Supply and installation of furniture for rest rooms, lounge area etc and conference table

Providing and placing in position centre table of Godrej make Model SPLENDA WOODEN CENTRE TABLE Overall Size : Width : 120cm Depth : 60cm Height : 37.8cm TABLE METERIALS & SIZE :TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO All complete as per the approval and directions of Engineer in Charge.

Providing and placing in position Single Bed of Godrej Make Ace/Pearl with following specifications as :- 1) Overall Size : Length - 2060.0 mm Width - 1119.0 mm Height - 900.0 mm 2) Material :Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition Panels & Plinths are made of 25 mm Thick Prelaminated Particle Board. Head board & Tail board is made of 25 mm thick Prelaminated Particle board. All the exposed edges are edge banded with 2.0mm thick PVC edge. Side board & mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. 3) Construction : Knock Down construction. Packets : 1 Bed in 3 packets. Finish : 25 mm thick Prelaminated Particle Board is in maple shade. 18 mm thick Prelaminated Particle Board is in maple shade. Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10).

Providing and placing in position PU foam mattress for single bed of Godrej (Model-Hero) make of size (78 x 36 x05) INCH and made of 02 layer PU foam (Density@23kg/cum) (top layer 50mm and seconnd layer 75mm) both side quilted (16mm thick), all complete as per the approval and directions of Engineer in Charge.

Providing and placing in position wooden corner table Splenda model of Godrej make of size 53 X 45 X 45 cm (W x D x H) of Solid veneer MDF table top with 18 mm and solid rubber wood understructure with tapered legs in Cappuccino shade all complete as per the approval and directions of Engineer in Charge.

Providing and placing in position Utopia King Bed of Godrej make of Size : Length : 206cm Width : 190.5cm Bed Height : 42cm Bed with Headboard Height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc

Providing and placing in position UTOPIA BED SIDE TABLE of Godrej make of size Width : 45cm, Depth : 40cm Height : 45cm,Finish Color - Natural Brown, Number of Drawers - 1, Number of Shelves - 1,Net Weight (kg) - 25, Primary Material - Solid Wood Sheeshamall complete as per the approval and directions of Engineer in charge.

Providing and placing in position mattress for double bed of Godrej make (Hero model) of size 78 x72 x 05inch)(L x W x T) and made of 02 layer PU foam (Density@23kg/cum) (top layer 50mm and second layer 75mm) both side quilted (16mm thick), all complete as per the approval and directions of Engineer in Charge.

Proving and placing in position Single Seater Sofa of Godrej make Model PISA OVER ALL DIMENSION :-Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap

Providing and placing in position Metallic Optimizers/ Mobile storage system with following specification : Overall Dimensions of OPTIMIZER SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 3200mm(W)x1200mm(D)x1980mm(H) INCLUDING CHANNELS . The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513.Each body shall have a main unit plus add on units (1,2,3,4,5). Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns.Shelf construction made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD.Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame CRCA sheet 2 mmthk conforming to IS:513. The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling 'C' tyep plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. y. Each movable body also has an understructure with 4 nos. of antifriction ball bearings for rolling on channels. The twin moving body, i.e. TM, has 4 nos. of bearing fitted horizontally to restrict the lateral movement of the body on rail while the single moving body, i.e. SL, body has 2 nos. of a special anti-tilt bearing assembly fitted to the understructure which not only restricts lateral movement but also prevents SL from toppling. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit, i.e. SL body. It gets locked into the channels when all the units are brought together, and the lock is turned. The Recess handle lock is of Godrej make & placed at a height of 940mm from ground level. The locking stiffener is made of 1.2 mm thk conforming to IS:513.Hinged doors have Recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolts.The nuts & bolts are galvanized / blackodized / Zn Plated. Label Holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted

Providing and placing of personal lockers of Godrej (Gain Pro), Overall size of 1 Door PLU - Lkr (Base) shall be 380mm(W)x450mm(D)x1830mm(H). DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock). DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) . Stackability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation . Hat shelf and Hanging rod below hat shelf .