Face lifting by way of Painting Distempering, Polishing and other allied works of Guest House No. 4 at Gupkar Srinagar

Amount

Removing old damaged emulsion paint/synthetic enamal paint and the like by using paint remover scrapping, sand papering and preparing the surface smooth incl; necessary repairs to scratches etc complete

Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade icluding preparing the smooth

Wall painting with plastic emulsion paint (One or more coats) of approved brand and manufacture to give an even shade icluding preparing the smooth

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new surface including sand papering and knotting complete, inluding two or more coats of ready mixed primer.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including sand papering and knotting (One or more coats) Old work

Varnishing with varnish of approved brand and manufacture. Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish.

Varnishing with varnish of approved brand and manufacture. One or more coats of glue sizing with copal varnish.

Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade. Old work (one or more coats applied @ 2.20 kg/10sqm)

Painting with Excel paint (Terricota) of approved brand and manufacture of required color to give an even shade at all places (one or more coats)

Removing old damaged shingle (wooden)roofing including stacking of serviceable material and disposal of unserviceable material within a 50 metre lead as directed.

Providing and fixing precoated galvanised iron High rib profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.High rib

M/s FAROOQ AHMAD ZARGER

NASEER AHMAD KHAN