Supplying and fixing of water supply fittings and misc. pipe repairing work for residential building, service buildings, and welfare buildings at Bhallar Township of Wani North Area.

Amount

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 50 mm nominal bore.

Providing and fixing brass bib cock 15 mm nominal bore of approved quality.

Providing and fixing ball valve (brass) of approved quality, high or low pressure with plastic floats: 25 mm nominal bore.

Providing and fixing brass stop cock 15 mm nominal bore of approved quality.

Providing and fixing C.P. brass shower rose with 15 or 20mm inlet: 100 mm diameter.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm dia. C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Flexible pipe 32 mm dia.

Providing and fixing 600 x 450 mm beveled edge mirror of superior class (of approved quality) complete with 6mm thick hard board sheet ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making the walls etc. Internal work - Exposed on wall: 15 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making the walls etc. Internal work - Exposed on wall: 20 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making the walls etc. Internal work - Exposed on wall: 25 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making the walls etc. Internal work - Exposed on wall: 50 mm nominal bore.

Providing and fixing 100mm dia. sand cast iron grating for gully trap.

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete 10 litres capacity - White.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Demolishing cement concrete manually / by mechanical means including disposal of materials within 50m lead as per direction of Engineer-in-charge: 1:3:6 or richer mix.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means foundation trenches, drain not exceeding 1.5 m in width as well as 10 sqm on plan including dressing of sides and ramming of bottom, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (All kinds of soils).

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m.

Providing and fixing C.I. sluice valve (with cap) complete with nuts, bolts, rubber insertions etc. (the tail piece if required will be paid separately) : 50mm diameter Class I.

Providing and fixing C.I. sluice valve (with cap) complete with nuts, bolts, rubber insertions etc. (the tail piece if required will be paid separately) : 150mm diameter Class I.

Providing and fixing C.I. sluice valve (with cap) complete with nuts, bolts, rubber insertions etc. (the tail piece if required will be paid separately) : 100mm diameter Class I.

Providing and fixing C.I. sluice valve (with cap) complete with nuts, bolts, rubber insertions etc. (the tail piece if required will be paid separately) : 200mm diameter Class I.

Supplying pig lead at site of work.

Providing and fixing G.I. pipes complete with G.I. trenching and refilling etc. fittings including External work 50mm dia

Providing and fixing G.I. pipes complete with G.I. trenching and refilling etc. fittings including External work 80mm dia

Supplying of water supply fittings of ISI mark .(GI Socket), 15mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Socket), 20mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Socket), 25mm dia. as and when required.

Supplying of water supply fittings of ISI mark (GI Socket), 50mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Socket), 80mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Elbow),15mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Elbow),20mm dia. as and when required.

Supplying of water supply fittings of ISI mark (GI Elbow),25mm dia. as and when required.

Supplying of water supply fittings of ISI mark .(GI Elbow),50mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI Elbow),80mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI Tee),15mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI Tee),20mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI Tee),25mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI Tee),50mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI Tee),80mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Tee 80mm x 50mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Tee 50mm x 25mm dia.)as and when required.

Supplyingof water supply fittings of ISI mark (GI reducing Tee 25mm x15mm dia.)as and when required.

Supplying of water supply fittings of ISI mark (GI reducing Elbow 25mm x 15mm dia.)as and when required.

Supplying of water supply fittings of ISI mark (GI reducing Elbow 25mm x 20mm dia.) as and when required.

Supplying of water supply fittings of ISI mark (GI reducing Elbow 20mm x 15mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Elbow 50mmx25mm dia.)as and when required.

Supplying and fixing of water supply fittings of ISI mark (GI reducing Socket 25mmx15mm dia.)as and when required.

Supplying of water supply fittings of ISI mark (GI reducing Socket 25mmx20mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Socket 20mmx15mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Socket 50mmx25mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Socket 80mmx50mm dia.)as and when required.

Supplying of water supply fittings of ISI mark .(GI reducing Socket 50mmx40mm dia.)as and when required.

Supplying of water supply fittings of ISI specification(GI Nipple)15mm dia. x 50mm length as and when required.

Supplying and fixing of water supply fittings of ISI specification .(GI Nipple)15mm dia. x 100mm length.as and when required.

Supplying of water supply fittings of ISI specification .(GI Nipple)15mm dia. x 150mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)20mm dia. x 50mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)20mm dia. x 100mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)20mm dia. x 150mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)25mm dia. x 50mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)25mm dia. x 100mm length.as and when required.

Supplying of water supply fittings of ISI specification (GI Nipple)25mm dia. x 150mm length.as and when required.

Supplying of water supply fittings of ISI mark .(GI Union) 15mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI Union) 20mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI Union) 25mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI flange) 50mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI flange) 80mm dia.as and when required.

Supplying of water supply fittings of ISI mark (GI flange) 100mm dia.as and when required.

Supplying of water supply fittings of ISI mark .(GI flange) 150mm dia.as and when required.

Supplying of water supply fittings of ISI mark (PVC cistern bend of 40mm dia, 750mm long).as and when required.

Supplying of water supply fittings of ISI mark (CP brass pillar cock of approved make 15mm dia.)as and when required.

Supplying of rubber packing for flange (5mm thick)

Supplying of 20mm bibcock brass jumper washer (1packet containing 100nos).

Supplying of pvc pillarcock washer(1packet containing 100nos)

Supplying of pvc bibcock washer(1packet containing 100nos)

Supplying of pvc washer for flexible connecting pipe(1packet containing 100nos)

Supplying of water tank connector of 25mm dia.

Supply of brass waste coupling for wash basin 32mm dia.

Supply of brass waste coupling for wash basin 65mm dia.

Supply of GI bend pipe 50mm dia.

Supplying of plug 15mm dia.

Supplying of plug 20mm dia.

Supplying of plug 25mm dia.

Supplying of gland packing rope of dia.12mm.

Supplying of gland packing rope of dia.10mm.

Supplying of gland packing rope of dia.15mm.

Supplying of gland packing rope of dia.8mm.

Supplying of CI Sluice Valve of ISI mark of 80mm dia.

Supplying of hacksaw blade (100mm)

Supplying of leather for foot valve of pump

Supplying of nuts and bolts (Size 5/8" x 3") full thread

Supplying of nuts and bolts (Size 1/2" x 3") full thread

Supplying of mechanical joint for 100m dia CI pipe

Supplying of mechanical joint for 150m dia CI pipe

Supplying of mechanical joint for 200m dia CI pipe

Supplying of 100mm dia. CI pipe

Supplying of 150mm dia. CI pipe

Supplying of cutting blade for cutter grinder

Supplying of M-Seal

Supplying of 15mm gun metal gate valve

Supplying of 20mm gun metal gate valve

Supplying of PVC tank cover of approved quality.

Supplying of 80mm G.I.bend of approved quality.

Providing and fixing 15mm diameter PVC Aqua kraft type of approved make superjet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :(1 cement: 4 fine sand)12x4sidesx1.43x0.60=41.18 sqm Say 50.00 sqm

Total impact of GST for the purpose of CTC

Nitikesh Damodhar Tagselwar

M/s V. R. Lade

MORNINGSTAR INNOVATIONS