Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.7 CrAdmitted-Finance | -26.55% | ₹1.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.7 Cr+₹3.3 L (1.96%)Admitted-Finance GRAM RAKSHAWARA THANA KARARI TAH MANJHANPUR KAUSHAMBI | KAUSHAMBI | UTTAR PRADESH | 212201 | -25.11% | ₹1.7 Cr+₹3.3 L (1.96%) | L2 | Admitted-Finance |
| 3 | L3₹1.7 Cr+₹5.8 L (3.49%)Admitted-Finance | -23.99% | ₹1.7 Cr+₹5.8 L (3.49%) | L3 | Admitted-Finance |
| 4 | L4₹1.7 Cr+₹6.9 L (4.14%)Admitted-Finance | -23.51% | ₹1.7 Cr+₹6.9 L (4.14%) | L4 | Admitted-Finance |
| 5 | L5₹1.8 Cr+₹8.6 L (5.13%)Admitted-Finance | -22.78% | ₹1.8 Cr+₹8.6 L (5.13%) | L5 | Admitted-Finance |
Tender Value
₹2.3 Cr
EMD Value
₹4.5 L
Closing Date
9 Mar 2026, 1:00 pmClosed
SE PHED CIRCLE BHILWARA
Pur Road Bhilwara
Yojna Kothiya me Pipe nine and new clean jalashay ka kary
2026_PHCJA_538390_5
NIT NO 59to79/2025-26 SE PHED CIRCLE BHILWARA
Open Tender
Civil Works - Water Works
Percentage
270 days
BHILWARA
Please refer Tender documents.
12 documents required · 12 mandatory
₹5,000
EE PHED DN. SHAHPURA
₹4.5 L
Yes
16 Mar 2026
16 Feb 2026
9 Mar 2026
16 Feb 2026
9 Mar 2026
16 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | |||||
| 1.01 | 150 mm | 7,500 | RMT | 2,082 | ₹1,56,15,000 |
| 2Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. | |||||
| 2.01 | HDPE PE-80 PN-6 | - | - | - | - |
| 2.02 | 90 mm dia | 800 | RMT | 306 | ₹2,44,800 |
| 2.03 | 110 mm dia | - | RMT | 463 | - |
| 3Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). All End Flanged | |||||
| 3.01 | Up to 300 mm Diameter | 155 | Kg | 158 | ₹24,490 |
| 4Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | |||||
| 4.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 | - | - | - | - |
stage.html
html • 0.05 MB
technical_960888.pdf
techsummary_960888.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
td63.pdf
Tender Documents • 10.43 MB
BOQ_960888.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .