Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAdmitted-Finance WARD NO 09 MAIN ROAD BURHAR SHAHDOL MADHYA PRADESH 484110 | BURHAR | SHAHDOL | MADHYA PRADESH | 484110 | ₹31.8 L | L1 | Admitted-Finance |
| 2 | L2₹33.9 L+₹2.1 L (6.45%)Admitted-Finance 1ST FLOOR FLAT NO A 104 ANANT EMEGINE SOCIETY PURANA BUS STAND KORBA DISTT KORBA C G 495678 | 495678 | ₹33.9 L+₹2.1 L (6.45%) | L2 | Admitted-Finance |
| 3 | L3₹39.1 L+₹7.3 L (22.9%)Admitted-Finance BHAGWAN NIWAS WARD NO 30 DADARKHURD DADAR NALLA KORBA CG 495677 | KORBA | CHHATTISGARH | 495677 | ₹39.1 L+₹7.3 L (22.9%) | L3 | Admitted-Finance |
| 4 | L4₹50.9 L+₹19.1 L (59.9%)Admitted-Finance 000 SNEH RASHMI BHAWAN MAIN ROAD P O AKALTARA 495552 AKALTARA JANJGIR CHAMPA CHHATTISGARH 495552 | JANJGIR CHAMPA | CHHATTISGARH | 495552 | ₹50.9 L+₹19.1 L (59.9%) | L4 | Admitted-Finance |
| 5 | Rejected-Technical AT SAMALEI VIHAR PANCHGACHHIA PO BARAIPAH | - | - | Rejected-Technical Rejected due to non-compliance of confirmatory documents |
| Sl No | Description | Qty | Unit | m/s bhagwan saran and associates L3 | M/S SATISH GUPTA L1 | VENUS INFRATECH PRIVATE LIMITED L4 | AARNA Constructions L2 |
|---|---|---|---|---|---|---|---|
| 1.00Laying and jointing of MS Pipeline including loading, Unloading, transportation and placement manually (within unit/project), welding of pipes & cutting and fitting of Packing (if jointing by Nut-bolt). (Note:- Measurement of item no. 1 will be done in running mtr irrespective of no. of pipes jointed or no. of pipe joints) | |||||||
| 1.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 9,000 | Mtr | 252.31 ₹22,70,835 | 222 ₹19,98,000 | 290 ₹26,10,000 | 100 ₹9,00,000 Lowest |
| 1.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 4,800 | Mtr | 276.93 ₹13,29,264 | 222 ₹10,65,600 | 300 ₹14,40,000 | 100 ₹4,80,000 Lowest |
| 2.00Welding of tapered joints at slope terrains/road crossings/locations for places where fixing of bends are not feasible, including cutting/welding and other allied works/places as directed by Engineer Incharge | |||||||
| 2.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 300 | No. | 94.5 ₹28,350 Lowest | 100 ₹30,000 | 1,000 ₹3,00,000 | 100 ₹30,000 |
| 2.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 150 | No. | 94.5 ₹14,175 Lowest | 120 ₹18,000 | 1,200 ₹1,80,000 | 100 ₹15,000 |
| 3.00Welding for clitting of pipeline ranges at slope terrain/road crossings/locations including cutting/welding and other allied works/ places as directed by Engineer Incharge | |||||||
| 3.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 400 | No. | 40.5 ₹16,200 | 15 ₹6,000 Lowest | 200 ₹80,000 | 100 ₹40,000 |
| 3.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 200 | No. | 40.5 ₹8,100 | 20 ₹4,000 Lowest | 200 ₹40,000 | 100 ₹20,000 |
| 4.00Making of bends and fitting of the same in the pipeline by necessary welding works | |||||||
Tender Value
₹1.3 Cr
EMD Value
₹1.6 L
Closing Date
12 Mar 2026, 5:00 pmClosed
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Laying and jointing of 03 nos. MS pipeline ranges (02 nos. pipeline range for old dipka quarry sump and 01 no. pipeline range for LK-1 quarry sump) for dewatering purpose at Dipka Expansion Project.
2026_SECL_354079_1
SECL/GM/DA/SO(EnM)/ e-tender/25-26/139 dtd-21/02/26
Open Tender
Electrical and Maintenance Works
Item Rate
75 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
5 documents required · 5 mandatory
₹1.6 L
9 Sept 2026
23 Feb 2026
14 Mar 2026
23 Feb 2026
12 Mar 2026
24 Feb 2026
23 Feb 2026 - 5 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Laying and jointing of MS Pipeline including loading, Unloading, transportation and placement manually (within unit/project), welding of pipes & cutting and fitting of Packing (if jointing by Nut-bolt). (Note:- Measurement of item no. 1 will be done in running mtr irrespective of no. of pipes jointed or no. of pipe joints) | |||||
| 1.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 9,000 | Mtr | - | - |
| 1.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 4,800 | Mtr | - | - |
| 2Welding of tapered joints at slope terrains/road crossings/locations for places where fixing of bends are not feasible, including cutting/welding and other allied works/places as directed by Engineer Incharge | |||||
| 2.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 300 | No. | - | - |
| 2.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 150 | No. | - | - |
| 3Welding for clitting of pipeline ranges at slope terrain/road crossings/locations including cutting/welding and other allied works/ places as directed by Engineer Incharge | |||||
| 3.01 | Nominal Pipe Size: 10inch/250mm dia. (OD-273mm) | 400 | No. | - | - |
| 3.02 | Nominal Pipe Size: 12inch/300mm dia. (OD-323.9mm) | 200 | No. | - | - |
| 4Making of bends and fitting of the same in the pipeline by necessary welding works | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.69 MB
Tendernotice_2.pdf
PDF • 1.38 MB
Tendernotice_3.pdf
PDF • 0.15 MB
BOQ_366935.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .