REPAIRS OVERHAULING SERVICING WORKS TO LT SERVO VOLTAGE STABILIZERS INCLUDING REPLACEMENT OF UNSERVICEABLE COMPONENTS ACCESSORIES OF LT PANEL FEEDER PILLAR BOXES AND CONNECTED ITEMS AT VARIOUS SUB STATIONSAND LT ACBs SWITCH GEARS IN EM INSTALLATIONS

Amount

Material and labour for Checking,Cleaning,servicing and overhauling of existing APFC Panels of any rating complete with PFC Controller, MCCB, MCB's, Contactors, relays and Busbar / cable connections of any rating / size with CRC spray including tightening of connections of power cables / control cable, bus bar, PFC Controller,capacitors and allied item connections including replacement of burnt Copper / Aluminium lugs all as per site requirements complete all as specified and directed. Note for Item 5 :- (i) The Major spares like MCCB/MCB/capacitor etc shall be measured and paid separately under relevant schedule of item. (ii) Quoted rate deemed to include labour cost for servicing/ maintenance. (iii) The quoted rate includes S&F necessary minor spare part/accessories like control wire, fuse, lugs as required for replacement of unserviceable items. (iv) The quoted rate includes consumables like CRC spray and hardware like screws, bolts and nuts etc.

Taking down existing defective APFC control relay from the panel and replace with new 6 stage APFC relay with CT input and including S&F CT of appropriate rating including necessary wiring and wiring materials complete all as specified and as directed. Make: AE/Siemens/Schneider/L&T/C&S

All as per item no-02 here-in-before but for 8 stage APFC relay with CT input and including S&F CT of appropriate rating all as specified and directed.

All as per item no-02 here-in-before but for 12 stage APFC relay with CT input and including S & F CT of appropriate rating all as specified and directed.

Taking down existing defective panel board indication lamp (R/Y/B/G colour) from the panel and replacing with new LED indicator lamp complete all as specified and as directed.

Taking down existing defective VAF meter from the panel board and replace with new 3 phase VAF meter,class1, with LED display,for showing voltage, Amps, frequency including necessary wiring and wiring materials complete all as specified and as directed. Make: AE / Siemens / Schneider / L&T / C&S

Taking down existing defective/unserviceable capacitor from the panel and replace with new heavy duty, aluminium casing,capacitor 5KVAR including necessary wiring and wiring materials complete all as specified and as directed. Make: Havells/Epcos/L&T/C&S/BCH

All as per item no-7 here-in-before but for capacitor 10KVAR all as specified and directed.

All as per item no-7 here-in-before but for capacitor 20kVAr all as specified and directed.

All as per item no-7 here-in-before but for capacitor 25kVAr all as specified and directed.

All as per item no-7 here-in-before but for capacitor 30kVAr all as specified and directed.

Material and labour for disconnecting all cable connections of unserviceable LT servo voltage stabilizer, 3phase, 50Hz, 415V, oil cooled of capacity upto 75 KVA any make and shifting to workshop including checking for defect and maintenance / servicing / overhauling to complete stabilizer comprising of servo motor, Electric control panel, wiring including replacing defective minor parts, burnt wiring etc as required and cleaning, greasing of all the moving parts, checking and reinstall and making all connection, testing for its smooth functioning on completion complete all as specified and directed.

All as per item no-12 here-in-before but for stabilizer of capacity 100KVA to 160 KVA of any make. Note for Item 12 & 13 :- (i) The Major spares like Transformer oil / wiring kit / motor/Gear/ contactor etc shall be measured and paid separately under relevant schedule of item as supply only. Fixing labour cost is included in the rate quoted for item-1&2. (ii) Quoted rate deemed to include labour cost for maintenance including maintenance of record as directed. (iii) The quoted rate includes S&F necessary minor spare parts / accessories like control wire set, fuse, limit switch, lugs as required for replacement of unserviceable spares/accessories of any type. (iv) The quoted rate includes consumables like grease and hardware like bolts and nuts etc including necessary machining work of any type. (v) This item shall be measured and paid as carriedout, but once the stabilizer made serviceable and afterward If any defect arrise in the repaired stabilizer the contractor should repair/rectify the same without claiming any additional cost on this account till completion of defects liability period of 2 years. (vi) Repair/ servicing work to be carried out only by service person of OEM or his authorised agency.

Supply only following spare parts / accessories suitable for servo voltage stabilizer of any make. Note for item no- 4: (i) The following spareparts/accessories to be used as replacement during repair work vide item No-12 and 13 here-in-before. (ii) The Labour cost for fixing spareparts/accessories to be included in the rate quoted for item no- 12 & 13 here-in-before.

Variac 10 Amp capacity all as directed.

