PERIODICAL SERVICES TO OTF AND OFFICE BLDG OF PCDA NC COMPLEX INCLUDING SPL REPAIR TO SEWAGE LINE OF CERTAIN MD ACCN AND PROVN OF WOODEN CABINET OR ALMIRAH AT STORE AUDIT SECTION, ADMIN SEC AND AT ORS SECTION IN PCDA NC JAMMU UNDER GE JAMMU

Amount

Cleaning of water storage tank completely by removing all scale dirt / dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint including all Material and Labour of capacity range exceeding 250 ltrs to upto and including 1000 ltrs incl dismantling and refixing if required complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engr-in-Charge.

M&L Rendering 10mm thick in CM 1:6 on other than fair faces of brick surface finished even and smooth without using extra cement over a coat of epoxy Resin coating on damp surfaces upto height of four storey building complete all as specified and directed by Engr-in-Charge.

M&L Rendering 5mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement, all as specified and as directed by Engineer-in-Charge.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick surface finished even and smooth without using extra cement incl mixing of liquid water proofing compound (WPC shall be measured & will be paid separately) all as specified. (Including all necessary scaffolding lifiting arrangement for external surfaces).

M&L Rendering 20mm thick in CM 1:4 on concrete surface such as chajjas, upward fascias, roof surfaces and similar items including two or more dubbing coat, surface finished even and smooth without using extra cement incl mixing of liquid water proofing compound (LWPC shall be measured & will be paid separately) upto height of four storeyed bldg with all necessary, formwork, scaffolding, lifting arrangement for external surface upto 4 storey buildings) all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Preparing plastered new surfaces of walls and applying two coats of plastic emulsion paint, any tint over a one coat of primer on one coat of putty complete all as specified and as directed.

M&L applying two coats of exterior emulsion paint of any tint over one coat of primer on one coat of putty including preparation of new plastered surface complete all as specified and as directed.

M&L applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire brushing smoke, soot, moulds, moss and effloroscent salts and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces on ceiling all as specified and directed.

All as per Ser item No 11.00 here-in-before but one coat of plastic emultion paint over a one coat of primer on one coat of putty on wall complete all as specified and as directed.

All as per Ser item No 11.00 here-in-before but applying one coat of exterior emulsion paint over a one coat of primer on one coat of putty on wall complete all as specified and as directed.

S&F in repairs Stop cock / angle cock chromium plated fancy type cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt), & removing from site all as specified and directed by Engr-in-Charge.

Factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfasts complete all as specified and as directed.

S&F Factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated 35mm thick complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of synthetic enamel paint on new wooden surface over one coat of pink primer including preparation of new surface over 10 cm width or girth complete all as specified and as directed.

M&L Applying two coats of synthetic enamel paint on new steel surface including preparation of new surfaces of any description over 10 cm width or girth.

S&F 100 mm long stainless steel butt hinges (ISI marked) for door frame complete all as specified and as directed.

S & F Aluminium handle (ISI marked), cast type, anodised size 150 mm long complete all as specified and as directed.

S & F Aluminum, anodized, barrel towers bolt (ISI marked) of extruded section and fixed 200 mm size complete all as specified and as directed.

S&F Aluminum alloy (ISI marked) 300 mm long, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and as directed.

Easing of existing doors / windows of any description complete all as directed at site complete all as specified and as directed.

S&F in repairs Tubular towel rail Brass chromium plated, 20mm dia 'D' type 60 cm long between flanges complete all as specified and as directed. Makes: - Jaquar or equivalent with Kohler, Cera and Artize.

S&F in repair plate rack stainless steel of size 600 x 900 mm fixed with washer and plugs complete all as specified and directed. Makes: - Jaquar or equivalent with Kohler, Cera and Artize.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste coupling, waste pipe, including bedding in cement mortar on wall incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm complete all as specified and directed. Makes: - NIRALI, NEELKANTH, JAYNA, SILVERSHINE, JINDAL

S&F in repairs Brass chromium plated WHB Mixer for mixing hot & cold water, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore complete all as specified and as directed. Makes : - Jaquar or equivalent with Kohler, Artize and Cera.

S&F in repair PVC connection 15mm bore size with PTMT of length 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on wooden surface including preparation of old surface over 10 cm width or girth complete all as specified and as directed.

S&F in repair Toilet paper Holder of steel CP with flip complete all as specified and directed by Engr-in-Charge. Makes: - Jaquar, GEM, MARC

S&F in repair soap dish of steel CP in postion complete all as specified and as directed by Engr-in-Charge. Makes: - Jaquar, GEM, MARC

S&F in repair Cabinet mirror plastic body for toilet of size 350 x 600mm with 4mm thick looking mirror complete all as specified and as directed.

S&F in repair brass chromium plated Wall Mixer with L bend provision over head shower Arrangement with Connecting Legs, Wall flanges & Wall bracket for Hand Shower fixing with GI pipes 15mm dia complete all as specified and as directed. Makes : - Jaquar or equivalent with Kohler, Artize and Cera.

S&F in repair Stain less steel curtain rod of metallic 20 mm dia including brackets, fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-Charge.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium windows and ventilator shutters, siliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and alumnium grills etc. complete all as specified and as directed.

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall including taking down on PVC pipe complete all as specified and as directed.

