SPECIAL REPAIR TO BLDG NO. P-204 AT OLD AIR FIELD MIL STN UNDER GE 970 EWS

Amount

Taking down chowkats or frames with shutters (without taking of shutters from the frame) of any description alongwith fittings, area not exc 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) of any description alongwith fittings, area exc 1.50 Sqm but not exc 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm, made of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet reinforced with MS square tube, fixed in opening at site, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F factory made pressed steel frames for doors, section of frame 125mm x 60mm, made out of 1.25mm thick MS black sheet with one or more rebates including necessary fixing of lugs, hinges, lock strike plate, etc. and including bottom of each chowkats to be welding with 02 Nos angle iron of size 25x25x3mm with 10cm projecting on either side, supplied and fixed at site, complete all as specified and directed.

All as per Srl item No.5.00 here-in-above but size of frame 105x60mm.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in filling to back and sides of chowkat pressed steel frames, complete all as specified and directed.

S&F factory made box type mild steel windows with side hung glazed shutters with chowkats with glazing bars to receive glass and other side of window wire mesh shutters to receive wire mesh or wire guage, dovetailed or welded and steel peg stay with and including necessary welding, riveting, tower bolts, handles, hold fast, stainless steel wire cloth 0.36mm dia and 4mm thick ordinary pin/ head glazing with oil putty and hinges as per drawing No. CESZ/TD-1018/2011 sheet No. 1/3, complete all as specified and directed. Note :- Guard bars shall be measured and paid for separately under respective item of this BOQ.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in hold fasts and bed blocks etc including necessary formwork, complete all as specified and directed.

M&L for mild steel flat iron as in hold fast for doors, window frames and chowkat etc, cut to length or drilled holes and fixed with screws etc, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F framed work such as grills & gates, gratings with ends of bars shouldered or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work, confirming to Fe-290 E-165, complete all as specified and directed.

M&L for rolled mild steel work as in joist, channel, angle or tee sections, fixed independently without connecting plates, etc., confirming to Fe-410-W Gde E- 250) quality A, complete all as specified and directed.

S&F 1mm thick plain, black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut), complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling in and mass concrete including necessary formwork, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered, rounded fitted with mitred beads for securing glass etc., size of members as specified in SSR Part-I Section 8 Clause 8.20 (a), fixed to chowkat at site, complete all as specified and directed.

S&F 35mm thick factory made out of 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm to 15mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm, fixed with stainless steel screws or wire staples, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty, exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm, fixed in floor, complete all as specified and directed.

S&F 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F 100mm size butt hinge, medium weight, stainless steel, ISI marked, fixed with SS screws, complete all as specified and directed.

S&F 125mm size butt hinge, medium weight, cold rolled, mild steel, ISI marked, fixed with screws or welded to steel frame, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections, complete all as specified and directed.

S&F 150mm size, extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed.

S&F in repair/ replacement18/19mm thick block board, grade-II quality, interior grade, commercial type, fixed with screws to timber framework as in shelves, partitions and lining with and including stainless steel cleats 02 Nos each side, complete all as specified and directed.

S&F 18/19mm thick block board, grade-II quality, interior grade, commercial type, fixed with screws to timber framework as in cupboards shutters, complete all as specified and directed.

S&F 0.90mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F 2nd class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or brads, section exceeding 3.0 Sqcm but not exceeding 6.0 Sqcm with and including two coats of French polish, complete all as specified and directed.

S&F hasp and staple, safety type of size 100mm, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in replacement 25mm dia curtain rod, stainless fixed with screw, brackets, endball/ endcap etc., complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, complete all as specified and directed.

M&L for second class hard wood, wrought, fixed as in scantling or framed work, complete all as specified and directed.

Refixing of timber scantling obtained from dismantling under item No. 34.00 here-in-before, complete all as specified and directed.

M&L for preparation of new/ old or previously treated wooden surfaces or articles of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel/ iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of new/ old wooden surfaces or articles of any description, over 10cm width and girth and treated with creosote, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or paving, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for machine cut kota stone slab flooring not less than 20mm thick, size not less than 0.034 Sqm of each slab, laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finish, as in floor, complete all as specified and directed.

All as per Srl item No. 46.00 above but on vertical surfaces such as skirting, dados, steps, pillars etc. and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive stone slab, complete all as specified and directed.

Dismantiling of floor, hearth or wall tiling including cement mortar bedding (not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles not less than 8mm thick, 1st quality, area of each exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 49.00 above but on vertical surfaces such as skirting etc. and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive stone slab, complete all as specified and directed.