Variac 15 Amp capacity all as directed.

Variac 23 Amp capacity all as directed.

Variac 35 Amp capacity all as directed.

Variac 60 Amp capacity all as directed.

Variac 100 Amp capacity all as directed.

Variac 125 Amp capacity all as directed.

Gear upto 55 teeth as per existing specification all as directed.

Gear 56 to 75 teeth as per existing specification all as directed.

Gear 76 to 100 teeth as per existing specification all as directed.

Power transformer 230V/0-15 all as directed.

LED display board suitable for servo voltage stabilizer.

Motor 3KG suitable for servo volt stabilizer all as directed.

Motor 7KG suitable for servo volt stabilizer all as directed.

COS switch 32 Amp all as directed.

COS switch 63 Amp all as directed.

COS switch 125 Amp all as directed.

COS switch 200 Amp all as directed.

COS switch 250 Amp all as directed.

3 Phase BBT for 20 KVA stabilizer all as directed.

3 Phase BBT for 32 KVA stabilizer all as directed.

3 Phase BBT for 50 KVA stabilizer all as directed.

3 Phase BBT for 75 KVA stabilizer all as directed.

3 Phase BBT for 100 KVA stabilizer all as directed.

3 Phase BBT for 160 KVA stabilizer all as directed.

Contactor three phase 32 Amp all as directed. Make - Schneider/ABB/Legrand/Siemens

Contactor three phase 45 Amp all as directed. Make - Schneider/ABB/Legrand/Siemens

Contactor three phase 95 Amp all as directed. Make - Schneider/ABB/Legrand/Siemens

Contactor three phase 185 Amp all as directed. Make - Schneider/ABB/Legrand/Siemens

Supply only New Transformer Oil as per IS-335 Std requirement. MAKE : POWER OIL/HP/Indian oil/BP

3KG RC Network suitable for servo volt stabilizer all as directed.

7KG RC Network suitable for servo volt stabilizer all as directed.

Control board suitable for servo volt stabilizer all as directed.

Taking down existing defective CT coil from the panel and replace with new CT rating 100 / 5A to 200 / 5A including necessary wiring and wiring materials complete all as specified and as directed. Make: AE/Kappa/Siemens/L&T/C&S/BCH

All as per item no-15 here-in-before but for CT rating 250/5A to 500/5A all as specified and directed.

Supply and fix MCB SP 240 volts 6-32 amps C curve with 10KA breaking capacity. Make: Legrand / Siemens / Schneider / ABB

Supply and fix MCB TP 415 volts 6-32 amps C curve with 10KA breaking capacity. Make: Legrand / Simens / Schneider / ABB

Supply and fix MCB TP 415 volts 40-63 amps C curve with 10KA breaking capacity. Make: Legrand / Simens / Schneider / ABB

Material and labour for one coat of synthetic enamel spray painting of approved colour to Servo stabilizers over entire external surfaces including preparation of surfaces , free from dent etc including necessary writing of lettering and marking No etc complete all as specified and as directed.

Material and labour for dismantling, taking down, checking,cleaning and servicing of switch gear of rating 315 A to 400A MCCB any type contacts with CRC spray including checking the bus bar connections / power cable from Main Bus bar to MCCB and out going cable connections of MCCB, refixing, tightening of incomming and outgoing cables including replacement of Copper / Aluminium lugs as per site requirements and removing the carbon deposit complete all as specified and directed.

All as per item no-21 here-in-before but for switch gear of rating 200 A to 250A MCCB any type complete all as specified and directed.

All as per item no-21 here-in-before but for switch gear of rating 100A to 160 A MCCB any type complete all as specified and directed

Material and labour for writing in coming and out going details in panel as per site requirement, with letter height not less than 15mm, boldly and solidly with thin self adhesive sticker of approved tint complete all as specified and as directed. Note: writing for each incomming / out going feeder / breaker in the panel shall be measured as one job.

Supply and fixing MCCB Adjustable Thermal & Fixed Magnetic setting 415V, 3 Pole of rating 200 Amps, ICS=100%ICU, Breaking capacity 36 KA including additions / altertions to existing MCCB mounting place in the panel for properly fixing and reconnecting In / Out going bus bar or cable connections including s&f extended teriminals as per site requirements and making good distrubed panel surfaces all as specified and directed. Make - Schneider / ABB / Legrand / Siemens

All as per item no-25 here-in-before but for MCCB of rating 100 Amps, ICS=100%ICU,3 pole, Breaking capacity 16 KA all as specified and directed.

All as per item no-25 here-in-before but for MCCB of rating 160 Amps, ICS=100%ICU,3 pole, Breaking capacity 16 KA all as specified and directed.

