REPAIR/MAINT OF STORAGE SHEDS WORKS SHOP AND CONNECTED WORK IN AGE B/R-II UNDER GE BABINA

Amount

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.

M&L Rendering 15 mm thick CM (1:4) on concrete/brick surfaces on wall etc and finishing the surface even and smooth without using extra cement complete all as specified and as directed..

M&L Rendering 15 mm thick CM (1:6) on concrete/brick surfaces on wall of cement plaster and finishing the surface even and smooth without using extra cement complete all as specified and as directed..

M&L prepation of newly plastered surface of wall and applying three coat of white wash complete all as specified and as directed..

M & L for complete removal of existing treatment from surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface all as specified and as directed by the Engineer-in-Charge

M & L for applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete.

M&L Brick work with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.

Dismantling timber scantling , framed /un framed work of 40 sq. cm and over in section in any position complete all as specified and as directed.

M and L for Second class hard-wood (SAL wood) in scantlings, wrought timber frame and fixed in position (As a truss member or in Rafter in roofing work) etc complete all as specified and as directed.

M and L for Preparing surfaces of wood and applying wood based paint on new or old, of any description and girth, not otherwise described and treated with Creosote oil complete all as specified and as directed.

Dismantling structural steel work including doors, gates and truss etc. complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed..

S and F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S and F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

M&L one coat synthetic enamel paint on old steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed..

S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 4mm dia GI adjusting level fixed to roof slabs/truss complete all as specified and as directed.

M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.

M and L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge.

Dismantling asbestos cement , galvalume , fiber sheet ( Plain , corrugated , semi corrugated ) and as directed by engineer in charge.

S&F 6 mm thick Non asbestos cement sheet corrugated /semi corrugated in roofs fixed with L /J type hooks and washers etc complete all as specified and directed . Note:- work will executed upto 15m height.

All as per item No 24 above but Except sheet and ditto Note:- work will executed upto 15m height.

S&F 6 mm thick non Asbestos cement RIDGE plain angular and fixed with suitable fixing arrangements etc complete and as directed . Note:- work will executed upto 15m height.

S&F Pre-painted galvatume aluminum zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note:- work will executed upto 15m height.

S & F Pre-painted galvatume aluminum zinc coating AZ-150, GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge.Note:- work will executed upto 15m height.

M and L in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull but gear operated type with bevel gear box and crank handle and all as directed by engineer in charge.

M and L for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed..

M and L in repair Ball bearing for rolling shutters and complete all as specified and as directed..

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.

M/L for 40mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and as directed. Finished even & smooth with using extra cement complete all as specified and as directed.

M &l for 38mm wide and 3mm thick glass dividing strips complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed.

Sunken waterproofing Treatment by SmartCare Or equivalent in following steps :-(i). Surface Preparation: Minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare SRP or equivalent ii). Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare SRP or equivalent (iii). Supplying & grouting the gaps around the pipe / inserts with SmartCare General Purpose Grout, a non-shrink cementitious waterproof grout. The “Nahani” trap, etc is to be fitted securely in the same manner & the gaps around it to be grouted with non-shrink Grout or equivalent (iv) Supplying and applying High performance hybrid polyurea or equivalent elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane and all as specified and as directed. Make- Aisan paint/ fosroc/Pidilite. This shall conform the following standards: ASTM C 109 - 1999 18, ASTM C 1107, Grade C complete as per instructions. Providing 3 coats of SmartCare PU Magnum and 40-50 gms polyester fleece sandwiched between 1st and 2nd coats completely up to the top edge of the pipe etc. complete as per manufacturer's instructions. Make- Aisan paint/ fosroc/Pidilite

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour for colour printed glazed ceramic tiles (Premium quality) (300X200mm) X 6mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1 : 4) complete all as specified and as directed by the Engr-in-Charge.

Material and Labour for PCC 1:4:8 type D-2 using 40 mm stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L, 50mm thick sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified

M&L 80 mm thick machine pressed precast concrete interlocking paver block any shape & size local make available confirming to IS 15658-2006 of 60mm thickness, M-40 grade with grey cement & no pigment complete all as specified and as directed.

VIJAY BUILDERS

M/S M S Constructions

M/s Ravi Traders

DEVENDRA ENTERPRISES

M/S RAJ KUMAR SINGH

Ms Vinay constructions

Ayush Enterprises

M/s KGN Builders