Ajhuwa Bypass marg (ODR) ka nirman karya

Amount

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per MORT&H clause Specification 301 (Sl.No 3.6)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per MORT&H clause 305 (Sl.No. 3.17)

Construction of earthen shoulder with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.with lead up to 1000m as per MORT&H clause 305 (Sl.No. 3.18)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.

Providing, laying, spreading and compacting graded wet mix macadam (Stablized with Emulsion and Cement) specificatied as in IRC 37-2018 including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers. With emulsion 3.5% and Cement OPC 1%

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared Bituminous surface cleaned with mechanical broom. as per MORT&H clause 503 (Sl.No. 5.2 ) (for DBM)

Providing and laying dense graded bituminous macadam with TPH computerized type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause 505 complete in all respects.

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared Bituminous surface cleaned with mechanical broom. as per MORT&H clause 503 (Sl.No. 5.2 ) (for BC)

Providing and laying bituminous concrete with TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects

Excavation Earthwork in excavation for as per drawing and technial specification Clause 305.1 including setting our construction of shoring and bracing removal fo stumps and other deleterious material and disposal upto a lead fo 50 m dressing of sides and bottom and backfilling in trenches with excvated suitable material.

P.C.C. grade M 10 (1:3:6) Providing concrete for plain/rainforced concrete in open foundations complete as per drawings and Mord specification Clauses 802,803,1202, 1203

P.C.C. grade M 15 (1:2:4) Providing concrete for plain/rainforced concrete in open foundations complete as per drawings and technical specification Clauses 802,803,1202, 1203

Brick work M-150 Maslonry work in cement mortar1:3 in foundation complete

Pointing with cement mortar (1:3) on brickwork/ C.R. Stone masonry as per drawing and technical specification Clause 613.3 and 1204

S/l of 1000 mm dia NP-3 H.P. culvert

S/l of 600 mm dia NP-3 H.P. culvert

M/S SANJAY ENTERRPRISES

M/S Tripathi Construction