All as per item no-25 here-in-before but for MCCB of rating 63 Amps, ICS=100%ICU,3 pole, Breaking capacity 16 KA all as specified and directed.

Material and labour for PCC as in coping round / cylidercal type for existing position , roof kerb or mud stops, rounded or chemfered on edges type, road cutting filling etc., PCC 1:3:6 (Using 20mm graded stone aggregate) including necessary form work as required complete all as specified and as directed.

Taking up existing old/ unserviceable/ burnt under ground cable from the existing positions/ trenches etc., including testing with the help of megger, disconnecting and removing unserviceable portion of cable of following size complete all as specified and as directed. Note: (i) Excavation/ earth work shall be measured and paid seprately under relavent items. (ii) Retrived serviceable bricks from site be properly stacked and reused as protection to UG cable and shall be measured and paid separetely under relevent items. (iii) Serviceable portion of cable shall be relayed as directed and shall be measured and paid separetely under relevent items.

300 Sqmm 3.5 core

240 Sqmm 3.5 core

185 sq mm 3.5 core

120 sqmm 3.5 core

95 sqmm 3.5 core

70 sqmm 3.5 core

50 sqmm 3.5 core

35 sqmm 3.5 core

25 sqmm 4 core

16 sqmm 4 core

Relaying serviceable portion of cable as obtained against item No 30 here-in-before in the trench including necessary connections with suitable lugs complete all as specified and directed . Note: Cable straight through joints/ bus bar chamber if any as per site requirement shall be measured and paid separately under relevent item of schedule.

300 Sqmm 3.5 core

240 Sqmm 3.5 core

185 sq mm 3.5 core

120 sqmm 3.5 core

95 sqmm 3.5 core

70 sqmm 3.5 core

50 sqmm 3.5 core

35 sqmm 3.5 core

25 sqmm 4 core

16 sqmm 4 core

Supply, laying XLPE insulated, screen, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100v grade, with aluminium conductor of following size for replacement of unserviceable portion of cable including connecting up with proper size aluminium lugs, glands wherever necessary in LT panels/ bus bar chamber panel /joints etc., all as per site requirement including testing complete all as specified and as directed. Make -: POLYCAB / NICCO / PLAZA /Havells Note:(i) Rates includes supply and fix necessary glands,lugs, etc., (ii) Excavation/ Earth work shall be measured and paid separately under relevent items. (iii) Cable straight through joints if any as per site requirement shall be measured and paid seprately under relevent item of schedule.

300 Sqmm 3.5 core

240 Sqmm 3.5 core

185 sq mm 3.5 core

120 sqmm 3.5 core

95 sqmm 3.5 core

70 sqmm 3.5 core

50 sqmm 3.5 core

35 sqmm 3.5 core

25 sqmm 4 core

16 sqmm 4 core

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth for taking up/ laying cable etc., and getting out for soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cms for soft /loose soil complete all as specified and as directed.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Spreading riddled earth as obtained from item No.29 here-in-before for UG cable cushioning complete all as specified and as directed. Note: if the required qty of riddled earth not obtained from above item the contractor should bring the same from other location shown (not beyond 50m) including necessary earthwork as directed for borrow pit /trench to obtain the required qty including removing surplus soil without any additional cost and the cost deemed to be included in the rate quoted by the contractor.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and as directed.

Relaying of serviceable bricks as obtained from item ser No.33 here-in-before complete all as specified and as directed.

Material and labour for boring for holes under road , pavements / hardstanding by trenchless technology with necessary machines without damaging existing road / hard standing including necessary tools and plants and supply and lay HDPE pipe of 100mm dia suitable for 0.4mpa working pressure complete all as specified and as directed.

Material and labour for straight through cable heat shrinkable joint kit for 1.1 KV grade complete with jointing material and accessories suitable for following size XLPE cable complete all as specified and as directed .

240 sqmm 3.5 core to 300 sqmm 3.5 core

150 sqmm 3.5 core to 185 sqmm 3.5 core

50 sqmm 3.5 core to 120 sqmm 3.5 core

25 sqmm 4 core

16 sqmm 4 core

M&L for cleaning and servicing of complete panel with following capacity ACBs, contacts and busbars connections with CRC spray, checking the bus bar connections /power cable from main bus bar to MCCBs and out going cable coonections of MCCB, tightening of all bolts,nuts at power cables/ bus bar/ outgoing cables including replacement of burnt copper/ aluminium lugs as per site requirement, removing the carbon deposit and reconditioning of door lock complete all as specified and as directed .

