SPECIAL REPAIRS TO NCEs Md ACCN AT AFS THANJAVUR PH-II

Amount

Demolition of cement concrete (unreinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level complete all as specified and as directed.

Demolition of stone slab and tiles with screed bed/back coat of any description and thickness in floors, wall etc complete all as specified and as directed.

M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm and shall be jointed in neat cement slurry and pointed with coloured cement and pigment over 15mm thick screed bed 1:4 in floor complete all as specified and as directed.

Description all as per srl item No 03 here-in-before but in skirting over backing coat of 10mm thick in cement mortar 1:3 in lieu of 15mm thick screed bed complete all as specified and as directed.

M & L for non skid ceramic coloured tiles, 6 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and shall be jointed in neat cement slurry and pointed coloured cement and pigment over 15mm thick screed bed 1:4 with water proofing liquid as per manufacturer instructions in floor complete all as specified and as directed. Note :- Water proofing liquid will be measured and paid saparately.

M & L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm / 450X 350X 7mm thick as in vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed with colour cement and pigment incl backing coat 10mm thick in cement mortar 1:3 with water proofing liquid as per manufacturer instructions complete all as specified and as directed. Note :- Water proofing liquid will be measured and paid saparately.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in floors fixed with colour cement and pigment over 20mm thick screed 1:4 in floor including dismantling of existing floor tiling of any type, complete all as specified and as directed.

M & L machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over over backing coat of 10mm thick in cement mortar 1:3 including dismantling of existing floor tiling of any type, complete all as specified and as directed.

M & L chequered cement concrete coloured tiles 400x400x20 to 25mm / 300X300X20 to 25mm thick, set jointed and pointed with colour cement and pigment over 20mm thick screed bedin CM (1:4) complete all as specified and as directed.

S & F in repair chromium plated shower roses 125mm incl shower aRM in size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs Vitreous china ware wash hand basin, white, angle back of size 400 X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting stand, etc incl waste pipe and pillar taps 15mm bore, cast copper alloy, with capstan heads,fancy type CP,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern EWC white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe incl 'P' trap PVC (SWR) type complete all as specified and as directed.

S & F in repairs 10 ltrs capacity, PVC valve less, syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repair corner glass shelf 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 30cm long complete all as specified and as directed.

S & F aluminium wardrobe hooks (single) 50mm to 60mm complete all as specified and as directed.

S & F in repair 15mm dia stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair 15mm bore chromium plated fancy type bib taps long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair 15mm chromium plated fancy type two way bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair 15mm chromium plated fancy type angle cock, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connection and fix in position complete all as specified and as directed.

Taking down chowkats / frames without removing shutters area nexc 1.5 complete all as specified and as directed.

Taking down chowkats / frames without removing shutters area exc 1.5 but n.exc 4sqm complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq m each complete all as specified and as directed.

Resecuting, easing and adjusting without taking down Shutters of any description exc 1 sq. m but n exc 2 sq m each complete all as specified and as directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cement in the frame at site as per specification complete all as specified and as directed.

S & F 35mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRMing process of required length (shape & size according to uPVC profile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass/board or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete. The rate includes necessary cutting of existing shelf / addl brick work up to the thickness of the frame to accomdate frame in position.

Description all as per srl item No 30 here-in-before but three track complete all as specified and as directed.

S & F veneered decorative plywood teRMite proof 19 / 20 mm thick, grade 1 (with BWR resin) with decorative face lamination on one face fixed as in cupboard partion complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones putty complete all as specified and as directed.

M & L Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying andpainting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

S & F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F in repairs stain less steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F 2nd class hardwood plain fillets square, rectangular in section n exc 3 Sqcm clean swan, bull nosed, splayed chamfered or rounded on one side edge secured with nails etc complete all as specified and as directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

Description all as per srl item No 40 here-in-before but 100mm long complete all as specified and as directed.

S & F aluminium alloy anodised sliding door bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F aluminium anodised handle, of extruded section fabricated type of size 150mm long complete all as specified and as directed.

Description all as per srl item No 43 here-in-before but 100mm long complete all as specified and as directed.

S & F 100 mm size, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, Type B-21, including fixtures complete all as specified and as directed.

S & F double action spring hinges,125mm mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed.

S & F in repairs double action spring hinges,125mm mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed.

S & F in repair 150 mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

Description all as per srl item No 48 here-in-before but for 100mm long complete all as specified and as directed.

S & F in repair aluminium alloy anodised sliding door bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F in repair aluminium anodised handle, of extruded section fabricated type of size 150mm long complete all as specified and as directed.

Description all as per srl item No 51 here-in-before but 100mm long complete all as specified and as directed.

S & F in repair 100 mm size, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, Type B-21, including fixtures complete all as specified and as directed.