M&L for non skid ceramic coloured tiles not less than 8mm thick, 1st quality (square/ rectangular), area of each exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Size 350x250x7mm / 450x350x7mm / 450x300x7-8mm) as on verticle surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for not less than 20mm thick granite (of any type) work (table rubbed and olished) as in steps, jambs, pillars, window-cills, cooking plat forms and the like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:4 and including dismantiling of old existing unserviceable tiles/ granite slabs including cement mortar bedding, removing serviceable tiles/ slabs to store and rubbish off the premises, complete all as specified and directed.

Rounding/ moulding to edges of kota stone slabs, marble stones, granite stone slabs on one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for formwork to rought finished surfaces of concrete of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20mm graded crushed stone aggregate) as in manholes, drain cover slabs and similar work with plain faces, set in cement mortar 1:4, complete all as specified and directed.

M&L for plain cement concrete 1:1.5:3 type A-0 (using 12.5mm graded crushed stone aggregate) as under bottom of sunken portion floor, finished even and smooth, complete all as specified and directed.

M&L for plain cement concrete 1:7:12 type F-2 (using bricks coarse aggregate) as in filling in sunk floors, complete all as specified and directed.

M&L for treatment of sunken portion of floor with and including 10mm thick cement plaster in ratio 1:3 mixed with liquid WPC @200ml per bag of cement, when concrete surface is greeen. Over after dry of plaster surface two coats of industrial bitumen 85/25 laid @1.20Kg/ Sqm including cleaning of surface over 200 micron PVC films, laid when bitumen is hot, complete all as specified and directed. Note : Rates for WPC, bitumen and PVC films shall be deemed to be included in the quoted rates.

M&L for 32mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or celing or laid in floor complete with all fittings (such as bends, elbow, tee, sockets, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces or stone masonry, finished the surface even and smooth without using extra cement including taking down of existing plaster and including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 with using of liquid WPC @ 200 ml per bag of cement, as on fair faces of brick wall or concrete surfaces or stone masonry of 2 or 3 storey buildings, finished the surface even and smooth without using extra cement including taking down of existing plaster and including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. Note : Rates for WPC shall be deemed to be included in the quoted rates.

M&L for 10mm thick rendering in cement mortar 1:3 on ceiling or landing, finished the surface even and smooth without using extra cement including taking down of existing plaster of any description, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:6 including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved to any radius, half thick wall, built in cement mortar 1:4 including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces or stone masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 with using of liquid WPC @ 200 ml per bag of cement, as on fair faces of brick wall or concrete surfaces or stone masonary, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note : Rates for WPC shall be deemed to be included in the quoted rates.

M&L for preparation of new/ old plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper over one coat of wall primer and including 1 to 2mm thick wall care white putty with rubbing or smoothing of surface upto true finish, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new/ old plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

S&F 12mm thick gypsum board as in ceiling fixed with GI powder coated snap grid of size 605x605mm frame work including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fasteners complete inclduing dismantling of ceiling boards of any description or any thickness incl cover fillets, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, cladding to walls etc, fixed with self tapping screws and including dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, ridges, hips, cladding to walls, fixed with self tapping screws and including dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, eaves boards, complete all as specifed and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10cm girth in brick wall, complete all as specifed and directed.

M&L for 15mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or ceiling or laid in floor complete with all fittings and fixtures and including taking up or down existing water tubing and connections, complete all as specified and directed.

M&L for 20mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or ceiling or laid in floor complete with all fittings and fixtures and including taking up or down existing water tubing and connections, complete all as specified and directed.

M&L for lagging to 20mm bore GI pipe used in internal water supply or plumbing allround with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS-9842, complete all as specified and directed.

Refixing of 15mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or ceiling or laid in floor complete with all fittings and fixtures and including taking up or down existing water tubing and connections, complete all as specified and directed.

Refixing of 20mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or ceiling or laid in floor complete with all fittings and fixtures and including taking up or down existing water tubing and connections, complete all as specified and directed.

S&F in replacement vitreous china wash hand basin of size 550x400mm, white, oval shape counter top and and including brackets, 32mm dia PTMT waste cuppling and 32mm dia PVC waste pipe 90cm long and inlet and outlet connections, complete all as specifed and directed.

S&F in replacement vitreous china squatting pan, ‘Orissa pattern' of size size 630x450mm, white with integral foot rests (excluding flushing cistern and flush pipe) and including CI trap of suitable size, front and back inlet including provision of cement concrete bedding and making good to disturbed floor, complete all as specified and directed.

S&F in replacement 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, complete all as specified and directed.

