Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
29 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Composites Division
HINDUSTAN AERONAUTICS LIMITED Aerospace Composites Division Marathahalli Post, Bangalore - 560 037
The enquiry is for manufacturing and supply of Air Intake duct composite part for as per the drawings and CAD models supplied by HAL. Tool Design, Manufacturing, tool raw Materials procurement are under vendor scope. Part drawing, Part CAD model and part raw material will be supplied by ACD-HAL
7690
DGM/IMMOS/CATSW/EOI
Works
Helicopter Complex -Composite Mfg Division
₹0
Exempted
29 Jun 2024
30 May 2024
30 May 2024
29 Jun 2024
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post, Bangalore - 560 037 INDIA
TECHNICAL REQUIREMENTS COMPLIANCE
EOI Ref No:DGM/IMMOS/CATSW/EOI
Name of Work: Design and Manufacturing (3D Modelling, 2D-Drafting, NC Programming, NC Machining & Fabrication) of Layup tools and Composite part fabrication and supply of Layup Tools AND Air Intake Part for one of the UAV Programs. (TOOL MATERIAL SUPPLY IS VENDOR SCOPE & PART MATERIAL IS ACD-HAL SCOPE).
Name of the Vendor/Firm
Quotation Ref. No.:
Sl. No. Technical Specifications Vendor compliance Complied/Not Complied)
1 INPUT DATA FROM HAL
Annexure-A: Component 2D drawing in pdf format
2 TOOLING REQUIREMENTS
a All Tool Models should be developed in 3D CAD & 2D drafting using NX or CATIA V5 CAD SOFTWARE.
b This enquiry is for the supply of 3 sets of parts only. For production volume separate PO will be placed.
c Air Intake Duct is an assembly of 3 no's parts (Duct-LH, Duct-RH and LIP at the front) in which the 2 no's ducts are assembled to the Lip part as shown in Fig.2. of SOW
d Approximate dimensions/ sizes of Air Intake Duct assembly are 2.5 Meter length X 0.8 meter width X 0.925 Meter Height and ducts are of 0.286 Meter internal Diameter. Refer all the actual dimensions in the drawing and CAD models provided by the ACD-HAL.
e The lay-up tool design, tool manufacturing shall be the responsibility of vendor. Internal diameter is to be considered as tooling surface or controlled surface for the ducts and External surface or contours to be considered as tooling surface for LIP part. Lay-up tools are to be Designed and fabricated considering these respective surfaces as tooling or control surfaces.
3 PART MANUFACTURING
a Composite prepregs are to be stacked on the contours of the lay-up tool one over the other to achieve the desired thickness. The lay-up stack as per the layup scheme defined in the drawings
b Strict adherence to the cure cycle is requested. Demould the part from the tool deburr the extra resin flashes, sand the part edges for smooth finish and offer the part for inspection.
c The Air Intake Duct parts are to be manufactured as per cure cycles of the composite raw materials (approx cured at 135 degrees Celsius) and process is defined by the ACD-HAL as per the drawings. Strict adherence to the process is requested.
d The ribs are to be the integral part of the hollow serpentine duct and are to be co-cured. These ribs should not be attached as either co-bonding or secondary bonding.
e Supplier is not allowed to deviate from the part manufacturing process. Strict adherence to the process is requested.
a Part Material: Supplier is not allowed to deviate from the part manufacturing process and materials. Part raw material will be supplied by HAL.
b Tool Material: Supplier is allowed to choose the tool material as per the tooling methodology and process adopted. Tool material selected should not affect the part surfaces at curing temperatures and dimensional stability of the part.
5 The air intake assembly to be supplied to ACD-Hal in safely packed condition using a tough container for storage, transportation and handling. Casing/ transportation box should have the suitable handles and rubber cushioned wheels for lifting and safe movements respectively.