Supply and Fixing of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including taking down existing 15mm bore GI tubing with accessories / specials complete all as specified and as directed.

Description all as per srl item No 54 here-in-before but 20mm bore complete all as specified and as directed.

Description all as per srl item No 54 here-in-before but 25mm bore complete all as specified and as directed.

S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm dia complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls complete all as specified and as directed.

S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down take pipes complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] junction single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair 110mm bore PVC [SWR] vent cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repair 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S & F in repair 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S & F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaes finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L prepartion of new plaster surface of wall and applying two coat of oil bound distemper over a coat of primer over one coat of wall care putty (1mm thick) complete all as specified and as directed.

M & L preparation of new wood surfaces of any description not other wise described not exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L preparation of old wooden surfaces of any description not other wise described not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L complete removal of existing treatment and apply one coat of wall care putty (1mm thick) and two coat of distemper oil emulsion paint on existing wall surface incl a coat of primer complete all as specified and as directed.

M & L complete removal of existing treatment of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified

M & L preparation of old steel Surfaces of any description, n.exc 10cm in width or girth applying one coat of synthetic enamel pait when unconnected with other painting or when painted in a different tint

M & L applying two coats of exterior emulsion paint with anti fungal property (Apex Ultima) any colour code over a coat of exterior grade primer as applicable including preparation of old plaster or concrete wal surfaces all as per manufacturer's instruction complete of height up to 7m with all necessary scaffolding and staging as required at site complete all as specified and as directed.

M & L preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified

M & L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F in repair 19 / 20 mm dia aluminium anodised pipe for curtain rod complete all as specified and as directed.

S & F in repair brackets for srl item No 76 here-in-before complete all as specified and as directed.

M & L for 75mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate for plinth protection fair finished in bays n exc 3m c/c and filling joint with bitumen blown type grage 85/25 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

S & F MS work in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confoRMing to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm bowl size 410mm x 330mm x 160mm incl waist fittings complete all as specified and as directed.

Supply and Fix for kitchen stainless steel plate rack with having partitions in the rack with proper screws & 1x1x0.20cm and removing existing old one complete all as specified and as directed.

Dismantling water tanks 500 Ltrs capacity and removing to store complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

M&L for APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm, 3mm thick reinforced with non woven polyester matt weighing not less than 150 gm/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sq cm, tearing strength of 100Nm, by torch application including minimum 10cm side lap and 15 cm end laps over a coat of bitumen primer @0.20 Kg per Sqm and finishing with solar reflective aluminium paint applied @0.10 Kg per Sqm over bituminous coat complete over 10 MM thick cement plaster 1:4with WPC, including cleaning the cement concrete roof surface free from dirt, dust etc and brushing neat cement slurry @3kg/Sqm incl taking down old water proofing treatment complete all as specified and as directed.

M & L for preparation of old surfaces of any description not other wise described over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

M&L for bitumen blown any grade, applied hot, two coat, to concrete surface at the rate of 1.5kg per sqm per coat including polythene film black 50 micron laid in floor and wall surface of sunken floor etc complete all as specified and as directed.

Supply only water proofing liquid complete all as specified and as directed.

Fabrication and fixing Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, confoRMing to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel' complete all as specified and as directed.

M & L for ATT treating the soil under plinth protection at the rate of 5 litres/sqm of emulsion per square metre of surface area complete all as specified and as directed.

S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

M & L 75mm thick Cement concrete type D - 2,1:4:8 (40mm gradedaggregate) as in sub base complete all as specified and as directed.

S & F UPVC insulated board profile to fill opening for item no 30 and 31 above 6 mm suitablle thickness, fixed as in cupboard partion / shutter complete all as specified and as directed.

S & F modular kitchen cabinet uint with 18mm thick PVC / WPC board water proof and teRMite proof in any colour glossy/matte finish at one side and other side white complete all as specified and as directed.

S&F SS 304 Auto hinges for cup board shutters complete all as specified and as directed.

S&F SS 304 Handles 200 mm long complete all as specified and as directed.

S&F Magnetic catch for cupboard shutter complete all as specified and as directed.

S & F SS 304 cutlery Basket tray of size 17"x20"x4" complete all as specified and as directed.

S & F SS 304 cup and soucer of size 17"x20"x6" complete all as specified and as directed.

S & F SS 304 plain basket of size 17"x20"x8" complete all as specified and as directed.

S & F SS 304 Oil Basket 3 Tier with minimum width of 150 mm complete all as specified and as directed.

S&F 500 mm long SS 304 slider for Basket fixing above complete all as specified and as directed.

SEMBA ELECTRICALS (BID ID -3140491)

VIKAS INFRASTRUCTURE (BID ID -3148576)

S.T.S.CONSTRUCTIONS AGENCIES (BID ID -3148637)