S&F in replacement sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm and including PTMT waste coupling and PVC waster pipe of suitable size, complete all as specified and directed.

S&F in replacement of 15mm size CP wall mixer telephonic with crutch (provision for hand shower) and complete set of hand shower and fixed, complete all as specified and directed.

S&F in replacement of 15mm size CP central hole basin mixer without pop-up based system, complete all as specified and directed.

S&F in replacement of 15mm size CP sink mixer with regular spout (W/M), complete all as specified and directed.

S&F in replacement of 15mm dia bib tap, fancy type, cast copper alloy with chromium plated crutch or butterfly handle, screwed down, scewed for iron pipes or for brass ferrule, complete all as specified and directed.

S&F in replacement chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to 15mm bore pipe or union, complete all as specified and directed.

S&F in replacement of CP angle valve (half turn type) concealed type, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, scewed for 15mm bore iron pipes or for brass ferrule, complete all as specified and directed.

S&F in replacement of CP stop valve (half turn type) concealed type, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, scewed for 15mm bore iron pipes or for brass ferrule, complete all as specified and directed.

S&F in replacement PVC (SWR) multi floor trap 75mm to 110mm dia, plain with grating including jointing with solvent cement and PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.

S&F in replacement 15mm dia PVC connection pipe, 600mm long with PTMT nuts of superior quality, complete all as specified and directed.

S&F bevelled edged looking mirror of size 600x450mm, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including taking old one, complete all as specified and directed.

S&F in replacement towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190 gms), complete all as specified and directed.

S&F in replacement glass corner shelf assembly, fancy type of suitable size, complete all as specified and directed.

S&F in replacement stainless steel kitchen rack made of 1mm thick sheet of size 900mm x 900mm x 250mm, fixed with SS screws, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on wall with MS suitable clamps including taking down old existing pipes, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on wall with MS suitable clamps including taking down old existing pipes, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius, with or without access door including taking down old one, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius, with or without access door including taking down old one, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door including taking down old one, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door including taking down old one, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl including taking down old one, complete all as specified and directed.

S&F in replacement 1000 ltrs PVC rotational moulded polyethylene water storage tank, tripple layered (cylindrical vertical with closed top), hoisted and fixed in position and including ball brass valve (minimum weight 45 gram), high pressure, with polythene float and flynut complete screwed for 20mm bore GI pipe and brass ferrule and fixed, complete all as specified and directed.

S&F in replacement 500 ltrs PVC rotational moulded polyethylene water storage tank, tripple layered (cylindrical vertical with closed top), hoisted and fixed in position and including ball brass valve (minimum weight 45 gram), high pressure, with polythene float and flynut complete screwed for 20mm bore GI pipe and brass ferrule and fixed, complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, for shaft, wells, cessptic, manholes, laying of cables, erection of poles, stays etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing surplus excavated soil to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for 100mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars and including cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested and demolition or taking up existing pipes of any description, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars and including cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested and demolition or taking up existing pipes of any description, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded crushed stone aggregate) smooth finished, and reforming benching as required, for 100mm bore RCC pipe, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded crushed stone aggregate) smooth finished, and reforming benching as required, for 150mm bore RCC pipe, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 with using of liquid WPC @ 200 ml per bag of cement, as on fair faces of brick wall or concrete surfaces or stone masonary, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- The cost of WPC shall be deemed to be included in the rate quoted.

M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manholes, septic tanks, drain covers etc. including necessary fornwork, setting in cement mortar 1:4, complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs or mud stops, lintels upto 1.5m clear span, copings and the like including weathering, slightly rounded or chamfered angles/ edges and throating including necessary formwork, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork, complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches, ceiling rose, pendents, regulators, sockets, lamp holders etc. and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down unserviceable main switch, DB including MCCBs including wooden/ GI/ MS sheet board etc of any description and removing from site and also making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down unserviceable copper/ aluminium sub main wiring of any size/ core/ type complete including conduits/ casing & caping etc and removing from site and also making good disturbed surface to match with existing surface, complete all as specified and directed.

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 Sqmm size (Phase and neutral) alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 Sqmm size through and including 20mm dia (medium grade) rigid non metalllic PVC concealed conduit terminated in and including modular metal flush box, readily available (Having wall thickness not less than 1.22mm for boxes upto a size of 200mmx300mm and beyond that the wall thickness shall not less than 1.63mm) concealed type for fixing of switches sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduity piping in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following :- Note :- Colour coding shall be followed in point wiring

All as per Ser item No. 123.00 here-in-above but for one light point controlled by one switch.

All as per Ser item No. 123.00 here-in-above but for one call bell point.

