Construction of Bullet Proof Watch Tower along with Stabilization of Hill Side at Dam for CISF for Sewa-II Power Station, J and K (CW-435).

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead 1:3:6 or richer mix

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead: In cement mortar

Steel work in built up tubular round, square or rectangular including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing M.S. Sheet in roofing and in walls including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 6mm thick Sheet

Centring and shuttering including strutting, propping etc. and removal of form work for- Retatning walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses, string or laces courses, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 10mm nominal size) (A) Crushed

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) : 25 mm thick

Kota stone slab 25mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Old work (one or more coats)

Finishing walls with water proofing cement paint of required shade: Old work Old work (one or more coats applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Drilling of 32mm dia. Holes for 25mm dia. Steel anchors and 500mm deep into old concrete by way of jack hammer or other suitable equipment

Reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering including strutting, propping etc and removal of form work for.- Foundations, footings, bases of columns

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Labour Rate)

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes. 75 mm diameter

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) (A) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm

Providing and fixing of GI wire crates of 4 mm thick wire making up into cage/mattresses of 150x150 mm mesh.

Boulder filling dry hand packed tightly as in wire crates apron bund ( Wire crate to be measurement Seperaretly)

DARSHAN SINGH