Repair to E/M Installations and Other Allied Works and Repair/ Maint Of Internal Electrification at Zone A To F at Faridkot Mil Stn

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

S & F coloured Glazed ceramic tiles 450X300X7MM thick in vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick rendering in cement mortar 1:4 on brick or concrete surface complete all as specified and directed by Engineer in Charge.

S & F Non skid ceramic coloured tiles 7 to 8 mm thick Matt finish (Square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in cement mortar (1:4) complete all as specified and directed by Engineer in Charge.

Machine cut kota stone slab as in flooring /treads of size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 20mm thick screed bed or bedding layer CM 1:6 for laying finishes complete all as specified and directed by Engineer in

Taking down cement plaster or terrazo from brick walls or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in Charge.

M&L Rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete including preparation of new surfaces plastered or unplastered and applying two coats of oil bound distempler on wall over one coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete including preparation of new surfaces plastered or unplastered and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 10 mm thick cement plaster as on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete including preparation of new surfaces plastered or unplastered and applying two coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L rendering 5 mm thick rough cast plaster over 10mm thick C:M 1:4 on fair face of brick or concrete surface complete all as specified and directed by Engineer-in-Charge.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engineer-in-Charge. (Paymentfor providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per pecifications and direction of the Engineer-in-charge

M & L for preparation of newly plastered or unplastered surfaces of walls, soffits/facia of chajja/roof slab etc and applying two coats of cement base paint complete all as specified and directed by Engineer in Charge. Note : Curing of surface will be carried out as per Para 15.15.3 of SSR Part-I.

M & L preparation of old decorated surfaces of Wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescence salt and treating oil and greasy spots and applying two coat of oil emulsion distemper complete all as specified and directed by Engineer in Charge.

M & L preparation of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescence salt and treating oil and greasy spots and applying two coat of oil emulsion distemper complete all as specified and directed by Engineer in Charge.

Providing and applying two component of cementitious & acrylic flexible water proofing & protective coating of fast flex or euivelant in two coats having hydrostatic (positive) water pressure resitence with a paint brush over existing surface of water tank upto 300mm height. A layer of Polyster reinforced coated net to be laid in between the two coat of Fast Flex. The application to be done after removal of all loose material like dust etc with wire brush and filling cracks and patches with polymer based mortar or micro concrete complete all as specified and directed by Engineer-in-Charge. Note : Treatment shall be carried out as per manufacturer instructions. Make : Dr Fixit

Demolition of concrete (un-reinforced) in ground floors/ first floor and pavings not exceeding 15cm thick complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling /mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for hardcore of broken bricks of gauge not exceeding 63mm deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed by Engineer in Charge.

M & L for sand filling with river washed and screened dry fine sand as in under floors or in foundations including watering, well ramming and consolidation complete all as specified and directed by Engineer-in-Charge.

S & F 60mm thick precast interlocking paving blocks factory casted using grey cement and no pigment, machine pressed and of any shape hexagon/ triangular/ zigzag/ I-shaped etc as directed having compressive strength not less than 350 Kg/ Sqcm M-35 grade conforming to IS-15658-2006 and laid over complete all as specified and directed by Engineer-in-Charge.

S & F 80mm thick precast coloured interlocking paving blocks factory casted using grey cement and no pigment, machine pressed and of any shape hexagon/ triangular/ zigzag/ I-shaped etc as directed having compressive strength not less than 400 Kg/ Sqcm M-40 grade conforming to IS-15658-2006 and laid over complete all as specified and directed by Engineer-in-Charge.

M & L for (factory casted, rubber moulded) pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of any size or any thickness with plain fair faces, smooth finish, including chamfering, weathering, throating etc set in cement mortar 1:4, including necessary form work and excavation & earth work for embedding kerb stone at a depth as directed & temping around kerb stone and removal of surplus soil to a distance n.exc 50 metre & depositing where directed complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel framed work of E-165 (Fe-290) as in grills/guard bars shouldered with steel windows/ventilators frames, cooler stand, ladder etc including one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes of appropriate size in brick / concrete surfaces for insertion of PCC block for hold fasts complete all as specified & directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each including cutting holes of appropriate size in brick / concrete surfaces for insertion of PCC block for hold fasts complete all as specified and directed by Engineer-in- charge.

