SPECIAL REPAIR REPLACEMENT OF CI PIPE LINE TO DI PIPE LINE FROM LIKABALI TO JEEVIKA SWIMMING POOL UNDER GE BRICHGUNJ PORTBLAIR

Amount

Excavation in trenches not exceeding 1.50 m wide and n.exc. 1.50 m deep and hard and dense soil and getting out for laying of LT cables all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers n.exc. 25cms in soil all as specified.

Removing surplus soil not exceeding 50 m and depositing where directed by Engr-in –Charge at a level not exceeding 1.5 m above the starting point.

labour only for Cutting existing 300mm bore water fro drawing 100mm bore branch by inserting 300x 300xx100mm tee, including excavation and return filing and removal etc. complete all specified and as directed.

Taking up CI water mains 100mm bore of pipes including all fitting with spigot and socket ends and lead joints including burning out joints and recovering lead completed all as specified and as directed.

Supply, lay in trenches, connect joint test and commission of 100mm dia pressure pipes, centrifugally cast (spun) class K-9 with socket and spigot spigot ends conforming to IS -8329 including push on rubber gasket joint with inside morter lining and black bitumen external coating complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Necessary PCC supports for on ground pipes will be measured and pipe separately (i) Rate quoted is inclusive of site clearance i.e vegetation clearance/jungle clearance.

Supplying, fixing and testing of DI, heavy duty, Specials of any size, radius and length confirming to IS - 1538 Part - I to XXIII: 1976 tapers any type such as [straight, bend, increasing, decreasing or double socket etc], sockets, tail pieces, connecting pieces, tee pieces, single branch, "Y" junction, double branch, cross, [all sockets or socket and spigot or Flanged], collars, caps and plugs, ( required for shape as per site ) adopters etc suitable for CI / DI Spigot and Socket or Flanged pressure pipes complete all as specified and as directed.

S & F in repairs Air release valve 100mm bore of pipe confirming to IS -14845, with 2 Air Outlets of 25mm bore with suitable Flanges , GI pipes of medium grade 25mm bore , MS clamps, Including all Joints with rubber Gasket and Jointing Materials Bolts Nuts Washer complete all as specified and directed.

S&F in repairs Air Release Valve, 100 mm bore of pipe conforming to IS - 14845, with 2 Air Out lets of 25 mm bore with suitable Flanges, GI Pipes of Medium Grade 25 mm bore, MS Clamps, including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed by Engineer-in-Charge.

M&L for Construction of Valve Chamber of size 900 X 900 X 900 mm internal size suitable for Sluice Valve, with PCC (1:4:8), Type D2, using 40mm graded stone aggregate for foundation, 200 mm thick Precast Cement Concrete Solid Block Masonry of (1:3:6) Type C1 using 20mm graded stone aggregate in Cement Mortar (1:6) 40 mm thick PCC, (1:2:4) Type B1, using 20mm graded stone aggregate Coping, rendering in CM 1:4, 15 mm thick including provision of Mild Steel Sheet Cover 3 mm thick with 40 X 40 X 6 mm size Angle Iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary earth work excavation in any type of soil etc., removal of surplus soil and rubbish not exceeding 50m distance and including demolition of old Valve Chambers of any description complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC (1:2:4) Type B-1, using 20 mm graded stone aggregate as in foundation, filling mass concrete, for supporting / encasing of DI Pipes of any description, Pilasters, Columns, Pillars, Buttresses, Boundary Pillars and Posts including necessary form work etc complete all as specified and directed.

M&L for Run Lead joint confirming to IS specifications for CI/DI pipes of 100 mm bore complete all as specified and as directed.