All as per Ser item No. 123.00 here-in-above but for one light point controlled by two way switch.

All as per Ser item No. 123.00 here-in-above but for one ceiling/ exhaust fan point controlled by one switch

All as per Ser item No. 123.00 here-in-above but for one 3/5 Pin, 5 Amp socket outlet on independent board by using 2.5 Sqmm wire, complete all as specified and directed.

All as per Ser item No. 123.00 here-in-above but for one 3/5 Pin, 5 Amp socket outlet on same board , complete all as specified and directed.

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 Sqmm size (Phase and neutral) alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 Sqmm size through and including 20mm dia (medium grade) rigid non metalllic PVC concealed conduit terminated in and including modular metal flush box, readily available (Having wall thickness not less than 1.22mm for boxes upto a size of 200mmx300mm and beyond that the wall thickness shall not less than 1.63mm) concealed type for fixing of switches sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduity piping in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following :- Note :- Colour coding shall be followed in point wiring

M&L for submain wiring with four runs of single core 6.0 Sqmm, FRLSH copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non-metallic rigid PVC conduit of suitable size, medium grade with all accessories such as tees, elbows, junction boxes etc., as required at site, fixed on wall along with one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion, complete all as specified and directed. Notes :- (a) Phase should be red/ yellow/ blue, neutral should be black and earthing wire should be green in colour. (b) Four runs of cable single core 6 Sqmm and one run of single core cable 2.5 Sqmm for earth including conduit will be measured and paid as one unit length.

M&L for submain wiring with two runs of single core 6.0 Sqmm, FRLSH copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non-metallic rigid PVC conduit of suitable size, medium grade with all accessories such as tees, elbows, junction boxes etc., as required at site, fixed on wall along with one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion, complete all as specified and directed. Notes :- (a) Phase should be red/ yellow/ blue, neutral should be black and earthing wire should be green in colour. (b) Two runs of cable single core 6 Sqmm, one run of single core cable 2.5 Sqmm for earth including conduit will be measured and paid as one unit length.

S&F Modular switch 2 way 6 Amp, 1 module, complete all as specified and directed.

S&F Modular switch 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F Modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F Modular socket 1 way 6 Amp, 2 module, 2/3 pin, complete all as specified and directed.

S&F Modular socket 1 way 16 Amp, 2 module, 2/3 pin, complete all as specified and directed.

S&F Modular fan regulator, 120 Watt, 1 module, complete all as specified and directed.

S&F Modular bell push, 1 way, 6 Amp, 1 module, complete all as specified and directed.

S&F Modular white cover plate with frame 1 module, complete all as specified and directed.

S&F Modular white cover plate with frame 2 module, complete all as specified and directed.

S&F Modular white cover plate with frame 3 module, complete all as specified and directed.

S&F Modular white cover plate with frame 4 module, complete all as specified and directed.

S&F Modular white cover plate with frame 6 module, complete all as specified and directed.

S&F Modular white cover plate with frame 8 module, complete all as specified and directed.

S&F in replacement ceiling rose, 2/ 3 terminals, size 65x50mm, surface bakelite, 240 Volts, complete all specified and directed.

S&F of vertical TPN DB type 4 way as per IEC 61439-3 suitable for surface mounting with 250 Amp copper busbar for each phase, 2 neutral bar, 2 Earth bar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved pan assembly for ease of installation, reversible door for IP 43&IP 54 DB's with provision of FP MCCB as incomer and SP/TP MCB's as outgoing, complete all as specified and directed. Note :- MCCB and MCB are measured separately under relevant items of BOQ.

S&F TPN DB 4 way, 415 volt with 200 Amp rated bus bar double door type modular type, complete all as specified and directed.

S&F MCB DB SPN 12 way, 230 volt with 200 Amp rated bus bar double door type modular type, complete all as specified and directed.

S&F MCCB TP 100 Amps, 415 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F MCB TP 63 Amps, 415 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F MCB SPN 40 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F MCB SPN 06 to 32 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F energy efficient surface mounted LED luminaire 22 Watt 4' long, with acrylic cover complete with all accessories including necessary two core of copper wire for connection from ceiling rose to connector of approx length 0.75 mtr including taking down old, complete all as specified and directed.

S&F energy efficient surface mounted LED luminaire 10 Watt 2' long, with acrylic cover complete with all accessories including necessary two core of copper wire for connection from ceiling rose to connector of approx length 0.75 mtr including taking down old, complete all as specified and directed.

S&F LED lamp 1 x 9/11 Watt including lamp holder B22 including taking down old, complete all as specified and directed.