S&F in repair factory made steel window with side hung shutters including box type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete with glazing bars dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

M & L for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L for pressed steel sheet frame (1.25 mm sheet thickness) for door of size 105mm x 60mm with one or more rebates including necessary fixing arrangement such as lugs, hinges, lock strike plate etc including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S & F 35mm thick second class hard wood glazed and skeleton shutters confirming to IS-1003(Part-I) open rebated and prepared to receive glass / gauge etc, (without sash bars) edges of framing plain, chamfered or rounded fixed with cut and mitred beads for securing glass, etc. Sizes of members as specified in SSR Part-I, Section -8,clause- 8.24 (a) and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodized handles 150 mm long dia 'D' type fixed to doors with screws complete all as specified and directed by Engineer-in-Charge.

S&F 250 mm long MS sliding door plate type stove enamelled black with bright bolt not less than 12mm dia with including a min of 6 bolts and nuts 9 on bolt plate and 2 on staple plate complete all as specified & directed by Engineer-in- charge.

S&F aluminium anodized tower bolts 150 mm long fixed to doors with screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primed complete all as specified and directed by Engineer in Charge.

M&L for Roof treatment to RCC roof as specified below as directed :- (a) Cutting & uprooting grass on roof top, removing rubbish off the premises, cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints,washing,drying and removing all dirt/dust to receive concrete padding/ plaster etc complete (b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, dmanged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Apllying one coat of prime seal / Epoxy Primer/ Shaili Urethane BTD white diluted with potable water in the ratio of 1:1 and apply @ 0.40 Kg/Sqm (0.20 Kg BTD + 0.20 Kg water) (d) Laying polyster reinforced fiber net / 50gsm Geotextile mesh upto 300mm on walls. (e) Applying three coat of Hydro Shield PUD micro fibre reinforced UP resistent polyurethane (solid content 68%) / Damp proof ultra UV stable fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers (Solid content 55%) / Smart care PU magnum elastomeric water proofing coating based on hydrophobic plyuethane (Solid content 85%) / Single component elastomeric Liquid Membrane Shali Urethane BTD white/ coloured (Elongation 400% + 50, Solid contents > 80% & Specific gravity @ 30 OC 1.5 + 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush / roller upto 300mm on walls. Make : Dr Fixit/ Asian/ STP Limited

M&L for PCC type A-0, 1:1.5:3 using 12.5 mm graded crushed stone aggregate as in filling and repair complete all as specified and directed by Engineer in Charge.

M & L for 50mm thick plain cement concrete (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching for manholes, bands, coping, bed plates, steps, ramps, kerbs etc including slightly rounded or chamfered on edge included neccessary formwork complete all as specified and directed by Engr-In-Charge.

Demolition of brick work/stone masonry built in cement mortar including all quoins arches, pillars etc complete all as specified and directed by Engineer in Charge.

M&L for Brick work with fly ash bricks sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 39 here-in-before but except bricks complete all as specified and directed by Engineer in Charge.

Excavation in trenches in soft loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed by Engr-In-Charge.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding. 25cm thick each complete all as specified and directed by Engr-In-Charge.

Removal of surplus soil to a distance not exceeding. 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-In-Charge.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer in Charge.

Dismantling posts or struts (Wood, Steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed by Engineer in Charge.

S&F Rolled sections as in posts, struts and staples in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary bolting or riveting, welding etc and similar work conforming to Fe-290- W(Gde- E-165) complete all as specified and directed by Engineer-in- charge.

Supply only mild steel galvanized chain link fencing of any size or type complete all as specified and directed by Engineer in Charge. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly. BOO duly countersigned by GE shall be enclosed with final bill.

Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed by Engineer in Charge. Note : Supply of chain link and line wire shall be measured and paid seperately.