6 QUALITY (TOLERANCES & SURFACE FINISH)
a The inner contour tolerances, paint, finish and surface finish of the air intake shall comply as per Annexure - A. Inspection report to be submitted against the surface finish and inner surface contour.The inner surface shall be smooth finish without any visible surface undulation, steps and bumps
b Part quality should comply all the requirements as per the drawings supplied by HAL. Quality tests may include validation through DT and NDT as per the drawing requirements.
c Measure and report the GD&T of tools as per the drawing. Measure & report contour of tool with non contact method.(Laser scanning) Applicable tolerance as called in Annexure - A
d Submit material confirmation certificate for specifications and one set of hard & soft copies of all Original reports/ documents i.e. Inspection reports & certificates etc. as per the Inspection Plan & Drawing.
The duct shall be primed and painted with a coat of MATTE WHITE colour as per the drawing in Annexure-A.
8 For any clarification vendor may approach ACD-HAL.
9 Vendor should have an experience earlier in Design and Manufacturing in similar parts.
10 DELIVERABLES TO ACD-HAL
a Air Intake duct composite part in assembled and safely packed condition.
b Inspection reports for CMM (for contour deviations) and Internal surface finish (Ra value), duly co-ordinate by ACD-HAL Inspection for Tooling and Part separately.
c Tool drawings and Tool CAD Models soft copies in CD format and Tools manufactured for realizing the Air Intake duct composite part.
a The vendor shall interact closely with ACD- HAL to arrive at a mutually agreed design for manufacturing the tools and part before submission of the proposal against RFQ. Based on the scrutiny of the proposal submitted, PQ will be floated for the manufacturing of Air Intake duct composite part.
b Budgetary quote to be submitted for Tooling and Part Manufacturing separately with a breakup indicating the costs involved to realize and supply of the parts.
GENERAL NOTES FOR PART FABRICATION
1.THE TOLERANCE ON PLY ANGLES IS +/- 2 DEGREE.
2.THE TOLERANCE ON THICKNESS IS +8% TO -4% IN MONOLITHIC AREA.
3. TOLERANCE ON RADIUS +/- 1 MM.
4. PROFILE TOLERANCE THROUGHOUT THE AIR DUCT SURFACE IS +/- 0.2 MM.
5. THE TOLERANCE ON THICKNESS FOR CO-CURED STIFFENERS WITH ADHESIVE INTERLAY IS +/-10%.
6. AT ANY LAYER JOINT OVERLAPS ARE NOT PERMITTED.GAPS SHALL NOT EXCEED 2 MM.CARE MUST BE TAKEN TO KEEP THIS DIMENSION TO A MINIMUM.
7.PLIES OF SAME ORIENTATION SEPERATED BY LESS THAN FOUR PLIES OF ANY ORIENTATION MUST BE STAGGERED BY ATLEAST 50 MM.
8.APPLY 2 COATS OF EPOXY PROIMER (DTD 5567A OR EQUIVALENT ) OVER ENTIRE SURFACE OF THE ASSEMBLYFINISH THICKNESS TOLERANCE (MATT WHITE COLOUR)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
01EOINotification.pdf
TENDER_DOCUMENT • 0.48 MB
Appendix3Potendtialsupplerinformation.pdf
TENDER_DOCUMENT • 0.55 MB
Appendix6Declarationcertificate.pdf
TENDER_DOCUMENT • 0.30 MB
Appendix4FirmInformationNInstructions.pdf
TENDER_DOCUMENT • 0.32 MB
Appendix1PQC.pdf
TENDER_DOCUMENT • 0.48 MB
Appendix2Scopeofwork.pdf
TENDER_DOCUMENT • 0.50 MB
Appendix5Termsandconditions.pdf
TENDER_DOCUMENT • 0.34 MB
Appendix8InstructionsforsubmissionofEOI.pdf
TENDER_DOCUMENT • 0.31 MB
Appendix9DigitalSignatuteGuidelines.pdf
TENDER_DOCUMENT • 2.17 MB
Appendix10NDAEproc.pdf
TENDER_DOCUMENT • 0.43 MB
Appendix7Checklist.pdf
TENDER_DOCUMENT • 0.48 MB
Annexure11VENDORCOMPLIANCEPOINTSMOD.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .