Loading
Loading…
Loading…
Tender Value
₹14.6 L
EMD Value
₹29,205
Closing Date
27 Aug 2026, 11:30 am3d left
EXECUTIVE ENGINEER MCPH 4 CHANDIGARH
Room no. 404 4th floor, New Deluxe Building M.C. Sector 17, Chandigarh
Providing and laying of 4 inch id and 6 inch id DI Water Supply pipe line near Slaughter House and from Plot No 136 140/1 to Plot No 136140/99 to overcome the low pressure problem in distribution pocket of Ind Area Ph I Chd Ch. To Capital Head Aug o
2026_MCC_94944_1
MCPH4/2026/57
Open Tender
Civil Works
Percentage
60 days
Sector 17 Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹29,205
Yes
21 Aug 2026
21 Aug 2026
27 Aug 2026
21 Aug 2026
27 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soils. (DSR No. 2.8.1) | 259.74 | P.Cum | 190 | ₹49,350.6 |
| 2Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : (DSR No. 18.72) | |||||
| 2.01 | 100 mm dia Ductile Iron Class K-7 pipes (DSR No. 18.72.1) | 200 | P.Mtr | 1,285 | ₹2,57,000 |
| 2.02 | 150 mm dia Ductile Iron Class K-7 pipes (DSR No. 18.72.2) | 281 | P.Mtr | 1,895 | ₹5,32,495 |
| 3Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : (DSR No. 18.70) | |||||
| 3.01 | 100 mm dia pipes @ 5.5 mtr of pipe length (DSR No. 18.70.1) | 36 | P. Joint | 90 | ₹3,240 |
| 3.02 | 150 mm dia pipes @ 5.5 mtr of pipe length (DSR No. 18.70.2) | 51 | P. Joint | 140 | ₹7,140 |
| 4Labour for cutting C.I. pipe with steel saw: (DSR No. 18.83) | |||||
| 4.01 | 100 mm diameter C.I. pipe (DSR No. 18.83.2) | 14 | Each Cut | 125 | ₹1,750 |
| 4.02 | 150 mm diameter C.I. pipe (DSR No. 18.83.4) | 20 | Each Cut | 240 | ₹4,800 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.38 MB
BOQ_116533.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].