M&L for Cutting Bittumen Road Hard top at site as required for Laying of Pipe line and making good of disturbed surface as per existing top with 20/40mm graded stone aggregate and bitumen layer etc after repair work complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.(plinthprotection)

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

S&F GI frame work for PVC ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with Gleat and steel expansion fasteners with and including wall section of 0.55 mm thickness having kurled web of 50 mm and flange of 28 mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre fixed with joining for ‘J’ trim & ‘T’ Section including hanging of 6 mm dia GI (upto 1200 mm length) adjusting level finished to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases,

M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement.

M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes.

M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in wall surfaces(skirting/daddo) set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick in Cement mortor 1:4 all as specified and directed.

M&L Rendering 10mm thick on internal sides wall of Brick / Concrete Surfaces in CM (1:6) finished even & smooth without using extra cement.

M&L Rendering 15mm thick on sides of wall of Brick / Concrete Surfaces in CM (1:6) with level plast including 3 to 5% of water proofing compound finished even & smooth without using extra cement.( Note Waterproofing compound and level plast paid separately) Complete all as specified and directed.

Supply only integral WPC

M&L Rendering 10mm thick on concrete surfaces such as sofit of slab, chajja etc in CM (1:3) finished even & smooth without using extra cement.

Materials and labour for Preparation of New plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .

Materials and labour for complete removal of existing treatment on walls and applying one coat of Putty to make the wall surface in plumb line and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on coat of external wall putty on walls all as per manufacturer instruction and as directed by Engineer-in-Charge.

M& L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

Taking down chowkats or frames exceeding exc 1.5 sq. m but n exc 4 sq. m each (Without taking off shutters & Grill from the frame).

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and fixing factory-made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless-steel screws, joints mitered and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each pane

M&L for 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21

S&F 200mm Aluminium anodised barrel tower bolts of extruded sections.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

S&F of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fittings fixed to walls and ceilings or laid in floors complete all as specified. Outer diameter of pipe in 20 mm

All as per item no 45.00 here in before but Outer diameter of pipe in 25 mm

S & F in repairs1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position all as specified in SSR Part I

S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No KUP-CHR-35053PM.

S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No QQT 7053.

S&F in repairs two way bib tap with wall Flange Make: Jaquar Cat Part NO QQT 7041 screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge.

S&F in Repair 6mm thickness looking mirror bevelled Edge mounted on bracket as necessary brequirement with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge..

S&F in repairs Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes.

S&F in repairs Chromium Plated Steel Grating of Jaquar Square Shape Body Shower, For Bathroom, Model Name/Number: Make: Jaquar Cat code no BSH-CHR-1751

S & F in Repairs Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook Make: Jaquar Cat code No ALD-CHR-573 Complete all as specified and directed

Supply and fix vitreous china CASCADE type WC single piece-WC with PP seat Cover, hinges, fixing accessories set, cistern fittings complete of size 640 x 360 x 690 mm , P trap-180mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent .

S & F in Repairs Bib Cock Make: Jaquar Cat Code no QQT 7073 complete all as specified and directed.

S&F in repair Oval shape vitreous china white thin Rim table top basin of size 500x380x120mm with 32mm waste coupling brass chromium plated suitable for wash hand basins all as specified and directed by Enge-in-Charge. Make: Jaquar Cat code No JDS-WHT-25937

S & F in Repairs Bottle trap 32mm dia Make: Jaquar Cat code No ALD 769L250X190 complete all as specified and directed

S&F vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe, Spreader and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs SS Towel holder all as specified. Make: Jaquar cat code no. AQN7711

S & F in Repair corner Glass Shelf with Bracket all as specified and directed Make: Jaquar Cat ACN 1173

S & F in Repair Towel Ring Round Complte all as specified and directed. Make: Jaquar Cat AQN 7721

Supply and fix brass CP 15mm dia bore Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size also available complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.FLR-5167NB

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts .

S&F in Repair Jaguar Toilet Paper Holder Make: Jaquar Cat Part No AQN 7751 all as specified and directed by Engineer in charge. .

S&F in Repair Jaguar Glass Shelf 550mm long Make: Jaquar Cat Part No AQN 7771 all as specified and directed by Engineer in charge. .

S&F in Repair Jaguar Model No 111Q UC Curved Shapped Urinal Patriation with toughened Glass 10mm thick finish chrome incl fixing with ss Brackets Make: Jaquar Cat Part No JSE CHR 110UC 450X all as specified and directed by Engineer in charge

S&F in Repair 20mm thick marble tiles machine cut in skirting/dado/ Cooking Plate form / Table Top laid over cement screed and jointed with grey cement slurry including cutting and polishing of type all as specified and directed by Engineer in charge. ( Note :- Colour/ Shade is finalized by GE)

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts .

Taking down PVC waste ,vent,rain water pipes incl fittings in any position

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor.

S&F 75mm dia outlet PVC (SWR) PVC (SWR) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) Gully trap 125/110 mm,seting and incl joining with solvent cement

S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors.

S&F 75mm dia PVC (SWR) bend with oval access door

S&F 110mm dia PVC (SWR) bend with oval access door

S&F 75mm dia PVC (SWR) bend with oval access door

S&F 110mm dia PVC (SWR) bend with oval access door

S&F PVC (SWR) cowls 100mm dia.

M&L for precast man holes cover slab with 1:2:4 type B1 using 20mm graded stone aggregate set in CM 1:4 incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc

M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 5 mm thick in one layers on concrete surface cement sand mortar 1:3 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:WPC will be measured and paid separately.

M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete

M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the likeall as specified and directed

Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces.

TMT bars 10 mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia

M&L Mild steel TMT bars 5mm dia and over up to and including 10mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia.as in stirrups, spacers, binders and the like

Use and waste of form work to sides and sofit of Beams for Fair finished surfaces.

M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span as specified and directed

M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty as specified and directed.

All as per item no 95.00 here in before but on Ceiling surfaces

M&L preparation of old plastered surfaces of ceiling and applying two coats of Oil Bound distemper over a complete as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce.

M&L 100mm thk Cement concrete type B-1, 1:2:4 (20mm graded aggregate)as in flooring

M&L Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

All as per item no 100.00 here in before but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified

M&L for Heavy duty Vitrified tiles of size 300x300x8 to10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L second class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F 35mm thk Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified.

S&F Stainless steel IMAX hinges for aluminium window shutters all as specified.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified.

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified.

S&F 100 mm long extruded aluminium alloy anodised handles fabricated type complete all as specified.

M&L Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.

M & L for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC casing suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty.complete all as specified and as directed by Engineer-in-Charge. One light point/Exhaust fan controlled by one way switch

One 3 pin switch socket outlet point 5 amps on independent board.

All as per item no 113.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix of switch piano flush type single pole one way 5 Amp all as specified and directed.

Supply and fix switch socket combination 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

S&F Street light New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs 35 w as light and electronic driver complete all as per with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

Supply and fix exhaust fan steel body suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified

Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.complete all as as specified and as directed.

Supply and fix exhaust fan suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1200 RPM,with steel metal body ,incl louvers complete all as specified

Supply and fix sheet metal enclosures Loadline distribution board TPN, 4 ways 415 volts, with 200 amps rated bus bar, with IP 42 protection and double door complete all as specified and as directed including taking down old MCB DBs complete including cutting chases pinning in making good to facings where required and pointing in cement mortar 1:3 ends of edges of landing,steps, cills sunsades,shelves,lintels,etc and cutting for concealed conduit wiring etc and making good,cutting not exc 10 cm girth in brick wall complete all as specified.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP and 63 A current carrying capacity in the DB complete with connection testing and commissioning,complete all as as specified and as directed.

M & L for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 2.5 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories, complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of 16 sqmm 4 core complete all as specified and as directed.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

SKV Engineering

M/s Karbhagam Sales Agency

AMR TRADERS

CHANDER SEKER ENTERPRISE

SHUSHANT ASSOCIATES