All as per item No 49 here-in-before but fixing only complete all as specified and directed by Engineer in Charge.

Supply only mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut shank size 11mm to 15mm dia and n. exc. 5cm long complete all as specified and directed by Engineer in Charge.

Preparing surfaces of new steel and treating ends of posts etc with coal tar black paint area tarred exc. 0.10 sqm but n.exc 0.50 sqm each complete all as specified and directed by Engineer in Charge

Supply only mild steel in flat, round or square bars, in available length in FE 410-W (Gde E-250) quality -A complete all as specified and directed by Engineer in Charge.

Demolition of cement concrete (unreinforced) as in manhole foundation and bedding of sewer lines etc below ground level and disposal off rubbish to a distance exceeding 1 Km and not exceeding 1.5 Km complete all as specified and directed by Engineer in Charge.

Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 150 mm dia set in cement mortar including demolition of haunching concrete complete all as specified & directed by Engineer in Charge.

S&F Reinforced concrete pipes class NP-2 laid, jointed and tested complete with collar of size 150mm (internal dia) as in foul conditions all as specified and directed by Engineer in Charge.

M&L for Concrete bed to drain pipes using PCC 1:3:6 type C-2 100mm thick 40mm graded stone aggregate including packing under haunching against the sides of pipe after laid & tested for 150mm bore of pipes complete all as specified and direced by Engineer in Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer in Charge.

M&L for reinforced cement concrete type A-1, 1:1.5:3 using 20 mm graded crushed stone aggregate (nominal mix) as in foundation including rafts, footings, foundation beams, plinth beams, base of columns etc complete all as specified and directed by Engineer in Charge.

S & F Factory made SFRC (Steel fiber Reinforcement Concrete ) Manhole cover (without frame) medium duty 900mmx450mm x70mm thickness including 2mm thick flat iron frame all round complete all as specified and directed by Engineer in Charge.

M&L for PCC 1:3:6 type C-I using 20mm graded stone aggregate as in Manhole and similar works complete all as specified & directed by Engineer in Charge.

Demolition of reinforced cement concrete in ground floor in dispoal of rubbish outside etc complete all as specified and directed by Engineer in Charge.

M&L for reinforced cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggregate as in foundation including rafts, footings, foundation beams, plinth beams, base of columns etc complete all as specified and directed by Engineer in Charge.

S&F MS TMT Bars of 10 mm dia and over cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed by Engineer in Charge

S&F MS TMT Bars up to 10 mm dia in stirrups, spacers and binders,cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed by Engineer in Charge

M&L for hard core of broken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfacescomplete all as specified and directed by Engr-In-Charge.

S&F solid PVC double door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube in opening as per specification and drawings mentioned in MES schedule complete all as specified & directed.

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S&F Factory made box type mild steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm complete all as specified and directed by Engineer-in-Charge.

S&F 100mm butt hinges medium weight, cold each rolled, mild steel complete all as specified and directed by Engineer-in-Charge.

S&F mild steel barrel tower bolts 150 mm long fixed to doors with screws complete all as specified and directed by Engineer-in-Charge.

S&F mild steel door handle 150 mm long fixed to doors with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repair Mild steel galvanized tubing 15 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

S&F in repair Mild steel galvanized tubing 20 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge.

S&F in repairs Vitreous china squatting pan Orrisa pattern, size 580x440mm white with integral foot rests including necessary lime concrete and 100mm bore cast iron "P" or "S" trap long neck for connecting WC to branch piece with cement joints and 32mm dia PVC flush pipe, complete all as specified and directed by Engineer in Charge.

Supply and fix in repair PVC low level flushing cistern white 10 litre capacity, valveless syphonic action type with float, handle complete all as specified and directed by Engineer-in-Charge.

S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore and fixed in repairs complete all as specified and directed by Engineer in Charge.

S&F in repair bib taps, chromium plated cast copper alloy screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer in Charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed by Engineer in Charge.