Panel with ACB capacity upto 630 Amps

Panel with ACB capacity above 630 and upto 1250 Amps

Surface excavation n.exc 30cms deep but averaging 15cms deep and getting out in soft/ loose soil including removing green vegetation, roots, bushes etc., from surroundings of poles, panels, etc., complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered cemented surface and applying two coat of white wash on cemented surface/wall etc complete all as specified

Dismantling and taking out following size cable from existing feeder pillar/ LT panel and removing/ cutting burned part of cable including taking out loop for extension of cable upto required length and fixing /connecting the cable in existing position including necessary nuts, bolts, lugs of approriate size and refixing of cable gland complete all as specified and as directed by Engr-in-charge for following sizes: Note: The quoted rate includes necessary earth work and supply and fixing of lugs of appropriate sizes.

185 sqmm to 240 sqmm

95 sqmm to 120 sqmm

50 sqmm to 70 sqmm

16 sqmm to 35 sqmm

Material and labour for painting to existing LT feeder pillar box/panel boards after preparing/ scraping the surface with emery sheet in all respect for making smooth surface including painting with two coat of exterior enamel paint water proof suitable for existing LT feeder pillar box/panel board surfaces including writing in coming and out going details as per site requirement and as specified complete all as specified and as directed. Note: White washing to copping/pedestal of LT feeder pillar box / panel board shall be measured and paid separately.

Material and labour for welding works to existing LT feeder pillar box/panel board doors including removing broken hinges and supply and fixing new heavy duty hinges as per existing type and qty including writing in coming and out going details as per site requirement and painting with synthetic enamel paint over redoxide on the welded surfaces to make good the disturbed surface and match with existing tint complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered cemented surface and applying two coat of white wash on cemented surface/wall etc complete all as specified

Supply, fabricate, install and testing outdoor type LT bus bar chamber box of size 600x500x400mm from CPRI certified panel manufacturers made out of 3mm thick CRCA sheet steel powder coated with front and rear opening including allen key locking facility and slanting cannopy on roof and mild steel channels base frame angles of 50x50x5mm in and including TPN aluminium bus bar of 200A capacity for looping and branch connection, the bus bar placed on suitable capacity insulators including danger notice plate on both side, neoprene rubber gasket to make it completely dust and vermin proof the same will be fixed in ground with necessary PCC foundation made by (1:2:4) type B1 complete all as specified and directed by Engr-in-charge. Note - 1) Drawing shall be approved from Deptt by the contractor before placing a order to CPRI certified panel manufacturers. 2) The cost deemed to be included in the quoted rate for reconnecting Old existing cables to boxes carefully using a suitable glands and also taking up loop from the under ground and making good in all respect where ever required as per site requirement.

Supply, fabricate, install and testing outdoor type LT bus bar chamber box of size 800x600x400mm from CPRI certified panel manufacturers including provision of dimrail for mounting 1 No of MCCB (MCCB will supply separetely), hinged door with allen key locking arrangement made out of 3mm thick CRCA sheet steel powder coated with front and rear opening slanting cannopy on roof and mild steel channels base frame angles of 50x50x5mm in and including TPN aluminium bus bar of 200A capacity for looping and branch connection, the bus bar placed on suitable capacity insulators including danger notice plate on both side, neoprene rubber gasket to make it completely dust and vermin proof the same will be fixed in ground with necessary PCC foundation made by (1:2:4) type B1 complete all as specified and directed by Engr-in-charge. Note - 1) Drawing shall be approved from Deptt by the contractor before placing a order to CPRI certified panel manufacturers. 2) The cost deemed to be included in the quoted rate for reconnecting Old existing cables to boxes carefully using a suitable glands and also taking up loop from the under ground and making good in all respect where ever required as per site requirement.

Supply, Fixing and Testing Powder coated Outdoor street light control box of size not less than 300 x 200 x 80 mm CRCA 3 mm thick IP 65 fabricated by CPRI certified panel manufacturer including suitable terminal TPN 10 KA SMC Connector ( for 3 Phase Cable Line IN & OUT) and provision of dimrail for mounting 3 Nos MCB SP including S&F 01 No MCB 6 A SP C curve , canopy weather proof, hinged door with allen key locking arrangement for fixing on PCC / Steel Poles in and including necessary MS Clamps - 02 Nos of size 300mmx25mmx5mm shape and size with nut, bolts and washers as per site requirement for cemented pole complete all as specified and directed by Engineer-in-charge. Note - 1) Drawing shall be approved from Deptt by the contractor before placing a order to CPRI certified panel manufacturers. 2) The cost deemed to be included in the quoted rate for reconnecting Old existing cables to boxes carefully using a suitable glands and also taking up loop from the under ground and making good in all respect where ever required as per site requirement.

m/s SRI VALLI ENTERPRISES

R.P.TRADERS

BALA BUILDERS