and directed.

S&F in repair 15 mm bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one complete all as specified and as directed and directed.

S&F in repair Bib tap 15 mm standard of PTMT any colour high pressure screwed down, screwed for iron/PVC/UPVC/CPVC or any pipe or for brass ferrule complete all as specified and directed including taking down old one.(Minimum weight 15mm-90gms/20mm125gms) complete all as specified and as directed and directed.

S&F in repair 15 mm Stop valve of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. (Minimum weight 15mm-90gms/ 20mm92gms) complete all as specified and as directed and directed.

S&F in repair brass Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or unionincluding taking down old one complete all as specified and as directed and directed.

S&F in repair CP angle valves (half turn type) conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one complete all as specified and as directed and directed.

S&F in repair Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed including taking down old one complete all as specified and as directed and directed.

S&F in repair 15 mm dia CP Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower complete all as specified and directed. Makes : Prayag or equivalent in approved makes

S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system complete all as specified and directed. Makes : Prayag or equivalent in approved makes

S&F in repair 15 mm dia CP Sink Mixer with regular spout (W/M) (Make : Prayag) complete all as specified and directed.

S&F in repair Vitrous china wash hand basin, white, flat back of size 630mm x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling as suitable complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed..

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one complete all as specified and as directed and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed and directed.

M&L Granite (of any type) tiles, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing complete all as specified and directed. Note :- Screed bed shall be measured and paid separately under respective item

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed and directed.

Dismantling/taking down AC/PVC pipe of any size from wall with cement head joints.up to 110mm dia complete all as specified and as directed and directed.

M&L chequered cement concrete coloured tiles 300mm X300mm and 20-25mm thick confirming to IS -1237 in floor etc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement mortar 1:6 complete all as specified and as directed and directed.

M&L 80 mm thick, M-40 grade machine pressed precast colour concrete paver block in any shape and size as approved confirming to IS 15658-2006 complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and consolidtion as per specified.

Demolition of pressed precast concrete paver block/chequred tile complete and removing the debris out side MD land ass as specified and as directed.

M/S IEE BEE CONSTRUCTIONS

FIRDOUS AHMAD BABA

M/s Bashir Enterprises

M/S GHULAM MOHAMMAD AND CO.

M/S GHULAM HASSAN KUCHAY

M/S maqsood enterprises