S&F in repair Angle valves, fancy type, CP with long shank and cup, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed by Engineer in Charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed 15 mm dia of pipe complete all as specified and directed by Engineer in Charge.

S&F in repair Angle valves, CP with long shank and cup, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed by Engineer in Charge.

M&L in repairs PVC Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed by Engineer in Charge.

S&F PVC (SWR) gully trap 150/110 mm, setting and jointing with solvent cement with outlet pipes and PCC 1:2:4 type B1 filling around trap and 25 mm thick cover slab complete all as specified and directed by Engineer-in- Charge.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvant and fixed to walls Cutting holes in brick wall built in cement mortar for inserting holdfasts, depth of embedded portion not exceeding half brick (measured from the face of jamb into the wall) complete all as specified and directed by Engineer-in- charge.

M&L for checking and locating faults of light/power circuits and defective electrical light/ fan/ bell/ socket outlet 5 Amps and 15 Amps for continuous electric supply or broken neutral system, rectify the same, tightening of loose wire/circuit by using the same old wire or by using new wire up to 1.00 metre length and similar petty work complete all as specified and directed by Engineer in Charge. Note : Switches, socket, modular switch/ sockets, fan regulator, long ladder, tube light, ceiling rose, bulk head fittings, security lights, DB SPN 8 way & DB TPN 4 way, MCB SP, MCB SPN, TM junction box, mounted sheet and condensor etc shall be measued and paid separately under respective items.

S&F in replacement MCB single Pole 240 Volts 6 to 32 Amp, 10 KA complete all as specified and directed by Engineer in Charge.

S&F in replacement MCB SP&N 240 volt 40 Amp, 10 KA complete all as specified and directed by Engineer in Charge.

S&F in replacement MCB SP&N 240 volt 63 Amp, 10 KA complete all as specified and directed by Engineer in Charge.

S&F in replacement Isolator suitable for 440 volts AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10KA as specified and 63 Amps complete all as specified and directed by Engineer in Charge. Note : Make of the MCB / Isolator shall be the same as that of DB.

S&F in replacement Isolator suitable for 440 volts AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10KA as specified and 40 Amps complete all as specified and directed by Engineer in Charge. Note : Make of the MCB / Isolator shall be the same as that of DB.

S&F in replacement Isolator suitable for 415 volts AC supply, Four pole 100 Amps complete all as specified and directed by Engineer in Charge. Note : Make of the MCB / Isolator shall be the same as that of DB.

S&F in replacment electronic regulator step type 240 volts Singla phase 300 watt complete all as specified and directed by Engineer in Charge.

S&F in replacment electronic regulator step type 240 volts Singla phase 100 watt complete all as specified and directed by Engineer in Charge.

S&F in repalcement Plug metal clad SP & N with a 2 pin earth plug and socket with one MCB SP 20 Amps suitable for working on 240 volts AC complete all as specified & directed by Engineer-in-Charge.

S&F in replacement factory made sheet metal enclosure for double door (Acrylic) distribution board with epoxy powder coated surface mounted SP & N 12 way, protection class IP-43 suitable for mounting MCB, conforming to IS-8623, BS-5484 with 200 Amps rated copper bus bar stove enameled dust and vermin proof suitable for working on 240 volts AC supply complete all as specified & directed by Engineer-in-Charge.

S&F in replacement factory made sheet metal enclosure for double door (Acrylic) distribution board with epoxy powder coated surface mounted SP & N 8 way, protection class IP-43 suitable for mounting MCB, conforming to IS-8623, BS-5484 with 200 Amps rated copper bus bar stove enameled dust and vermin proof suitable for working on 240 volts AC supply complete all as specified & directed by Engineer-in-Charge.

S&F in replacement factory made sheet metal enclosure for double door (Acrylic) distribution board with epoxy powder coated surface mounted SP & N 4 way, protection class IP-43 suitable for mounting MCB, conforming to IS-8623, BS-5484 with 200 Amps rated copper bus bar stove enameled dust and vermin proof suitable for working on 240 volts AC supply complete all as specified & directed by Engineer-in-Charge.