S&F toughened glass door with spring fixed clip and including necessary fitting complete all as specified and as directed.

S&F in repair 15 mm bore wall mixer complete all as specified and as directed. Makes : - Jaquar or equivalent with Kohler, Artize and Cera.

S&F in repair 15 mm health faucet complete all as specified and as directed. Makes : - Jaquar or equivalent with Kohler, Artize and Cera.

M&L Preparing plastered new surfaces of walls and applying two coats of oil bound distemper any tint over a one coat of primer on 2mm thick putty complete all as specified and as directed.

M&L applying two coats of cement based paint over a one coat of primer including preparation of new plastered surface including curing of surface complete all as specified and as directed.

Description all as per Ser item No 11.00 here-in-before but applying a coat of Oil bound distemper on wall including curing of surface complete all as specified and as directed.

Description all as per Ser item No 11.00 here-in-before but applying two coats of cement based paint on wall including curing of surface complete all as specified and as directed.

Complete removal of vegetations, roots and shurbs from wall and making good the wall with cement mortar brick work and plastering including all necessary scaffolding up to 4 storey building complete all as specified and as directed.

Dismantling PVC water tank / demolition of RCC water storage tanks of capacity upto 1000 ltrs and removing from site complete all as specified and as directed.

S&F Rotational moulded polyethylene five layer water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic balls screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part-I.

S&F Rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part-I.

Taking up or down CI pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100 / 75mm dia pipe complete all as specified and as directed.

Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with cement joints fixed to wall complete all as specified and directed. (ISI marked).

Cast iron soil, waste and vent pipe of bore 75 mm sand cast in any length with or without ears with cement joints fixed to wall complete all as specified and directed. (ISI marked).

Cast iron soil, waste and vent pipe of bore 75 mm sand cast in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed. (ISI marked).

M&L for preparation of old painted surfaces of wood over 10 cm width or girth including rubbing down by sand paper, washing by water complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over wood surface of any description over 10 cm width or girth complete all as specified and as directed.

M&L for preparation of old surfaces of steel over 10 cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by bloing lamp complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over steel surface over 10 cm width or girth complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc, or for shafts, wells cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and getting out in any type of soil complete all as specified and as directed.

Demoliton / breaking of drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as specified of any dia pipe including demolition of cement concrete haunching / bedding etc complete all as specified and as directed.

M&L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in 200 mm bore pipe in D-2 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

S&F and laying 200 mm thick reinforced concrete pipes class NP-3 laid and jointed complete with collers as in trenches and complete all as specified and directed.

M&L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in 150 mm bore pipe in D-2 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

S&F and laying 150 mm thick reinforced concrete pipes class NP-3 laid and jointed complete with collers as in trenches and complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal of surplus excavated soil to a distance exc 250 m & n exc 500m and deposited where directed at a level n exc 1.5 m above the starting point all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exe 15 cm thickness (below ar above ground level) complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains including necessary form work etc complete all as specified and directed

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete including moulds, mitred / stopped end etc. complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per Ser item No 71.00 here-in-before but except bricks complete all as specified and directed.

M&L providing Precast cement concrete in cover slab (for manhole) type B-1 1:2:4 (using 20mm graded crushed stone aggregate) set in CM 1:4 complete all as specified and directed including demolition of old damaged covers.

M&L MS TMT bars 10 mm dia and over cut to length, bend to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel annealed wire not less than 0.09 mm dia or securing with clips complete all as specified and directed.

M&L cement concrete type B-1 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping of manholes including necessary form work etc complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required of 1650mm dia pipe complete all as specified and as directed.

Cleaning of septic tanks / man hole of any capacity by removing sludge and sludge water by pumping machine opreated with vaccume pressure to suck the sludge and containing in itself and the sludge / sludge water is to be disposed off to a distance of 2 KMs outside the periphery of defence land including taking off and refixing manholes covers complete all as specified and as directed.

S & F Factory made Pressed steel frames of size 60 x 40mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 no's 25 x 25 x 3mm thick angle iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfasts complete all as specified and as directed.

S&F in repairs 18/19 mm thick Prelaminated Particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws / nails to timber frame work as in shelves, cup board shutters, book case etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exc 3 sq.cm in leaping to shutters/shelves compete fixed all as specified and as directed.

S&F continuous piano hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm (when open) fixed with welding complete all as specified and directed. (ISI marked).

S&F Mild steel sliding door bolts, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 200mm long, complete all as specified and as directed. (ISI marked).

S & F Hasp & staple size 100 mm, alumium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. (ISI marked).

S&F Aluminium handle cast type, anodised size 125mm long complete all as specified and directed. (ISI marked).

M&l for preparation newly plastered surface / prepared surface on wall and applying wall care putty as per manufacturer's instructions complete all as specified and directed.

M&L for applying two coats of oil bound distemper over prepared new surfaces on wall complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

BLJ ENGINEERS AND CONTRACTORS

M/S RAVINDER SINGH

M/S PRITHIVI RAJ AND SONS

M/S Shesh Paul Gupta

Bidder Name

M/S Shesh Paul Gupta

M/S RAVINDER SINGH

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S PRITHIVI RAJ AND SONS

M/S INDERPAL SINGH

BLJ ENGINEERS AND CONTRACTORS