Karnataka

AOC

Works

Buildings

Providing Mezzanine floors, antichamber, male and female toilets, flooring, painting, office tables, chairs and other allied Electrical works to room No. 16B at Ground floor of Vidhanasoudha, Bengaluru.(Reserved for SC)

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Karnataka

Amount: ₹50.6 LCloses: 8 Jan 2026Closed

Timeline

Published31 Dec 2025
Closed8 Jan 2026
Awarded—

Bids

1 Bid8 Jan 2026

#	Company	Amount	Status
1	M VENKATESH ₹38.5 Laccepted-aoc	₹38.5 L	accepted-aoc

Tender Value

₹50.6 L

EMD Value

₹50,600

Closing Date

8 Jan 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

Providing Mezzanine floors, antichamber, male and female toilets, flooring, painting, office tables, chairs and other allied Electrical works to room No. 16B at Ground floor of Vidhanasoudha, Bengaluru.(Reserved for sc)

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT30382

Reference Number

PWD/2025-26/BD/WORK_INDENT30382

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredAnnual turnover certificate along with UDIN

RequiredReserved Category certificate along with Domicile certificate for having been a resident of karnataka for not less than 10 years issued by the competent authority

RequiredBid Capacity Calculation as per KW Document

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Agency Should upload Employees provident fund (EPF) & ESI registration certificate, and also should upload copy of receipt for the payment made for the same

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-3 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should be a reputed company registered as a Class III and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-3 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

Domicile certificate for having been a resident of karnataka for not less than 10 years issued by the competent authority

The Quoted Rates Shall be Excluding GST

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b) Satisfactorily completed as prime contractor for at least in any construction work to an extent of 25% of the cost of the work i.e. Rs 12.65 Lakhs

Work Done Certificate

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-25) (c) Executed in any One year, the minimum quantities of work as follows : (1. chairs/Table -7 Nos),(2. Steel work in built up tubular trusses-2575 kgs),(3. Storage Unit-9 nos),(4.flooring-85 sqm),(5.False ceiling-32 sqm)

Work Done Certificate

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-25) (e) The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/KUWS&DB and should have executed similar water supply/sanitary engineering works in the last five years i.e (2020-21to2024-25) totaling Rs 1.30. lakhs in any one year.

Work Done Certificate

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-25) (d)The Tenderer or his identified sub-contractor should possess valid electrical license for executing electrical engineering works issued by KPWD/Government electrical inspectorate and should have executed similar electrical engineering works totaling 3.69 in any one year

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least One financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 50.60 lakhs

Audited CA Certificate of Annual Turnover

3.3 Each Tenderer should further demonstrate: (b)Liquid assets and /or availability of credit facilities of not less than: Rs.15.18 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/Scheduled banks) for meeting the fund requirement etc.

Line of Credit

Financial Status

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5-B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 months. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 2 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity calculation

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,270

EMD Fee Amount

₹50,600

Important Dates

Last Activity

8 Jan 2026

Published

31 Dec 2025

Bid Opening

9 Jan 2026

Download Ends

3 Jan 2026

BOQ Preview

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co...

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

•

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at require...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a...

•

Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - ...

•

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & a...

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 32 mm dia

•

Providing and fixing German Polyamide flexible connection hose with winged nuts 450mm with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 125x85x5.5 mm (heavy type)

•

Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 125 mm

•

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 150 mm length

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 100 mm length

•

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous c...

•

Providing and laying "Kajaria" brand or equivalent first quaility premium colour dual charged vitrified tiles of 1000x200x10mm fixed over existing flooring with special roff adhesive for flooring and ...

•

Moisture resistant Gypsum Boards : Providing and fixing Moisture resistant Gypsum board false ceiling of thickness 12.50mm connecting to G I perimeter channel all-round the perimeter of the false ceil...

•

Supplying and fixing Gaberit make flush tank of Model KF WC SIGS H-169 90/110 (Code No. 110.792.00.1) with Gaberit actuator S.S Plate sigma 20 for flushing (Code No. 115.882KH.1) including covering th...

•

Supplying and fixing JAQUAR MAKE table top basin Model no. JDS-WHT-25909 including cost of all materials, labour charges with all lead and lift, loading and unloading, transportation and all other in...

•

Providing and fixing approved make white vitreous china clay Urinal Basin of size 34.50 x 33 x 69 cms with Flow Sensor, Fixed with C.I/M.S. brackets, standard flush pipe with brass unions and G.I. cla...

•

Providing and fixing of zebra blinds including cost of all materials, labour usage charges of machinery, transportation and all other incidental charges etc., complete as per the directions of the Eng...

•

Providing and fixing Stainless steel staircase railing with Toughened Glass with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16guage toughened glass to be fix be...

•

Supplying and laying of self levelling up to 3mm thick with epoxy. The top surface must be clean. The work should complete including cost of all materials, labour, lead and lift and as per the directi...

•

Wooden flooring : Providing and laying of Engineering wooden polished flooring of 12mm-14mm thick, high density timber or approved colour and design with end trims, transition, profiles, beading, 15mm...

•

Providing and fixing ornamental cornice made out of plaster of paris of 100mm width making the template and casting the cornice, then fixing the same in to the roof level with necessary G.I. frame wor...

•

Providing and fixing M.S. Storage Unit of Size 1200 x 480 x 900mm ht. as per the drawing, whole body of the unit is made up of M.S. Sheet CRCA metal of 1.6mm thick MS CRCA powder coated chrome finish...

•

Providing and supplying Contemporary style pinnable executive high back chair, black colour mesh & fabrics, height adjustment with chrome steel base along with twin castor wheel gas lift made up of MD...

•

Supplying and fixing 8mm thick bronze glass of approved make including, cutting the glass to the required size and shape machine grinding, edge polishing complete. The rate including cost and conveyan...

•

Supplying and fixing Name Boards made out of Approved Quality Stainless steel Board with HD Vinyl Letters, Fixed with necessary screws, complete. Including cost of all materials, labour charges, HOM o...

•

Providing and fixing Workstation Table of size 1200x600x750mm with MS Powder Coated Legs and provision for cable manager and PLPB Table top Edge Covered PVC Beading of Featherlite of Equivalent make, ...

•

Electrical works

•

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case...

•

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wi...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wi...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit CC floor

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps one way.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket.

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, ...

•

Supply of 1x1 LED recessed luminaire with ...Watts system wattage. Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester power coated. Driver operates with v...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,...

•

Supplying wall mounting fan suitable to operate at single- phase 230v AC.supply.400 mm Sweep

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)

•

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, c...

•

Supplying and drawing UTP-CAT 6E LAN cable.

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 5Pair

•

Supplying fixing of Network Switches Single I/O

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager. 9U with 450mm depth

•

Supplying fixing of Network Switches. 24 Port Gigabyte (manageable)

•

Supplying & Fixing of Patch panel for LAN cabling. 24 Port 10/100 patch panel

•

Supplying, installing, wiring and commissioning of IP 4 Megapixel IP Doom camera housed in alluminium body, 1inch size CCD Image Sensor, 1inch, D1 (704 x 480 Pixel) ,HD (1280 x 720 Pixel) ,Full HD ...

•

Supplying, installing, wiring and commissioning of Network Video Recorder (NVR) with the following features: NVR should support IP fixed/PTZ Camera, Alluminium Housing construction, Number of Video In...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

30383 kw3 31-12-2025 corrected.docx

Tender Document • 1.19 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M VENKATESH

₹38.5 Laccepted-aoc