S&F in replacement security LED light luminaire 1x60 Watt, pressure die cast housing with toughened glass, 240 Volt, efficiency-Min 100 lumen/ Watt, IP-66, 4KV internal surge protection, THD<10%, PF>0.95, CCT-5700K, High power SMD LEDs and including cable for connection from ceiling rose with 1.5 Sqmm 3 core PVC insulated stranded copper conductor (FRLS) cable including GI bracket medium grade bent to shape etc including taking down old, complete all as specified and directed.

S&F energy meter enclosure, suitable for fixing of 06 Nos energy meters including locking arrangement, complete all as specified and directed. Note :- Energy meter will be provided by the MES free for fixing only.

Taking down of existing serviceable energy meter after repair of wiring, refixing of energy meter alongwith encloser connected from TPN to sub DB, complete all as specified and directed. Note :- Encloser shall be measured separately.

S&F in repair MS black conduit 25mm dia medium grade including all fittings/ fixtures, junction boxes etc fixed on wall, ceiling/ roof/ structure etc for hanger lighting, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers, GI light grade protection pipe of 15mm bore upto 7.5 mtr and GI watering pipe of 20mm bore and RCC cover with funnel wire mesh, excavation in any type of soil, PCC pit, RCC cover, charcoal, salt, complete all as shown in electrical plate No. 5 of SSR Part-I and including earth test point upto pannel board and testing on completion including dismantling old, complete all as specified and directed.

Supply, laying, jointing commissioning & testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, LT 1100 volts grade, cross sectional area 70 Sqmm 3.5 Core including taking down old, complete all as specified and directed. Note :- (a) Excavation, earth work, sand cushioning and PCC cable covers/ bricks cover will be measured and paid separately under respective items of this BOQ.

M&L for dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M&L for sub class 'B' brick, old size, as in covering protection to the eletric cable, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to length of brick, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc., complete all as specified and directed.

Fixing only ceiling fans AC single phase 230/ 240 Volt of size 1200mm sweep, 5 star rated, complete all as specified and directed.

M&L for repair including taking down from site and taking away to workshop of ceiling fan complete of any size 1200/ 1400mm sweep including rewinding with recommended size of copper alongwith 2.5 MFD capacitor and by providing complete painting of approved color and also changing bushes/ bearing etc., complete all as specified and directed.

M&L for repair including taking down from site and taking away to workshop of exhaust fan complete of any size 200/240/300mm including rewinding with recommended size of copper alongwith 2.5 MFD capacitor and by providing complete painting approved color and also changing bushes/ bearing etc., complete all as specified and directed.

S&F in replacement call bell, ding dong type, single phase, 230/240 Volts, complete all as specified and directed.

Fixing only exhaust fan AC single phase 230/ 240 Volt of size 300mm sweep, 5 star rated with louvers and shutters PVC made, complete all as specified and directed.

S&F in replacement gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 50mm bore and including cutting and connecting up with existing line by using sockets, bends etc. as required at site, complete all as specified and directed.

S&F in replacement gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20mm bore and including cutting and connecting up with existing line by using sockets, bends etc. as required at site, complete all as specified and directed.

Taking down GI pipe of size 50mm dia., complete all as specified and directed.

M&L for 50mm bore GI water tubing, medium grade with and including short lengths, fixed to wall or celing or laid in floor complete with all fittings and fixtures and including taking up or down existing water tubing and connections, complete all as specified and directed.

M&L for lagging to 50mm bore GI pipe used in internal water supply or plumbing allround with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS-9842, complete all as specified and directed.

S&F stop valve, cast copper alloy with crutch or butterfly handle, screwed down, scewed for 20mm bore iron pipes or for brass ferrule including taking down old, complete all as specified and directed.

S&F stop valve, cast copper alloy with crutch or butterfly handle, screwed down, scewed for 50mm bore iron pipes or for brass ferrule including taking down old, complete all as specified and directed.

Notes :- An amount of Rs. 2,27,021.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S BASHIR AND SONS (BID ID -3184646)

M/S GHULAM AHMAD WANI (BID ID -3184859)

M/S GHULAM HASSAN KUCHAY (BID ID -3184287)

SOFI CONSTRUCTIONS (BID ID -3190261)

G N Constructions (BID ID -3190472)

M/S Manzoor and Co (BID ID -3182414)

M/S RATHER CONSTRUCTION CO (BID ID -3184022)

JK BUILDERS AND ENGINEERS (BID ID -3186461)

M/s Bashir Enterprises (BID ID -3190428)

M/S SUHEEL CONSTRUCTIONS (BID ID -3189875)