S&F in replacement of MCB type loadline vertical TPN DB 4 way IP-43 acrylic door including provision in and including of MCCB 125 amp 4 pole 25 KA as a incommer, MCB SP 40 to 63 Amp 10 KA C Curve - 12 Nos complete all as specified & directed by Engineer-in-Charge.

S&F in replacement of load line distribution board double door TPN vertical, IP-43 protection DB 12 way including 160 Amps DPX MCCB 36KA, 3 Pole as in grouting on wall and connecting with suitable spreader links with lugs complete after taking down old existing load line MCCB DB complete all as specified & directed by Engineer-in-Charge. Note for Item No. 98 to 102:- Make of the MCB shall be the same as that of DB.

S&F in replacement switch piano type single pole one way 5 Amp, 230 AC Volt supply on laminated sheet top cover complete all as specified and directed by Engineer in Charge.

S&F in replacement switch Piano type single pole one way 15 Amp 230 AC Volt on laminated sheet top cover complete all as specified and directed by Engineer in Charge.

S&F in replacement socket two in one ,3 Pin 5 Amps 230 AC Volt supply on laminated sheet top cover complete all as specified and directed by Engineer in Charge.

S&F in replacment socket Pinao type 2 in 1, 3 Pin 5/15 amp, 230 AC Volt on laminated sheet top cover complete all as specified and directed by Engineer in Charge.

S&F in replacement Ceiling rose, three terminals with bakalite 20mm back plate complete all as specified and directed by Engineer in Charge.

Supply & fixing in replacement PVC Lamp holder suitable for and including batten fittings with backalite 20mm back plate with retrofit LED bulb 5 W complete all as specified and directed by Engineer in Charge.

Supply & Fixing and testing in renewal LED light fitting 1 x 18/20 watt including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15 % lumen output should not be less than 1700 lumens, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin suitable for Gas/vapur of IIA & IIB and Zone 1 & 2 including connecting up with twin core twisted flexible copper conductor with suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of 1X10 watt LED retrofit type bulk head fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed by Engineer-in-Charge. Make :Bajaj cat part no. BIBWP 10W LED or equivalent cat part of Philips / Havells

S&F in replacement bell "ding dong" AC 230 AC Volt single phase complete all as specified and directed by Engineer in Charge.

S&F in repalcement bell push switch 5/6 Amps one way with ISI mark suitable to operate on 220 volts AC supply complete all as specified and directed by Engineer in Charge.

S&F in replacement sub-main wiring with two run single core cables PVC insulated and un-sheathed standard copper conduction of cable of size 1.5 sqmm (Nominal Area) with one run of PVC insulated unsheated copper cable of size 1.5 sqmm duly connected with earth dolly the sub main wiring will be done in existing PVC conduit pipe of any size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sub-main wiring with two run single core cables PVC insulated and un-sheathed standard copper conduction of cable of size 2.5 sqmm (Nominal Area) with one run of PVC insulated unsheated copper cable of size 2.5 sqmm duly connected with earth dolly the sub main wiring will be done in existing PVC conduit pipe of any size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sub-main wiring with two run single core cables PVC insulated and un-sheathed standard copper conduction of cable of size 4 sqmm (Nominal Area) with one run of PVC insulated unsheated copper cable of size 4 sqmm duly connected with earth dolly the sub main wiring will be done in existing PVC conduit pipe of any size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sub-main wiring with two run single core cables PVC insulated and un-sheathed standard copper conduction of cable of size 6 sqmm (Nominal Area) with one run of PVC insulated unsheated copper cable of size 6 sqmm duly connected with earth dolly the sub main wiring will be done in existing PVC conduit pipe of any size complete all as specified and directed by Engineer-in-Charge.

Material and labour in replacement of PVC insulated multi stranded aluminum conductor PVC cable sheathed 1.5 Sq mm single core and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by the engineer in charge.

S& F PVC non metallic rigid conduit 20 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive all tees bends, reducer, bell mouth tube ends and fixing accessories concealed after cutting, chases in wall floor making good all disturbed surface, matching with existing surface conduit hooks, screw washers & connection/ drawing colour washing etc. complete all as specified and directed by Engineer-in-Charge.

S& F PVC non metallic rigid conduit 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive all tees bends, reducer, bell mouth tube ends and fixing accessories concealed after cutting, chases in wall floor making good all disturbed surface, matching with existing surface conduit hooks, screw washers & connection/ drawing colour washing etc. complete all as specified and directed by Engineer-in-Charge.

S&F cutting chases pinning in wall floor making good to facing all disturbed surface, matching with existing surface and pointing in cement mortar 1:3 to ends or edge of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for conealed water tubing or concealed conduit wiring etc and making good exc 10cm but not exc 20cm etc complete all as specified and directed by Engineer-in-Charge.

Supply, fixing and testing LED street light fitting of 25 Watt including LED lamps complete with body robust, corrosion, resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP-65 protection as per IS-10322-1982 (Part-I) with latest amendments and input voltage range 140-300V, AC, frequency 50-60 Hz, PF should be more than 0.9 with total harmonic distoration THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fittings should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC. Driver should also have double phase protection, no load, open circuit and short circuit protection. LED light fittings should be suitable for ambient temperature from - 10 degree centrigrade to 50 degree centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/ toughened glass to ensure minimum IP 65 degree protection cover should not degrade due to heating and ageing. The efficient of LED luminaries system shall be more than 85 lumens per watt and must be certified by LM-79 test report complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/ Havells/Philips or equivelant Note :- (a) Bidder shall submit rest report of LED street light fitting from accredied test laboratory for LM-79 (b) Bidder has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following cases : - (i) Manufacturing defects, (ii) Failure due to mechanical and electrical impact, (iii) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/ luminairies. (c) All LED light luminaire must meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/ Section 13 (d) scope of work shall include supply and fixing street light fittings on poles which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. Note: Every light fitting will be warranty 5 years after completion of CA and replacement/defects as applicable should be complied/rectified within 7 days .

Supply & fixing electronic energy meter tamper proof with LCD display with Class 1 accuracy single phase 240 V, 10 to 60 Amps capacity complete and all as directed by Engineer-in-Charge.

Supply & fixing multi function electronic energy meter tamper proof class 1.00 acuracy with LCD display with Class 1 accuracy single phase 240 V, 5 to 40 Amps capacity complete and all as directed by Engineer-in-Charge.

Supply & fixing Meter box for single phase electronic energy meter fabricated from 8mm CRCA sheet of size 306mmx143mmx120mm complete and all as directed by Engineer-in-Charge. Make : ESTERA / C&S / HPL

S&F in replacement of bakelite laminated sheet 3mm thick of size 10" x12'' including cutting of sheet for fixing switch complete all as specified and directed by Engineer in Charge.

S&F bakelite laminated sheet 3mm thick of size 8" x5'' including cutting of sheet for fixing switch complete all as specified and directed by Engineer in Charge.

S&F bakelite laminated sheet 3mm thick of size 5"x5'' including cutting of sheet for fixing switch complete all as specified and directed by Engineer in Charge.

S&F in replacement of condenser 2.5 Mfd AC 240V (for 1200mm size ceiling fan), complete all as specified & directed by Engineer in Charge.

S&F in replacement of condenser 3.15 Mfd AC 240V (for 1400mm size ceiling fan), complete all as specified & directed by Engineer in Charge.

S&F in replacement of condenser 4.0 Mfd AC 240V (for 350/450mm exhaust fan), complete all as specified & directed by Engineer in Charge.

S & Fin replacement of flexible cable 2 core 23/0.0076 copper conductor complete all as specified and directed by Engineer in Charge.. Note :- A Sum of Rs. 52483.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 31 (Schedule of credit) of Tender Documents.

M/S RAJESH KUMAR and CO.

M/s Balvinder Singh Engineer and Contractors

NEW AMRITSAR CONSTRUCTION COMPANY

M/s Surjit Singh and bros